More painted pieces for consideration

Ah, yet another good use for the coasters!

I was awarded the Customizer badge at some point unknown, but marked on my pictures post as to when I found out I was a recipient. There is a post somewhere on the forums that tells of the process and from what I recall one has to be nominated by someone to a moderator and there is some sort of review process. Here’s a link to the award discussion thread: https://www.axisandallies.org/forums/topic/24173/customizers-round-2

Glad you enjoy the pics and tips! We all inspire each other with our pictures, tips, and techniques, so keep sharing!

Part 4: Starting the ships, adding decals to the tanks, skin tones on the soldiers

Today spent some time adding paint to the sprayed ships, including painting the water jettisons on the subs black (this was very tricky and ended up looking a little sloppy). Advice for painting the jettisons: toothpicks are not small enough! If you do use toothpicks, you’ll have to dab a dot of black for each tiny jettison.

The battleships were a bit easier, and painting the decks, bridge, and smoke stacks were all done in silver. I plan on adding the final grey coat last after the deck and stacks/bridge dry. I experimented with how to add the national emblem, and will probably opt for a white background with a red dot on the bow of the ship. In the future I may do that with the rear end of the ship.

I painted the tranny smoke stacks silver and added a white background for the emblem on the destroyers. All in all, the Japanese navy is coming along nicely.

The armor is pretty much done. I added a white flag to the front side of the armor and will be adding the red dots later. For the aircraft, I’ll be adding a red band around the rear part of the plane. I was debating between sky blue and red and may alternate just for some variety.

The soldiers got some skin! And I just want to say that adding the paint alone brings out the contours of their facial features in an excellent manner on their own. I may add a touch of black to certain areas of the face but that will be a last step. The next step will be panting their uniforms, rifles, and helmets.

After all this is done, I will be spray painting the japanese bombers white, the aircraft carrier black, and then will add the details to those. The Japanese are about 55% done all in all and I’m pleased with the results so far even if they do look a bit amateurish. Stay tuned.

IMG_6405.JPG IMG_6404.JPG IMG_6403.JPG IMG_6402.JPG

@AlphaKappa:

That is so helpful!  Thank you for the analysis!

It was my pleasure. A chance to pull out my games and admire them? If I must…  :-D

@AlphaKappa:

It’s too bad Avalon Hill didn’t print the new Anniversary Edition in the same colors as Europe '40 Second Edition.  I really like the lighter shade of those Italian pieces because they’re easier to distinguish from Soviet red-brown.

To be fair to Hasbro/WotC/Avalon Hill, all they promised was a re-print. And to a large degree, that is what the New A&A Anniversary edition was: a straight up re-print of the original go at things. Were there differences between the two prints? Of course there were. Were all of those changes for the better? I don’t think so, no. I especially wish they had kept the US F6F Hellcat fighters but instead we got more P-38 Lightnings. But overall, it was probably as faithful as they could do and a long shot better than either 1) not doing it at all (what a pity that would have been) or 2) just phoning it in and wholesale dumping all of the right pieces from A&A 42 and A&A Europe 40.1 Italy.

Instead, we got the original Anniversary Edition Italian tank, the M14/41. We got the Italian brown Japanese Betty bombers and Type 92 Howitzers (artillery). And they put them into a shade about as close as to the shade of the original Anniversary Edition Italians as they were going to get from two print runs separated by 9 years. And that meant that we got a bunch of Italian brown German ships and fighters. But we got a re-print of a game I didn’t think was ever coming back.

And for that, I don’t mind dark brown Italians. Even if I would have rather gotten the F6Fs and the Maroon UK Country class cruisers, I’m happy with what we did get.

-Midnight_Reaper

I have seen lots of people here use acrylics and I have on occasion. Most of my paints are enamels though. I find that is stays wet longer (which is a good thing) and doesn’t clump up nearly as much on your brush. I also use enamels in my airbrush. I find that enamels are actually much easier to clean than acrylics. While acrylics are water soluble, they don’t just dissolve, especially if already dry. It involves a great deal of scrubbing and scraping. With enamels, all you need is some mineral spirits cleaner and it takes the paint right off with very little effort. Cleaning acrylic paint out of my airbrush was hell the first time I did it… never using acrylics in there again. In terms of the finish, I can only assume that enamels hold up better to bumps and scrapes than acrylic paint does.

Someone once asked if enamels, by default, have a glossy finish to them. They do not, as long as you are using flat enamels, which seem to be the standard. I use flats and they have an excellent, non-shiny finish. I feel like enamel colors are a little deeper too, on the whole, but I suppose it depends on the brand of acrylic you use. Vallejo seems to be a popular choice for acrylics. I use predominantly Model Masters (Testors) enamels. In general, I would just said to find a brand you like to work with and produces the results you like. Don’t buy super cheap paint… you will get the results you pay for.

Good luck!

@mentok27:

Man now I wish I had some new stuff to share. But I didn’t finish any pieces  I started recently…. I did do quite a few Hungarian pieces but I was waiting till I did the Air Force as wel before I snapped a pic.

I lost a lot of time recently on the battlefield 1 beta.

No problem, you have inspired me to get back to painting. Due to health reasons, I haven’t done anything in a year, but I’m about to least, do some small jobs, here and there.

Can’t wait to see your Hungarian pieces. :-)

Cheers,

John

I can see wizards of the coast having a blanket statement rejecting all requests to modify material, after all… they probaly deal with it alot with their D&D department than with Avilon Hill products.

@dangermouse650:

@John:

@dangermouse650:

Great work John

Thanks DM.

Where have you been?

Have you been working, as of late?

Yes, work has been very hectic and other life happenings that are keeping me too busy to paint……but keep up with yours your doing great. :-)

Appreciate it DM. I hope you get to paint soon. :-)

John

@AlphaKappa:

How does their height compare to the OOB infantry pieces?  The pictures on HBG’s website make them look pretty tall, but without seeing them side-by-side, it’s hard to tell.

Can anyone offer any insight, or maybe even post a picture (if you’re feeling generous with your time)?  Any advice would be appreciated!   Thanks.

Note that the OOB infantry sculpts aren’t all the same height; they vary from nation to nation, as you can see from some of the pictures I posted here:

http://www.axisandallies.org/forums/index.php?topic=30440.0