Cyanight's Customizations

@The-Captain
I used 3mm thumb nuts drilled out to fit 3mm acrylic rods. I used a number of 3d printed jigs for cutting the rods, assembly of the stands and gluing the magnets. If I remember later I’ll attached some pictures of the jigs/stands

@manincellv awesome looking map!

@SS-GEN

Will do. Thanks

@bolasgod

Not sure if you triplea but “Global 40 House Rules” has a lot of options. Here’s a link to the “Redesign” thread which has a lot of the ideas:

https://www.axisandallies.org/forums/topic/26089/g40-redesign-currently-taking-suggestions/1609

Also oztea has some in his 42 mod here:

https://www.axisandallies.org/forums/topic/20575/oztea-s-1942-global-setup?page=1

I’m using Adobe Photoshop CS6.  The textures that I made for the neutrals are partially “from scratch” and partially “stitched together” (and color corrected) from other areas of the map.

Any customization is welcome on this thread.

Your other question would probably go in one or two places.

You can either ask your question on the thread, "other axis and allies variants, "  or the thread, "house rules, " which might be a better place for it.

That would be my guess, but others may have suggestions as well.

I hope that helps. :-)

John

Following up:

I went out and bought a can of chrome spray-paint from a Blick arts-and-crafts store, and did a few tests on some B-17’s…

I’ll post pictures if anyone wants to see them.  It looks great.  Nice, even coating… very lustrous.  With some added details I think my late-war aircraft are going to look amazing.

Thanks for the feedback, everyone.

jwo1984 and others,

––This thread shows the SHAPEWAY Capitals, Air, and Naval Bases that were designed by Ebard. Enjoy.

Tall Paul