More painted pieces for consideration

I have had a 3D printer hobbyist CAD design a new BB playing piece and a new DD playing piece.
The BB is based on the WW1 UK Iron Duke modified for appearance. It is, certainly, better looking than the original BB design. Additionally, I (we) used a depiction of a WW1 US 4 stacker DD to make a modified DD playing piece for A&A WW1. The rationale that the Sub replaces the need for a DD just doesn’t ‘cut it’ (make sense). Most of the colour filaments used to 3D print these units are a good match to the original playing piece colours. I will post pictures of these as I have assistance doing so.

i just started painting mine.  Use spray paint.  Use Krylon grey or white primer.  After it primed spray it with the color you want as the base gray, green, earth, etc.  Then add the finishing touches the cockpit, nose, tail colors, etc.  The spray paint gives you a nice even coat.  Go light and fast over the piece about 6 inches away .  if you go slow you’ll put on to much paint.  no good you lose detail.  If you really want a sharp looking piece add decals.

look at some of my pieces on combat miniatures face book site.

Jeff Cam.

I visit that website a lot. They have a lot of cool stuff and I check it once a month hoping France gets French units.

I’ve always had a problem with HBG’s “orange” Japanese units not being of the same tone of orange from OOB A&A… most other colors of custom HBG units seem to match pretty good, but that orange always seemed off to me… so much so I’ve never kept a custom HBG Japanese unit in my nation bins… sad, cuz I really like some of them.

(and yes, I’m one of those anal-retentive guys where if the color is just off a tad, it “ruins” it for me… I know I’m odd that way).

P.S.
Dang, I just realized this forum won’t let you use the first three letters of Japanese units without blanking it out as a profanity.

@AlphaKappa:

I’ve been looking for a control tower for air bases.  Good luck with your molds!  Hope that comes out well.

Thanks! Ill be sure to post them, as well as offer them if anyone would be interested. I moved here (CA) from WA awhile back, I knew where to get all that casting stuff, ive looked here, cant seem to find anywhere locally… ordering online is murder, shipping jugs of liquid… in addition, not sure what im getting. I may end up using fiberglass resin, something this small, should be fine… just takes long to cure and I gotta make a grip, unlike the casting resins, takes like 30 seconds.

When I painted my units, I had issues with Britain, I originally made 2 schemes, then decided I only wanted the tan, not green… On my painting, I used a combo of lacquer Enamel and acrylic, it was at the enamel stage, but I soaked them in paint thinner (in all preparation to consider them toast and order new units)… but they came clean, they soaked for 10 min or so, and I used my tooth brush (yes mine lol, bristle’s turned green, and yes, I still use it, the green faded away HAHA) to scrub away the paint film.

Wow!  Such cool pieces! (Been awhile Paul)  And there’s others I’ve yet to see that are posted -

Thanks