VIDEO: Grasshopper's G40 Custom Table

I have been playing around with different configurations for a custom table and wanted to note some things I’ve landed on that I really like. A main one thing is having the map mounted so that it can slide around as needed on top of a bigger playing area. My table is 65” x 95” in total with a 5.5” arm rest around the outside and the middle is a recessed neoprene surface. I have the OOB Global map mounted on 1/2” rigid foam with a 1/2” aluminum frame around it. This allows the map to slide up close to whoever’s turn it is, but then be in the middle so both players can roll dice In front of them without disturbing the map and in easy view of the other player. (Plus we like lots of room to roll the bones). This ability to adjust the surface along with a standing height, makes it comfortable for long uses because you can move around more and don’t feel as tied down.
Things I’ve learned and changed from original design - I originally used too big of a frame for the map and mounted it on too high of a foam block (you can see these pictures at the bottom) - it made it hard to see the other player’s dice and the big frame took up too much real estate. My global map is mounted on much thinner foam (the framing is bad, you can see if you look closely) but I also used much thinner aluminum angle for the frame. This gives just enough grip when needing to move the map around (I use furniture slides on the bottom, which glide very nicely on the neoprene) but doesn’t make the whole thing too bulky. Having it an inch or so off the surface keeps the dice off, but isn’t so heigh that you can’t see the other player’s dice rolls. When playing other versions (such as Zombies) the board is much smaller, but it can easily swap in and out on the same table since it can move around where ever it is needed or be pushed aside.
I originally made it normal table height, but found long reaches while sitting were harder and it just felt cramped. Standing height with a bar stool is a great way to have the best of both worlds.
The 5.5” rim around the table itself gives you a nice arm rest that doesn’t interfere with the gaming surface. I’m playing with how to best add some cushion to this part - open to suggestions. Sometimes I just lay a piece of leftover neoprene on it.
Dice bounce nice on the neoprene and stay off the floor. It also feels nice and has enough give to allow things to slide but be picked up easily. Wouldn’t definitely go with neoprene again as a surface covering.
I made the drawers open to the inside of the table so you can stay hunched over the action while accessing and stowing stuff away. 50/50 on whether I would keep this if I were to do it again. If I were doing it again, I might try to build customer drawers form scratch using actual drawer glides, but that was beyond my ability when I first did this, so I just used clear plexiglass boxes with aluminum pulls mounted on them. It’s nice having them clear, and I was happy with how the pulls came out, but without glides they can be a little fussy sliding in and out of their slots.
I originally designed the table so that I could put a cover surface back on top when not in use, but find I don’t really ever do that, so if I were to do it again, I might not mess with that part (I never even finished staining those as you can see in the pictures).
CF362D52-269F-4480-8CBB-08139099138F.jpeg A9E12EA1-66EB-4671-86AC-68C62FD30AD5.jpeg 858DE1F2-030A-4D5A-93E4-70A7D1180ADB.jpeg 8F513EE0-DA37-4BA9-880E-4D5EF7BF431F.jpeg F0188165-757B-4CC1-BF67-5045832283C9.jpeg 2E3CD627-0D31-4121-ACF8-682F9F58A40B.jpeg

Part 4: Starting the ships, adding decals to the tanks, skin tones on the soldiers

Today spent some time adding paint to the sprayed ships, including painting the water jettisons on the subs black (this was very tricky and ended up looking a little sloppy). Advice for painting the jettisons: toothpicks are not small enough! If you do use toothpicks, you’ll have to dab a dot of black for each tiny jettison.

The battleships were a bit easier, and painting the decks, bridge, and smoke stacks were all done in silver. I plan on adding the final grey coat last after the deck and stacks/bridge dry. I experimented with how to add the national emblem, and will probably opt for a white background with a red dot on the bow of the ship. In the future I may do that with the rear end of the ship.

I painted the tranny smoke stacks silver and added a white background for the emblem on the destroyers. All in all, the Japanese navy is coming along nicely.

The armor is pretty much done. I added a white flag to the front side of the armor and will be adding the red dots later. For the aircraft, I’ll be adding a red band around the rear part of the plane. I was debating between sky blue and red and may alternate just for some variety.

The soldiers got some skin! And I just want to say that adding the paint alone brings out the contours of their facial features in an excellent manner on their own. I may add a touch of black to certain areas of the face but that will be a last step. The next step will be panting their uniforms, rifles, and helmets.

After all this is done, I will be spray painting the japanese bombers white, the aircraft carrier black, and then will add the details to those. The Japanese are about 55% done all in all and I’m pleased with the results so far even if they do look a bit amateurish. Stay tuned.

IMG_6405.JPG IMG_6404.JPG IMG_6403.JPG IMG_6402.JPG

@fasthard thanks for sharing! Interesting idea to use 2 euro cent coins.

Thanks Dauvio. I appreciate it.

Nice work!!

I’ve always had a problem with HBG’s “orange” Japanese units not being of the same tone of orange from OOB A&A… most other colors of custom HBG units seem to match pretty good, but that orange always seemed off to me… so much so I’ve never kept a custom HBG Japanese unit in my nation bins… sad, cuz I really like some of them.

(and yes, I’m one of those anal-retentive guys where if the color is just off a tad, it “ruins” it for me… I know I’m odd that way).

P.S.
Dang, I just realized this forum won’t let you use the first three letters of Japanese units without blanking it out as a profanity.

If you are really looking for a good finish on all your HBG pieces, you could buy a couple small cans of differing lacquers and test each one. $20 should get almost 3 cans worth. It may be a waste to some degree, but at least you can know for sure which one works best.

I have a flat Testors lacquer/sealant spray that I used on Tall Paul’s finished pieces. Granted, these were painted first, so the effect may be thrown off. However, I will say that I did not observe any level of gloss on the HBG or OOB pieces after I applied it. It was quite flat as advertised. FWIW.

I have them formatted to avery .75 round labels. see house rules ( pieces and where to get them)