Cyanight's Customizations

@manincellv awesome looking map!

@Midnight_Reaper Thanks. These are cool but not exactly what I am looking for. I will keep looking as I don’t know if it is ok to post a picture of the map here to show you exactly what I mean. The Canadian mapleleaf is good but I am looking for the fascist Italian roundel, the Russians have a star instead of the traditional OOB, the German iron cross is similar except that the background is grey instead of red and then ANZAC has been modified with a blue circle emblem. I am also new to all of this so if it sounds like I don’t know what I am really talking about…that is because I dont really know what I am talking about.:grinning:

@SS-GEN

Will do. Thanks

Thank you for the information @vodot . Yes the AAA infantry pieces would be hard to print.
Looking at an 3D printer like the ANYCUBIC Photon S 3D Printer, UV LCD Resin Printer with Dual Z-axis Linear Rail and Upgraded UV Module & Print Quietly and Off-line Printing, Build Size 4.53"(L) x 2.56"(W) x 6.49"(H).

https://www.amazon.com/ANYCUBIC-Photon-Upgraded-Off-line-Printing/dp/B07RY6NSL8/ref=sr_1_7?keywords=3d+sla+printer&qid=1576351692&sr=8-7

I think this one will do well with most AAA pieces.

Thank you for the positive feedback! I forgot to say that in the previous post, and it’s very important that I do. It’s very encouraging and motivating to get good feedback, and we certainly appreciate it. The above mentioned four Essex class carriers are complete, a long with several other ships of the US Navy, so its time to update the thread. Just ships by FOlewnik in this post. More aircraft are almost done but I haven’t put magnets in them yet (so not really done), so no aircraft pictures this post.

We’ll start with the two “odd men out” of the HBG sculpt Baltimore Class Heavy Cruisers. Why “odd men out”? Because in the below picture we have on the left, the USS Unnamed Baltimore Class Cruiser Wearing Measure 31a, Design 9C, and on the right is the USS Columbus (CA 74), which wasn’t commissioned until June 8, 1945. The cruiser with the long name is wearing a design that was never used, but was taken from a period design found at https://www.wikiwand.com/en/World_War_II_US_Navy_dazzle_camouflage_measures_31,_32_and_33:_cruisers. The USS Columbus is wearing a Measure 12 Modified designed by FOlewnik to match the pieces we’ll be using for the US Atlantic fleet. These will get aircraft added, but at the time of the photographs the decals on the wings of the aircraft were drying.
DSC_0510a.jpg
DSC_0511a.jpg
DSC_0512a.jpg
Pattern_sheet,_MS-31a_9C_for_Baltimore_class.jpg

Next up are some metal destroyers from GHQ. Below on the left, the very brave USS Johnston (DD-557) painted in MS-3_/6D as it looked when it was “Sunk by Japanese Warships off Samar October 25 1944,” and next to it is USS Van Valkenburgh (DD-656) painted in camouflage Measure 31, Design 9d. All Wartime photos taken from Navsource.org, a great resource for US Navy history buffs.
DSC_0514a.jpg
DSC_0515a.jpg
DSC_0516a.jpg

Below, the real USS Johnston shortly before her final battle, and the official design sheet:
DSC_0516a0555715.jpg
Pattern_sheet,_MS-31-32-33_6D_for_Fletcher_class.jpg

A great wartime picture of the USS Van Valkenburgh, which is the same on both sides:
DSC_0516a0565603.jpg

Now on to these two. From GHQ, USS The Sullivans (DD-537) painted in Measure 1, and the HBG sculpt light cruiser USS Marblehead (CL-12) who always wore Measure 2 throughout the war. If I can get FOlewnik to put the Shamrock on the first stack of The Sullivans when he puts the scout aircraft on the Marblehead, as seen in the below wartime photograph, I’ll come back and edit the post.
DSC_0520a.jpg
DSC_0522a.jpg
DSC_0519a.jpg
DSC_0520a0553740.jpg
DSC_0520a0401208.jpg

The post previous to this post showed four Essex Class sculpts from HBG getting prepped and started with a base coat. Those are now completed and I had too much fun playing with them and the aircraft (that are complete so far) while I was taking photographs. I’m pretty sure I didn’t make any wooshing sea or aircraft noises or FOlewnik would have laughed at me. I was tempted though, and here’s why:
DSC_0524a.jpg
DSC_0525a.jpg
DSC_0526a.jpg
Above we have the first of the Long Hull Essex Class, USS Ticonderoga (CV-14) on the left looking as she did after her April 1945 refit from suffering a Kamikaze Attack on January 21, 1945, and USS Bunker Hill (CV-17) on the right. The Bunker Hill is wearing Measure 33, Design 6A, of which Navsource says, “Her port side camouflage pattern was the most intricate design applied to any carrier.” One glance can confirm that!
DSC_0526a021772.jpg

The final two Essex Class carriers are the USS Essex (CV-9) herself, and the USS Bennington (CV-20). The Essex is wearing a unique pattern, Measure 32v6, Design 10D, adapted from a destroyer pattern specifically for the long hulled Essex. The Bennington is painted in Measure 32, Design 17A.
DSC_0527a.jpg
DSC_0528a.jpg
DSC_0529a.jpg
DSC_0529aPattern_sheet,_MS_32a_17A_for_Essex_class.jpg
DSC_0529aUSS_Essex_(CV-9)_in_MS_32_6-10D_camouflage.jpg

Finally, some group pictures just for fun:
DSC_0531a.jpg
DSC_0532a.jpg
DSC_0533a.jpg
DSC_0534a.jpg
Thank you for checking out the post! If you liked it, please click the little heart. I’m trying to figure out why our post is only rated with a 2 when it seems it should be a bit higher if the other likes are any indication.

@siredblood

Hello,

I wanted to print some of the really cool Axis and Allies money but cannot find the files that people are referring to. I tried the link but there was no file. Can anyone help ?

Thank You.

I’ve gotten several private messages and some responses in this thread… so just as a head’s up and a community service…

Because of the private messages, I have ALREADY made a deal to unload my custom units, and they are, in-fact, already mailed off.

I know its kinda pointless now, but if you’re still that curious as to what I did have, here’s the complete list of the custom HBG units I had purchased in the last few weeks to beef up my bins… since I later made a decision to pull them and not use them, I did eventually re-order equivalent numbers of default/original OOB A&A units from HBG to beef up my numbers (like if I didn’t like the two HBG Japanese Fuso battleships, I reordered two OOB Kongo or Yamato battleships to replace them… so-on and so-on.  Anyways, here’s the (now kinda pointless) list:

(BTW: you may notice that for the most part, planes are missing from this list… I found most custom HBG aircraft to be good enough and scaled well enough to survive my “off-scale axe”.  So there are many HBG planes like P-47s and F4F/Hellcats that survived the cut and made it into my permanent bins)

HBG Battle Pieces (custom units)

US - Olive Drab:
5x Pershing Tanks
5x M5 Stuart tanks
15x M4A3 Sherman tanks
5x P-51 fighters

5x Essex CVs
5x South Dakota BBs
2x Nevada BBs
5x Baltimore CAs

UK - Tan:
10x Churchill Tanks
10x Valentine Tanks

5x Ark Royal CVs
3x King George V BBs

Russia - Brown
2x KV-2 tanks
11x T-34 tanks
4x T-26 tanks

German - Black
2x Schleswig Holstein BBs
2x Seydlitz CVs
8x Pz-III tanks

Japan - Pumpkin Orange:
10x Type 97 tanks
5x Ki-43 fighters
2x G8N Rita bombers

2x Kaga CVs
2x Ryujo CVs
5x Nagato BBs
2x Fuso BBs
5x Mogami cruisers
5x I-400 subs

MyHBGrejects.jpg

See this thread…

http://www.axisandallies.org/forums/index.php?topic=21305.0

…for the picture-posting procedure I copied below.  I don’t know the minimum number of posts needed for the attachment feature to become available, but I think it’s around 10 to 15.

At the bottom of the posting screen, click “Additional Options…”.  Use the “Browse” button next to the Attach window to find in your computer’s file directory the picture you want to load.  Click on “(more attachments)” if you want to load more than one picture.  Maximum attachment size allowed: 256 KB, per post: 3.