Cyanight's Customizations

@The-Captain
I used 3mm thumb nuts drilled out to fit 3mm acrylic rods. I used a number of 3d printed jigs for cutting the rods, assembly of the stands and gluing the magnets. If I remember later I’ll attached some pictures of the jigs/stands

89942069_234023921058065_8338820971033001984_n.jpg !
88106161_221519072308550_2482507379309019136_n.jpg tn5.png

@Young:

Thanks CWO Marc, really appreciate your comments… do you play often? I understand there is a lot of players in Montreal, do you have a game group?

For many years I’ve had too much going on in my life, professionally and otherwise, to have had time to do much of anything other than collecting the A&A games.  And, to be honest, I have too many issues with many of the features of the various A&A games that I’ll probably never play anything other than what I’m hoping to create at some distant point in the future when I do have the time for it, which is a completely personalized version of the Global game that, for all intents and purposes, keeps the sculpts and the map board but throws out the entire rulebook and reconceptualizes the game from scratch.  And it’s not even fully correct to say “keeps the sculpts and the map board” either.  I’ll be expanding the number of nations and the number of unit types by making use of the very large pool of A&A sculpts I’ve acquired over the years, for instance the ones from the early-edition games and the ones from 1941 and 1914.  And as I’ve noted in the thread where I’ve posted pictures of my custom table, one of the first things I did to the Global 1940 map was to rework its “under-the-plexiglass” roundel allocations to better reflect the structure of the world as it existed prior to the invasion of Manchuria in 1931, as a starting point from which I can then modify the map (by placing roundels on top of the plexiglass) to represent any subsequent starting date from 1931 onward.  A related project that I worked on to create the infrastructure for this eventual new game was the Global 1940 map inventory, a copy of which I posted over here last September:

http://www.axisandallies.org/forums/index.php?topic=36590.0

But at this point I don’t have an actual plan for what this reconceptualization will look like.  Nor am I likely to do so until I have the time to work on this project solidly for months at a time…so this may have to wait until retirement (which isn’t for tomorrow by a long shot) before this idea translates into anything concrete.

Baron, here are the pics of both tables. G39 close and G40 in back with some of your mods. Process of remodeling.

image1.JPG

This will be the last pictures until the end of the year.

The US EUROPEAN FORCES will be the next set that graces my map, followed by the GERMANS, but it will be awhile before the Axis can get on the board.

I hope you have enjoyed the pictures.

Until next time.

Over and out! :-D

@Imperious:

You can’t teach this because the learning curve is high for Illustrator CS, You just have to do it and struggle and it may take 10 years to be really good. I do suggest NEVER USE PAINT SHOP PRO. Their is nothing “pro” about it. It will destroy your computer from day one. Also, to save a few hundred bucks, buy an educational version ( its the same) using a student ID, you can just join the school and not even register for classes, just to get the ID and buy the program in the student store–make sure they have it in stock first.

You could register for a night class in basic Photoshop and Illustrator which would get you that student ID card and an introduction to the software.

Regarding prices, here are some quotes that I got from two different Southern California print shops  (I had posted this also on the thread entitled Ambilzi & Grasshopper’s 1940 Global Map)

The first print shop provided the following estimates (note the $52 set up fee):

SET UP:  $52.05 ( digital color file set up, latex printer set up)

48" x 105" vinyl $142.63  print digital color 4/0 on white smooth vinyl (15oz)

48" x 105" canvas  $300.13  print digital color 4/0 on canvas

48" x 105" versa fabric  $273.88  print digital color 4/0 on versa fabric

53" x 116" vinyl  $174.63 print digital color 4/0 on white smooth vinyl (15oz)

53" x 116" canvas $368.13  print digital color 4/0 on canvas

53" x 116" versa fabric $335.88 please note: print cannot be any larger, printing on a 54" rolld

A second set of quotes from a different Southern California printing company for printing on vinyl (the type of material used for advertising banners):

48"x105" ,  white 64" Roland EcoSol Banner, solvent 6 color Roland 4sf  $230.80

53"x116",    white 64" Roland EcoSol Banner, solvent 6 color Roland 4sf  $258.78

56"x122.5",  white 64" Roland EcoSol Banner, solvent 6 color Roland 4sf  $277.42

(I might check on the AliBaba website to see what I can find for printing services in China.  Also, I’m checking on the possibility of printing on upholstery vinyl and marine vinyl).

@Tall:

Lucas,

––My friend,…I DO NOT want to hear from you for a month! Please go and take care of your important personal business. I wish you and your soon-to-be wife THE BEST!
––We’ll talk about paint jobs in a month (or so).

Here’s my best wishes to your future happiness.

“Tall Paul”

Haha… I will do my best on that front. Thanks again for the well wishes. I will keep the German aircraft safe at home for the time being.