Cyanight's Customizations

@The-Captain
I used 3mm thumb nuts drilled out to fit 3mm acrylic rods. I used a number of 3d printed jigs for cutting the rods, assembly of the stands and gluing the magnets. If I remember later I’ll attached some pictures of the jigs/stands

Sorry only just saw this

So step one would be finding the right image editing program for what you’re trying to achieve. TripleA uses raster graphics images (basically png) and is not suitable for printing. Upscaling the largest relief I’ve made in tripleA and trying to print it at 600 dpi the filesize gets quite beefy. Basically an image that’s like 50mb for use in tripleA is going to climb way up by orders of magnitude into the many gigabytes. It will also tax the RAM pretty hard if you’re trying to edit an image that large (in actual dimensions) like trying to use multiple layers at once. I have a pretty high end gaming laptop and I topped out around 8000p before GIMP started giving me headaches and slowing to a crawl.

What you probably want is an image that you can manipulate as SVG rather than PNG. A vector so you can upscale the image to any dimensions that way (basically the same way font works.) I would try Inkscape or Adobe, and try to get a pull of the image as a vector graphic.

You can start the same as you would in tripleA by creating a baseline image of the basic world map, the continent contours or world warp you want and the territory or sea zone divisions, showing just the basic borderlines in 100% black at 1px width at the desired dimensions for the digital thing.

A physical print would be much larger, so imagine that on your screen you got 72p per inch, on paper that needs to be 600 dpi. You can go lower say 300 dots per inch if it’s very graphic, but a photo quality print is basically like 600p, which is pretty hefty. In a program like inkscape or illustrator etc you can translate a raster image into something that works for stuff like signage, you know, so like making a giant banner image to put on the side of a truck or hang outside a building - same sorta deal here for the scale of the image you’d want to make. Probably the size of a 6 or 8 foot banquet table, possibly larger depending, on what you’re trying to pull off.

If you have the map drawn out at scale, you can scan in sections at A3 or A4 size with a flat scanner and then reassemble the image, to pull it at the highest resolution you can before bringing that image into inkscape to create a vector of it.

ps. here are some youtube tutorial videos on inkscape just to see what sort of stuff I mean. You can probably find more just pulling at those threads. Once you have a map design you can put in tripleA to playtest it by creating a baseline from your svg, exporting the image as a bitmap or png where the borderlines are just solid black ideally at 1px width for those lines, or as close as you can get. For a map image something that’s like 2000-4000p tall and about twice as wide or larger works well for digital sculpts which are png images at 48-54px tall up to 125% currently in tripleA. The map size in tripleA is sorta limited by the unit graphics sizes and the windows in the UI. In inkscape you can make it larger, like for whatever makes sense to have the print look decent. Anyhow, just a quick example you can skip around to see

https://www.youtube.com/watch?v=6Ns028ihACs&list=PL_NagE_y_IhIBNAzw3nFBiF01OKnaltmJ

https://www.youtube.com/watch?v=DnqtnSTe6qM

https://youtu.be/kS2nrXuR128?t=2611

for tripleA you can use GIMP to make the relief images in png. Here’s an example of similar videos in that program

https://youtu.be/HLmOpEETjEo?t=646

Added Russian Fighter and more Japanese Carriers on the website.

Also on Ebay.

www.combatminiatures.org

3 pak.jpg
3 pak.jpg

Appreciate the comments. You must have been busy the last few days. Haven’t seen any of your work.

Are you and your friend painting anything, this week?

Just had your G40 deck from ArtsCow delivered to Wales. They look great and will be very useful for our group as we’ve only played G40 once before and AA50 a handful of times. Thanks for making them available 😊

I did have one question, what are the numbered naval cards for? I’m assuming it’s either something to do with damage to capital ships or for easier tracking of big fleets but I could be wrong on both counts!

Cheers

So very true. When I first started painting my aircraft I had to include decal roundels for the players to distinguish the pieces from one another. My naval units are painted mostly with a color scheme for playability except for the capital ships like the Carriers and popular Battleships. All of them have a decal or flag to show which nation they belong too. I actually replaced the OOB British Cruisers because I thought they looked too close in size with the destroyers. I ended up replacing with some ships I found on Shapeways. The biggest problem I had with naval units is that they can exist in the same seazone with enemy pieces unlike land territories. Because of this I decided to keep the subs, destroyers, cruisers and non unique battleships following a color scheme. There are so many colors in the spectrum though we should be able to come up with a solution that will make them look more historical yet keep the pattern or color scheme for the nation. I really would love to paint all the ships historically and maybe I will revisit them again someday. Every time I go back and repaint my pieces I seem to get better at it. Or at least I think I do, hehe.

@CWO:

@John:

Congratulations to you, and KNP! :-D

Hear hear!

Appreciate it Marc! :-)

Fellow A&A Gamers,

––This thread will eventually contain ALL of the Anzac units that I’ve had detailed & painted by the “WARMACHINE Team”.

––So far the list includes:

ANZAC

ANZAC ARMY
Anzac Infantry
––Anzac (Infantry, Rifle)…(Starting at message #1)
Anzac Armored Vehicles
––M-3 Stuart “Honey” (Tank, Light)…Outback Camo scheme…(Starting at message # )

–-----------------------------------------------------------------------------

Everyone.

----Here are the Anzac Rifle Infantry that Chad Coffman, a.k.a. “Allworkandnoclay”, painted for me. All 20 of the Australian Infantry, nick-named “Diggers”, after their WWI fight at Galipoli, are shown here in a group portrait just after completion by Chad. Note the intricate Anzac ensign he painted on their bases. This guys painting talent is simply awesome! So just sit back, put another shrimp on the barbie, and enjoy, mate.

“Tall Paul”
anzac_inf2b.jpg