Cyanight's Customizations

@The-Captain
I used 3mm thumb nuts drilled out to fit 3mm acrylic rods. I used a number of 3d printed jigs for cutting the rods, assembly of the stands and gluing the magnets. If I remember later I’ll attached some pictures of the jigs/stands

@LebaneseWarlord said in Need advice for custom dice DIY:

I’ve recently bought 96 dice because I wanted to make custom hit/miss dice for Global 40. I bought these dice from amazon and they’re plain blank and white dice.

I don’t have a lot of experience with DIY projects but I have access to a lot of good tools so I’m looking for advice regarding techniques on how to mark and repaint the dice I bought.

For the marking, I was thinking about using a rotary tool to carve a little dot.

The real challenge is the painting. I looked a lot on internet and I can’t seem to find a technique for painting on plastic that everyone agrees on, but here’s what I have so far.

Wash the dice to remove any grease that could be on the surface Use very fine sandpaper or some sort of abrasive to remove the protective finish that is on the dice right now and offer a better surface for the new paint to stick Wash the dice again the remove the dust from the paint removal Apply one or a few (I’m not sure about this one, I’ll read what is suggested on the can) of primer Apply a few thin layer of the color I want on the dice Paint a white dot in the carving I made earlier with a fine brush Apply one or a few (not sure about this one either, something will be suggested on the can) of clear finish to protect the paint

Any correction or suggestion would be very welcome!

Guys use RIT dye for color. Go to Siredblood’s custom dice you tube video. Shows how he used a jig to spot hole dice and then dye them

@Quirky-Turtle At least you have an ocean as an excuse. Here it just a truck ride north…

I just made my own bootleg Italians with Krylon “Classic Grey-” this was a $4 Walmart special.

Between my copies of AAR, AA42, AA41, and AA42.2, I was able to scrounge up more than enough ugly/unique sculpts to give those backward stepchildren of the Axis their own tantalizingly un-purchasable and 1942.2-ready complement of 3 BB (Axis BBs from 41), 5 CA (cut the masts off some small UK/RU BBs from AAR _, 6 TR (axis TR from 41), 8 art (japan AAR) and 4 Bmr (axis '41 bmrs). The rest of the forces are donated with love from AAR Germany, including the 88’s that finally get to serve their intended AAA purposes in the Italian army.

Pictures when I can._

I couldnt find your pieces on iwngu. How did the final ones come out? Im interested in getting a set of naval and air facilities if its doable.

@jwo1984:

Yeah that’s understandable. I’m the same too with the bulk of pieces already painted it really takes a new HBG expansion set to get my brushes out again. Or right now my buddy and I are trying out Guadalcanal for the first time. And I noticed the US start out with a generous amount of b17 fortresses so I wanted to repaint some for the game. Well whenever you get inspired again I will look forward to more showcases from you.

I hope I can get to it… maybe after a few things clear out of my schedule in the coming weeks. I always feel the need to paint when I see the cool stuff you guys are working on.

The next group of infantry, will be, DESERT LIGHT INFANTYRY.

Until next time.

Cheers!

John

jwo1984 & Others,

––This thread shows how the Shipyard was made by Ebard re-designing his Dry Dock, adding a large wharf area, adding a second crane, several warehouses, storerooms, and supplies to the dock area including some pics of the finished painted units. Enjoy, and ask any other questions you might have.
––It Also shows his Small Naval Base and Air Base (straight) units.

Tall Paul