Cyanight's Customizations

@LebaneseWarlord said in Need advice for custom dice DIY:

I’ve recently bought 96 dice because I wanted to make custom hit/miss dice for Global 40. I bought these dice from amazon and they’re plain blank and white dice.

I don’t have a lot of experience with DIY projects but I have access to a lot of good tools so I’m looking for advice regarding techniques on how to mark and repaint the dice I bought.

For the marking, I was thinking about using a rotary tool to carve a little dot.

The real challenge is the painting. I looked a lot on internet and I can’t seem to find a technique for painting on plastic that everyone agrees on, but here’s what I have so far.

Wash the dice to remove any grease that could be on the surface Use very fine sandpaper or some sort of abrasive to remove the protective finish that is on the dice right now and offer a better surface for the new paint to stick Wash the dice again the remove the dust from the paint removal Apply one or a few (I’m not sure about this one, I’ll read what is suggested on the can) of primer Apply a few thin layer of the color I want on the dice Paint a white dot in the carving I made earlier with a fine brush Apply one or a few (not sure about this one either, something will be suggested on the can) of clear finish to protect the paint

Any correction or suggestion would be very welcome!

Guys use RIT dye for color. Go to Siredblood’s custom dice you tube video. Shows how he used a jig to spot hole dice and then dye them

I plan on printing some out from Siredblood’s link.  I watched his video and you can certainly do it that way.  My only concern with adhesive backed “stickers” is that with all the handling of game pieces, I can imagine that the stickers begin to peel up after a while. If you’re going to use the adhesive backed stickers, might I recommend to apply thin CA glue around the outside edge of the sticker after you’ve burnished it down on the carrier deck.  You can get some thin CA at your local hobby shop where they sell RC planes, or just order it online.  Because it is literally as thin as water, you’ll need to apply it with some sort of makeshift precision applicator.  But after that, you won’t have to deal with annoying stickers that don’t want to stay down tight.

Also, if you use a glossy type sticker paper, after you’ve applied it and the carrier is “all done”, spray the entire piece with a light coat of Testor’s Dullcote spray laquer.  You’ll get rid of the sheen both on the plastic and from the glossy paper. All the colors will “blend” together and the piece will look much better.  :wink:

New Sets Arrived today.

Republican Spain/National Spain
Balken Crosses for Armor
Balken Crosses for Aircraft
UK Roundels for Aircraft

check em out.
combatminiatures.org

balken armor.jpg
German Aircraft Crosses.png

I just made my own bootleg Italians with Krylon “Classic Grey-” this was a $4 Walmart special.

Between my copies of AAR, AA42, AA41, and AA42.2, I was able to scrounge up more than enough ugly/unique sculpts to give those backward stepchildren of the Axis their own tantalizingly un-purchasable and 1942.2-ready complement of 3 BB (Axis BBs from 41), 5 CA (cut the masts off some small UK/RU BBs from AAR _, 6 TR (axis TR from 41), 8 art (japan AAR) and 4 Bmr (axis '41 bmrs). The rest of the forces are donated with love from AAR Germany, including the 88’s that finally get to serve their intended AAA purposes in the Italian army.

Pictures when I can._

This sticky thread has been replaced by… http://www.axisandallies.org/forums/index.php?topic=39633.0

You mean like this?

http://www.historicalboardgaming.com/Custom-Map-Operation-Barbarossa_p_683.html

After building my AA50 table and a portable wargaming table, I think I’m tabled out (and let’s face it, I just don’t have any more room for tables in my already cramped household) but I did love making them.

After painting my entire AA50th set + a Spring 1942 set of pieces, I’d be more than willing to do more if the need arose.

Right now I’m more into Wargaming terrain and miniatures though.  There’s enough there to keep me pretty busy!

@Tall:

Guys,

––Here is an “in-process” pic of one of the U.S. Navy APD Fast Transports. These are the famous
“Green Dragon’s” that were re-built from WW-1 ‘four-piper’ Destroyers into Fast Transports to assist the Marine Raiders in their endeavors. The paint scheme utilises “Allworkandnoclay’s” talent to the max. The units are from Shapeways and have had their depth-charge racks removed so as to have the 48-star U.S. Flag applied to their stern decks. More on these six ships as they progress. Enjoy!
––Unless I’m mistaken these are the first highly detailed, painted and decalled SHIPS that the
WarMachine has done so far.

Tall Paul Â

That is definitely a cool looking transport. :-D