Cyanight's Customizations

Hey everyone,
Sharing my global game now that i’ve spent a good amount of effort customizing it.

Custom Map:
I traced @Tjoek 's map in a website program called “inkarnate” and colored it myself. Then in Gimp I added roundels and labels to everything again using Tjoek’s roundels page for the base roundels. The map is just a tad larger than the OOB map as I unforuntly don’t have a huge space for the setup table. I really like the way it turned out visually as I love the more simple look. This was printed at 200dpi (a little low imo) from an online service in the US called Smartpress on .40 Styrene. It cost $150.00 shipped.
IMG_1717.jpeg
IMG_1723.jpeg

Custom Table:
Table is built out of 2x4’s and plywood. Nothing fancy just a big flat surface.

Custom Chart Board/magnetic roundels:
A small magnetic white board with my custom charts printed on vinyl applied to it. The magnetic roundels are my design as well and are 3d printed.
IMG_1719.jpeg -resized.jpeg)

Battle Board:
3d printed base with a vinyl printed sticker on top designed by me. It incorperates the tech units and combined arms into it.

Money Chips:
These are just cheap chips from amazon and I use white for 1 green for 2 red for 5 and blue for 10. Way nicer in the hand than paper money.

Magnetic Units:
Small magnets 3x1mm glued to almost all planes (japan tac bombers needed the larger 3x2 because of the wheels) using ca glue and activator to set them up quickly. A lot of work to get them all done but very rewarding. Carriers got holes drilled and 3x2 magnets inserted as close to the surface of the deck as I could to get the planes to stick nicely to them.
IMG_1710.jpeg

Flight Stands:
These are made from 3mm thum nuts and 3mm acrylic rod. I designed a number of jigs for accurate cutting, gluing and magnet gluing to get them as cleanly done as possible. They have a 3x2mm magnet glued to the top.

Storage:
All of the unit storage boxes are custom designed to hold chips and roundels nicely. My original designs allowed for all of the bins to fit back in the game boxes but for ease of use I eneded up making more boxes/changing the shape so they no longer would go back into the game boxes.
IMG_1714.jpeg
IMG_1716.jpeg

Troop Placards/Placard Markers:
These are a 3d printed base with another label applied to them. I did crop/adjust the flags so they would all be the same dimensions and I took a lot of liberty with the Anzac one (AUS and NZ mashed up). The markers are the same flag just double sided and small enough to fit into territories nicely.
IMG_1713.jpeg

Facilities and Neutral Troops:
All of the facilities are of my design and are all 3d printed with a .2 nozzle. I did keep them small so they didn’t occupy too much board space. The neutral troops are nice as they blend into the space but still represent the troops in a tactile way.
IMG_1721.jpeg

Roundels:
These are just a simple 20mm circle 3d printed with a 19mm laminated sticker attached. These were punched with a “3/4 paper punch”. Very time consuming but the result is hard to argue with.

@Azimuth yeah, I understand the challenge, I’m a graphic designer and I was playing around with a circular map design when I stumbled upon yours. I still might finish my design as I was incorporating some map changes I found interesting. But so far I think I’ll need some blow up boxes or something to make it work at a reasonable size.

I know this is quite old, but I would love an SVG file of the map at a decently high quality (high enough to distinguish roundels and text). If needed, you can email it to me.

I was guided to this site by a YouTube subscriber, it has some interesting options for trays.

http://www.toolstation.nl/shop/Opbergen/d60/Assortimentskisten+%26+dozen/sd3147

I have lots of customization ideas that I can’t see myself creating due to time, resources, or enthusiasm. However, I would like to share them with this community in the hopes that a customizer will like the idea and create it for themselves. I don’t care for any kind on monetary reimbursement if you make money from it, all I ask is that you share with us pictures of your creation.

Cribbage board design on a wooden Aircraft Carrier model used as an Axis & Allies Income Tracker

My vision is of a wooden model aircraft carrier, and on the flight deck is a cribbage board like design where cribbage pegs are used to track income during an Axis & Allies game. I would use 3 peg holes per numerical value and have each nation represented by a colored peg. Black - Germany, Red - Russia, Orange - Japan etc…

The next group of infantry, will be, DESERT LIGHT INFANTYRY.

Until next time.

Cheers!

John

@Imperious:

You can’t teach this because the learning curve is high for Illustrator CS, You just have to do it and struggle and it may take 10 years to be really good. I do suggest NEVER USE PAINT SHOP PRO. Their is nothing “pro” about it. It will destroy your computer from day one. Also, to save a few hundred bucks, buy an educational version ( its the same) using a student ID, you can just join the school and not even register for classes, just to get the ID and buy the program in the student store–make sure they have it in stock first.

You could register for a night class in basic Photoshop and Illustrator which would get you that student ID card and an introduction to the software.

Regarding prices, here are some quotes that I got from two different Southern California print shops  (I had posted this also on the thread entitled Ambilzi & Grasshopper’s 1940 Global Map)

The first print shop provided the following estimates (note the $52 set up fee):

SET UP:  $52.05 ( digital color file set up, latex printer set up)

48" x 105" vinyl $142.63  print digital color 4/0 on white smooth vinyl (15oz)

48" x 105" canvas  $300.13  print digital color 4/0 on canvas

48" x 105" versa fabric  $273.88  print digital color 4/0 on versa fabric

53" x 116" vinyl  $174.63 print digital color 4/0 on white smooth vinyl (15oz)

53" x 116" canvas $368.13  print digital color 4/0 on canvas

53" x 116" versa fabric $335.88 please note: print cannot be any larger, printing on a 54" rolld

A second set of quotes from a different Southern California printing company for printing on vinyl (the type of material used for advertising banners):

48"x105" ,  white 64" Roland EcoSol Banner, solvent 6 color Roland 4sf  $230.80

53"x116",    white 64" Roland EcoSol Banner, solvent 6 color Roland 4sf  $258.78

56"x122.5",  white 64" Roland EcoSol Banner, solvent 6 color Roland 4sf  $277.42

(I might check on the AliBaba website to see what I can find for printing services in China.  Also, I’m checking on the possibility of printing on upholstery vinyl and marine vinyl).