Cyanight's Customizations

@sweetchops27 Surprised that Senussi isn’t on here as an Ottoman-Aligned Territory (land area could be in-between Cyrenaica and Egypt) . If you don’t want to add more territories, you could very well replace Cyrenaica with it and make it north and south instead of west and east.

Nice work @ari236

@Playing-Kid said in My First Custom Map:

You can use Gimp as a great free software to make your maps

And I agree with Gimp. That’s the tool I used for working on my map files.

Thank you for the positive feedback! I forgot to say that in the previous post, and it’s very important that I do. It’s very encouraging and motivating to get good feedback, and we certainly appreciate it. The above mentioned four Essex class carriers are complete, a long with several other ships of the US Navy, so its time to update the thread. Just ships by FOlewnik in this post. More aircraft are almost done but I haven’t put magnets in them yet (so not really done), so no aircraft pictures this post.

We’ll start with the two “odd men out” of the HBG sculpt Baltimore Class Heavy Cruisers. Why “odd men out”? Because in the below picture we have on the left, the USS Unnamed Baltimore Class Cruiser Wearing Measure 31a, Design 9C, and on the right is the USS Columbus (CA 74), which wasn’t commissioned until June 8, 1945. The cruiser with the long name is wearing a design that was never used, but was taken from a period design found at https://www.wikiwand.com/en/World_War_II_US_Navy_dazzle_camouflage_measures_31,_32_and_33:_cruisers. The USS Columbus is wearing a Measure 12 Modified designed by FOlewnik to match the pieces we’ll be using for the US Atlantic fleet. These will get aircraft added, but at the time of the photographs the decals on the wings of the aircraft were drying.
DSC_0510a.jpg
DSC_0511a.jpg
DSC_0512a.jpg
Pattern_sheet,_MS-31a_9C_for_Baltimore_class.jpg

Next up are some metal destroyers from GHQ. Below on the left, the very brave USS Johnston (DD-557) painted in MS-3_/6D as it looked when it was “Sunk by Japanese Warships off Samar October 25 1944,” and next to it is USS Van Valkenburgh (DD-656) painted in camouflage Measure 31, Design 9d. All Wartime photos taken from Navsource.org, a great resource for US Navy history buffs.
DSC_0514a.jpg
DSC_0515a.jpg
DSC_0516a.jpg

Below, the real USS Johnston shortly before her final battle, and the official design sheet:
DSC_0516a0555715.jpg
Pattern_sheet,_MS-31-32-33_6D_for_Fletcher_class.jpg

A great wartime picture of the USS Van Valkenburgh, which is the same on both sides:
DSC_0516a0565603.jpg

Now on to these two. From GHQ, USS The Sullivans (DD-537) painted in Measure 1, and the HBG sculpt light cruiser USS Marblehead (CL-12) who always wore Measure 2 throughout the war. If I can get FOlewnik to put the Shamrock on the first stack of The Sullivans when he puts the scout aircraft on the Marblehead, as seen in the below wartime photograph, I’ll come back and edit the post.
DSC_0520a.jpg
DSC_0522a.jpg
DSC_0519a.jpg
DSC_0520a0553740.jpg
DSC_0520a0401208.jpg

The post previous to this post showed four Essex Class sculpts from HBG getting prepped and started with a base coat. Those are now completed and I had too much fun playing with them and the aircraft (that are complete so far) while I was taking photographs. I’m pretty sure I didn’t make any wooshing sea or aircraft noises or FOlewnik would have laughed at me. I was tempted though, and here’s why:
DSC_0524a.jpg
DSC_0525a.jpg
DSC_0526a.jpg
Above we have the first of the Long Hull Essex Class, USS Ticonderoga (CV-14) on the left looking as she did after her April 1945 refit from suffering a Kamikaze Attack on January 21, 1945, and USS Bunker Hill (CV-17) on the right. The Bunker Hill is wearing Measure 33, Design 6A, of which Navsource says, “Her port side camouflage pattern was the most intricate design applied to any carrier.” One glance can confirm that!
DSC_0526a021772.jpg

The final two Essex Class carriers are the USS Essex (CV-9) herself, and the USS Bennington (CV-20). The Essex is wearing a unique pattern, Measure 32v6, Design 10D, adapted from a destroyer pattern specifically for the long hulled Essex. The Bennington is painted in Measure 32, Design 17A.
DSC_0527a.jpg
DSC_0528a.jpg
DSC_0529a.jpg
DSC_0529aPattern_sheet,_MS_32a_17A_for_Essex_class.jpg
DSC_0529aUSS_Essex_(CV-9)_in_MS_32_6-10D_camouflage.jpg

Finally, some group pictures just for fun:
DSC_0531a.jpg
DSC_0532a.jpg
DSC_0533a.jpg
DSC_0534a.jpg
Thank you for checking out the post! If you liked it, please click the little heart. I’m trying to figure out why our post is only rated with a 2 when it seems it should be a bit higher if the other likes are any indication.

I just made my own bootleg Italians with Krylon “Classic Grey-” this was a $4 Walmart special.

Between my copies of AAR, AA42, AA41, and AA42.2, I was able to scrounge up more than enough ugly/unique sculpts to give those backward stepchildren of the Axis their own tantalizingly un-purchasable and 1942.2-ready complement of 3 BB (Axis BBs from 41), 5 CA (cut the masts off some small UK/RU BBs from AAR _, 6 TR (axis TR from 41), 8 art (japan AAR) and 4 Bmr (axis '41 bmrs). The rest of the forces are donated with love from AAR Germany, including the 88’s that finally get to serve their intended AAA purposes in the Italian army.

Pictures when I can._

I’ve gotten several private messages and some responses in this thread… so just as a head’s up and a community service…

Because of the private messages, I have ALREADY made a deal to unload my custom units, and they are, in-fact, already mailed off.

I know its kinda pointless now, but if you’re still that curious as to what I did have, here’s the complete list of the custom HBG units I had purchased in the last few weeks to beef up my bins… since I later made a decision to pull them and not use them, I did eventually re-order equivalent numbers of default/original OOB A&A units from HBG to beef up my numbers (like if I didn’t like the two HBG Japanese Fuso battleships, I reordered two OOB Kongo or Yamato battleships to replace them… so-on and so-on.  Anyways, here’s the (now kinda pointless) list:

(BTW: you may notice that for the most part, planes are missing from this list… I found most custom HBG aircraft to be good enough and scaled well enough to survive my “off-scale axe”.  So there are many HBG planes like P-47s and F4F/Hellcats that survived the cut and made it into my permanent bins)

HBG Battle Pieces (custom units)

US - Olive Drab:
5x Pershing Tanks
5x M5 Stuart tanks
15x M4A3 Sherman tanks
5x P-51 fighters

5x Essex CVs
5x South Dakota BBs
2x Nevada BBs
5x Baltimore CAs

UK - Tan:
10x Churchill Tanks
10x Valentine Tanks

5x Ark Royal CVs
3x King George V BBs

Russia - Brown
2x KV-2 tanks
11x T-34 tanks
4x T-26 tanks

German - Black
2x Schleswig Holstein BBs
2x Seydlitz CVs
8x Pz-III tanks

Japan - Pumpkin Orange:
10x Type 97 tanks
5x Ki-43 fighters
2x G8N Rita bombers

2x Kaga CVs
2x Ryujo CVs
5x Nagato BBs
2x Fuso BBs
5x Mogami cruisers
5x I-400 subs

MyHBGrejects.jpg

@CWO:

@Drfrozenfire:

I’m going to probably print a large transparency map based on the board I’ve been designing based on satellite imagery that is in some serious high definition.

If you’ll be using satellite imagery as the basis for your map, will you be keeping the real-world proportions of the land masses and oceans?  The Global 1940 game map, for practical game play purposes, distorts both the size and the shape of various geographic areas.

No, I’ve taken the satellite images and enlarged certain areas so that there is room in places like Europe for the large scale of battle that often takes place there. When I’m done with the map file, I’ll post it here if you’re interested

Regarding prices, here are some quotes that I got from two different Southern California print shops  (I had posted this also on the thread entitled Ambilzi & Grasshopper’s 1940 Global Map)

The first print shop provided the following estimates (note the $52 set up fee):

SET UP:  $52.05 ( digital color file set up, latex printer set up)

48" x 105" vinyl $142.63  print digital color 4/0 on white smooth vinyl (15oz)

48" x 105" canvas  $300.13  print digital color 4/0 on canvas

48" x 105" versa fabric  $273.88  print digital color 4/0 on versa fabric

53" x 116" vinyl  $174.63 print digital color 4/0 on white smooth vinyl (15oz)

53" x 116" canvas $368.13  print digital color 4/0 on canvas

53" x 116" versa fabric $335.88 please note: print cannot be any larger, printing on a 54" rolld

A second set of quotes from a different Southern California printing company for printing on vinyl (the type of material used for advertising banners):

48"x105" ,  white 64" Roland EcoSol Banner, solvent 6 color Roland 4sf  $230.80

53"x116",    white 64" Roland EcoSol Banner, solvent 6 color Roland 4sf  $258.78

56"x122.5",  white 64" Roland EcoSol Banner, solvent 6 color Roland 4sf  $277.42

(I might check on the AliBaba website to see what I can find for printing services in China.  Also, I’m checking on the possibility of printing on upholstery vinyl and marine vinyl).

Wow!  Such cool pieces! (Been awhile Paul)  And there’s others I’ve yet to see that are posted -