Cyanight's Customizations

To fit the entire G40 game pieces, you will need 2 boxes and that will include space for alot of HBG printed pieces, etc including roundels, etc

Thank you for the information @vodot . Yes the AAA infantry pieces would be hard to print.
Looking at an 3D printer like the ANYCUBIC Photon S 3D Printer, UV LCD Resin Printer with Dual Z-axis Linear Rail and Upgraded UV Module & Print Quietly and Off-line Printing, Build Size 4.53"(L) x 2.56"(W) x 6.49"(H).

https://www.amazon.com/ANYCUBIC-Photon-Upgraded-Off-line-Printing/dp/B07RY6NSL8/ref=sr_1_7?keywords=3d+sla+printer&qid=1576351692&sr=8-7

I think this one will do well with most AAA pieces.

All, I’ve finally gotten a 3D printer of my own, so I have been able to launch my own little Etsy shop with the mission of getting these models out there as affordably as possible! Huzzah!

While my shapeways store will stay open, doing self-fulfilled prints on Etsy is going to be a win-win; much more of the proceeds going directly to creators, which brings the price down for everyone. The only con is that I will have to maintain the 3D printer and do all of my own post-processing…

Anyway, I wanted to welcome everyone here to the shop with a 10% off coupon for the rest of 2021! Just use coupon code AADOTORG21 at checkout. Come be one of my first customers! Visit my etsy shop here: https://www.etsy.com/shop/NathanDetr0itDesigns

I’ll be adding new things and ideas constantly - including bundling items up for complete kits ala G40 etc., so please DM me or respond below and let me know what else you would like to see!

Thank you for the positive feedback! I forgot to say that in the previous post, and it’s very important that I do. It’s very encouraging and motivating to get good feedback, and we certainly appreciate it. The above mentioned four Essex class carriers are complete, a long with several other ships of the US Navy, so its time to update the thread. Just ships by FOlewnik in this post. More aircraft are almost done but I haven’t put magnets in them yet (so not really done), so no aircraft pictures this post.

We’ll start with the two “odd men out” of the HBG sculpt Baltimore Class Heavy Cruisers. Why “odd men out”? Because in the below picture we have on the left, the USS Unnamed Baltimore Class Cruiser Wearing Measure 31a, Design 9C, and on the right is the USS Columbus (CA 74), which wasn’t commissioned until June 8, 1945. The cruiser with the long name is wearing a design that was never used, but was taken from a period design found at https://www.wikiwand.com/en/World_War_II_US_Navy_dazzle_camouflage_measures_31,_32_and_33:_cruisers. The USS Columbus is wearing a Measure 12 Modified designed by FOlewnik to match the pieces we’ll be using for the US Atlantic fleet. These will get aircraft added, but at the time of the photographs the decals on the wings of the aircraft were drying.
DSC_0510a.jpg
DSC_0511a.jpg
DSC_0512a.jpg
Pattern_sheet,_MS-31a_9C_for_Baltimore_class.jpg

Next up are some metal destroyers from GHQ. Below on the left, the very brave USS Johnston (DD-557) painted in MS-3_/6D as it looked when it was “Sunk by Japanese Warships off Samar October 25 1944,” and next to it is USS Van Valkenburgh (DD-656) painted in camouflage Measure 31, Design 9d. All Wartime photos taken from Navsource.org, a great resource for US Navy history buffs.
DSC_0514a.jpg
DSC_0515a.jpg
DSC_0516a.jpg

Below, the real USS Johnston shortly before her final battle, and the official design sheet:
DSC_0516a0555715.jpg
Pattern_sheet,_MS-31-32-33_6D_for_Fletcher_class.jpg

A great wartime picture of the USS Van Valkenburgh, which is the same on both sides:
DSC_0516a0565603.jpg

Now on to these two. From GHQ, USS The Sullivans (DD-537) painted in Measure 1, and the HBG sculpt light cruiser USS Marblehead (CL-12) who always wore Measure 2 throughout the war. If I can get FOlewnik to put the Shamrock on the first stack of The Sullivans when he puts the scout aircraft on the Marblehead, as seen in the below wartime photograph, I’ll come back and edit the post.
DSC_0520a.jpg
DSC_0522a.jpg
DSC_0519a.jpg
DSC_0520a0553740.jpg
DSC_0520a0401208.jpg

The post previous to this post showed four Essex Class sculpts from HBG getting prepped and started with a base coat. Those are now completed and I had too much fun playing with them and the aircraft (that are complete so far) while I was taking photographs. I’m pretty sure I didn’t make any wooshing sea or aircraft noises or FOlewnik would have laughed at me. I was tempted though, and here’s why:
DSC_0524a.jpg
DSC_0525a.jpg
DSC_0526a.jpg
Above we have the first of the Long Hull Essex Class, USS Ticonderoga (CV-14) on the left looking as she did after her April 1945 refit from suffering a Kamikaze Attack on January 21, 1945, and USS Bunker Hill (CV-17) on the right. The Bunker Hill is wearing Measure 33, Design 6A, of which Navsource says, “Her port side camouflage pattern was the most intricate design applied to any carrier.” One glance can confirm that!
DSC_0526a021772.jpg

The final two Essex Class carriers are the USS Essex (CV-9) herself, and the USS Bennington (CV-20). The Essex is wearing a unique pattern, Measure 32v6, Design 10D, adapted from a destroyer pattern specifically for the long hulled Essex. The Bennington is painted in Measure 32, Design 17A.
DSC_0527a.jpg
DSC_0528a.jpg
DSC_0529a.jpg
DSC_0529aPattern_sheet,_MS_32a_17A_for_Essex_class.jpg
DSC_0529aUSS_Essex_(CV-9)_in_MS_32_6-10D_camouflage.jpg

Finally, some group pictures just for fun:
DSC_0531a.jpg
DSC_0532a.jpg
DSC_0533a.jpg
DSC_0534a.jpg
Thank you for checking out the post! If you liked it, please click the little heart. I’m trying to figure out why our post is only rated with a 2 when it seems it should be a bit higher if the other likes are any indication.

Appreciate the comments. You must have been busy the last few days. Haven’t seen any of your work.

Are you and your friend painting anything, this week?

Thanks you for the reply! E-mail sent to Chessex - looking forward to getting these.

@jluna1273:

Toblerone77,

Question for you: how did you get the “CUSTOMIZER” tab on your profile?

Marc has your answer pretty much there. The link kind of shows why, what, when ,where and who made this happen.

There are people here a lot better than me on a lot of subjects involving customization and HRs/game ideas, and I was surprised I even received it.

“Customizer” covers a lot and I’m sure in time others will be awarded this badge. For myself I nominated a few who really showed they were doing a lot for the game. Most notably “Most Holy” and “alllworkandnoclay” they both paint and Most Holy is the host of Dicestruction podcast. This to my knowledge is the only podcast which features Axis & Allies exclusively. These guys were just a couple whom I nominated. I asked a few people to move allworkandnoclay’s thread to customizations to help all those who paint and customize their units as a tool.

The credit for much of this goes to YoungGrasshopper who suggested the badge for Der Kuenstler initially, whom I also nominated for his war room and his HR work.

@Tall:

Lucas,

––My friend,…I DO NOT want to hear from you for a month! Please go and take care of your important personal business. I wish you and your soon-to-be wife THE BEST!
––We’ll talk about paint jobs in a month (or so).

Here’s my best wishes to your future happiness.

“Tall Paul”

Haha… I will do my best on that front. Thanks again for the well wishes. I will keep the German aircraft safe at home for the time being.