Cyanight's Customizations

Check out my video mini-series on my customizations / “how to” on YouTube here:

https://www.youtube.com/watch?v=VhtS9kBOK7s&t=2s (part 1)
https://www.youtube.com/watch?v=qBTC_725LFA (part 2)
https://www.youtube.com/watch?v=_ETQCW_mgh0 (part 3)

please like comment subscribe and/or share!

(still photos are at the end of video 3)

@Quirky-Turtle At least you have an ocean as an excuse. Here it just a truck ride north…

Thank you for the positive feedback! I forgot to say that in the previous post, and it’s very important that I do. It’s very encouraging and motivating to get good feedback, and we certainly appreciate it. The above mentioned four Essex class carriers are complete, a long with several other ships of the US Navy, so its time to update the thread. Just ships by FOlewnik in this post. More aircraft are almost done but I haven’t put magnets in them yet (so not really done), so no aircraft pictures this post.

We’ll start with the two “odd men out” of the HBG sculpt Baltimore Class Heavy Cruisers. Why “odd men out”? Because in the below picture we have on the left, the USS Unnamed Baltimore Class Cruiser Wearing Measure 31a, Design 9C, and on the right is the USS Columbus (CA 74), which wasn’t commissioned until June 8, 1945. The cruiser with the long name is wearing a design that was never used, but was taken from a period design found at https://www.wikiwand.com/en/World_War_II_US_Navy_dazzle_camouflage_measures_31,_32_and_33:_cruisers. The USS Columbus is wearing a Measure 12 Modified designed by FOlewnik to match the pieces we’ll be using for the US Atlantic fleet. These will get aircraft added, but at the time of the photographs the decals on the wings of the aircraft were drying.
DSC_0510a.jpg
DSC_0511a.jpg
DSC_0512a.jpg
Pattern_sheet,_MS-31a_9C_for_Baltimore_class.jpg

Next up are some metal destroyers from GHQ. Below on the left, the very brave USS Johnston (DD-557) painted in MS-3_/6D as it looked when it was “Sunk by Japanese Warships off Samar October 25 1944,” and next to it is USS Van Valkenburgh (DD-656) painted in camouflage Measure 31, Design 9d. All Wartime photos taken from Navsource.org, a great resource for US Navy history buffs.
DSC_0514a.jpg
DSC_0515a.jpg
DSC_0516a.jpg

Below, the real USS Johnston shortly before her final battle, and the official design sheet:
DSC_0516a0555715.jpg
Pattern_sheet,_MS-31-32-33_6D_for_Fletcher_class.jpg

A great wartime picture of the USS Van Valkenburgh, which is the same on both sides:
DSC_0516a0565603.jpg

Now on to these two. From GHQ, USS The Sullivans (DD-537) painted in Measure 1, and the HBG sculpt light cruiser USS Marblehead (CL-12) who always wore Measure 2 throughout the war. If I can get FOlewnik to put the Shamrock on the first stack of The Sullivans when he puts the scout aircraft on the Marblehead, as seen in the below wartime photograph, I’ll come back and edit the post.
DSC_0520a.jpg
DSC_0522a.jpg
DSC_0519a.jpg
DSC_0520a0553740.jpg
DSC_0520a0401208.jpg

The post previous to this post showed four Essex Class sculpts from HBG getting prepped and started with a base coat. Those are now completed and I had too much fun playing with them and the aircraft (that are complete so far) while I was taking photographs. I’m pretty sure I didn’t make any wooshing sea or aircraft noises or FOlewnik would have laughed at me. I was tempted though, and here’s why:
DSC_0524a.jpg
DSC_0525a.jpg
DSC_0526a.jpg
Above we have the first of the Long Hull Essex Class, USS Ticonderoga (CV-14) on the left looking as she did after her April 1945 refit from suffering a Kamikaze Attack on January 21, 1945, and USS Bunker Hill (CV-17) on the right. The Bunker Hill is wearing Measure 33, Design 6A, of which Navsource says, “Her port side camouflage pattern was the most intricate design applied to any carrier.” One glance can confirm that!
DSC_0526a021772.jpg

The final two Essex Class carriers are the USS Essex (CV-9) herself, and the USS Bennington (CV-20). The Essex is wearing a unique pattern, Measure 32v6, Design 10D, adapted from a destroyer pattern specifically for the long hulled Essex. The Bennington is painted in Measure 32, Design 17A.
DSC_0527a.jpg
DSC_0528a.jpg
DSC_0529a.jpg
DSC_0529aPattern_sheet,_MS_32a_17A_for_Essex_class.jpg
DSC_0529aUSS_Essex_(CV-9)_in_MS_32_6-10D_camouflage.jpg

Finally, some group pictures just for fun:
DSC_0531a.jpg
DSC_0532a.jpg
DSC_0533a.jpg
DSC_0534a.jpg
Thank you for checking out the post! If you liked it, please click the little heart. I’m trying to figure out why our post is only rated with a 2 when it seems it should be a bit higher if the other likes are any indication.

@CWO:

@Drfrozenfire:

I’m going to probably print a large transparency map based on the board I’ve been designing based on satellite imagery that is in some serious high definition.

If you’ll be using satellite imagery as the basis for your map, will you be keeping the real-world proportions of the land masses and oceans?  The Global 1940 game map, for practical game play purposes, distorts both the size and the shape of various geographic areas.

No, I’ve taken the satellite images and enlarged certain areas so that there is room in places like Europe for the large scale of battle that often takes place there. When I’m done with the map file, I’ll post it here if you’re interested

@Duff:

I tried to post photos for you but this forum won’t let me post links for some reason.

Because of the forum’s anti-spam software, you need to have a certain minimum of posts (I think it’s 10 but I’m not sure) before the forum gives you the option to post attachments.

@John:

@kcheu:

yes, i know.�  I used to paint small pewter figures for a different game (it’s a D&D nerd here) and because I enjoyed painting them so it might definitely be up next.

I’ve played D&D as well. We are all nerds here, LOL! :-D

Speak for yourself… I’m a geek (which are a lot cooler than nerds).

––Calling “Viracocha”----

––My friend,…it’s been way too long since I’ve heard from you. I ALWAYS enjoy my conversations with you.

Tall Paul

@robbie358:

Hello all.  I thought I would solicit your thoughts on which types of pieces in any version of A&A scream for painting the most.

IMHO, the most confusing piece on the board in the original Pacific and Pacific 1940 is the USA fighter in China.  Having to differentiate between a Chinese fighter that looks American and any USA fighters in that zone seems like a headache waiting to happen.

Otherwise, I would say the pro-Axis and pro-Allies neutrals in Europe 1940 need attention.  The fact is that upon being attacked, you’re supposed to pick any random country to donate an infantry to that territory.  If the attacker doesn’t win, the infantry stay there but cannot be moved.  Seems like confusion might set in eventually.

Your thoughts?

HBG has British infantry for sale. I bought 25 and painted them white to use for neutral armies.