HBG Global 1939 in-Game Pieces

@hopper1999 I’ve access to both resin and PLA printers, and while resin has a couple of extra steps compared to PLA, I wouldn’t consider it painful. I’ve come to appreciate resin’s ability to show detail even in very small scale. For me its worth the extra steps to clean and cure, for those results. What’s great is there are so many free units available, with some simple editing/converting you can quickly build cool armies.
As for casting, while I haven’t casted any A&A parts yet (still building my unit library), I have casted a lot of 3.75 action figure parts. I’ve gotten best results using a syringe and pressure pot. (I converted a old paint pressure tank). You inject your mold, and then put it under pressure, I’d do around 30psi, to help the resin into the thinner parts of the mold and prevent bubbles. It also helps, when making your mold to put it under pressure as well. I’ve found it helps prevents bubbles in the silicone and between the silicone and the part being cast.
I plan on using casting to duplicate units I already have, that I can’t find stl files for.

PLEAASE TELL ME THERE IS A PDF FOR THIS FILE???

@wimo08:

HBG latest newsletter said it’s delayed.Â

Thanks for the update.

If you are really looking for a good finish on all your HBG pieces, you could buy a couple small cans of differing lacquers and test each one. $20 should get almost 3 cans worth. It may be a waste to some degree, but at least you can know for sure which one works best.

I have a flat Testors lacquer/sealant spray that I used on Tall Paul’s finished pieces. Granted, these were painted first, so the effect may be thrown off. However, I will say that I did not observe any level of gloss on the HBG or OOB pieces after I applied it. It was quite flat as advertised. FWIW.

The best approach I’ve seen was a friend who cut his factories in half with a hacksaw. Large factories are majors, while the smaller, halved factories are minors.

I’ve got mine painted three different colors. Bought a lot of 50 for a few dollars from a vendor at Nashcon in May 2016.

Before Nashcon, I used red Monopoly hotels for the major factories and the green hotels for minor factories. I still like to use the green ones every now and again because I think they’re nifty.

Just looked over your thread again spitfire. Saw you 190’s very cool effect they do look like they may have been supporting some of rommels Afrika core in The desert! Ever thought of showcasing some of your other units spitfire? Maybe more of your air? I would love to see more of your renditons of airpower for the nations! Lhoffman has some great air he painted with just about every air unit type painted for the Germans in dark green schemes.

Thanks  :-) that worked a treat. My planes are now all airworthy!

I’m remembering the days when Table Tactics was the top of the line expansion for Axis and Allies. When '14 was announced i went crazy trying to find the WW1 pieces. I’m still looking.