HBG Global 1939 in-Game Pieces

@Imperious-Leader

Suspended from Reddit, but probably Germany grey, Italy yellow.

@hopper1999 I’ve access to both resin and PLA printers, and while resin has a couple of extra steps compared to PLA, I wouldn’t consider it painful. I’ve come to appreciate resin’s ability to show detail even in very small scale. For me its worth the extra steps to clean and cure, for those results. What’s great is there are so many free units available, with some simple editing/converting you can quickly build cool armies.
As for casting, while I haven’t casted any A&A parts yet (still building my unit library), I have casted a lot of 3.75 action figure parts. I’ve gotten best results using a syringe and pressure pot. (I converted a old paint pressure tank). You inject your mold, and then put it under pressure, I’d do around 30psi, to help the resin into the thinner parts of the mold and prevent bubbles. It also helps, when making your mold to put it under pressure as well. I’ve found it helps prevents bubbles in the silicone and between the silicone and the part being cast.
I plan on using casting to duplicate units I already have, that I can’t find stl files for.

@fieldcommander The only issue with the larger map 5x10 are the reach ranges. So if leave some space around the edges for pieces and such you might have a hard time reaching the middle of the board, like the all important Mediterranean, especially if you have short arms like me!

Sweet !!!

@CWO:

Thanks Cyanight and John – glad you find the identification charts useful.  For an actual history of the evolution of the sculpts, I highly recommend knp7765’s photographic inventory, located here…

http://www.axisandallies.org/forums/index.php?topic=23386.0

…because my I.D. charts approach the subject from a different angle: in almost every case, they simply show one representative sculpt for each nationally-distinctive design produced to depict each unit type that has appeared in A&A over the years.  The charts mostly ignore the many variations (some minor and some major) that have been seen in the sculpts – for example, the two versions of the Japanese field artillery piece, which was produced with the undercarriage either folded for towing or deployed for firing.  The only exceptions I made were for the Panther tank, the 88mm AAA gun and the Stuka dive-bomber (interestingly, all three being German units) because of the peculiar evolution of those three units over the course of A&A’s production history (especially in the case of the gun and the plane, which started out as completely different – and incorrectly-used – units compared to their current status).

Thanks again Marc, I had forgotten about his thread. this will be very helpful as well. :-)

john

This will be the last pictures until the end of the year.

The US EUROPEAN FORCES will be the next set that graces my map, followed by the GERMANS, but it will be awhile before the Axis can get on the board.

I hope you have enjoyed the pictures.

Until next time.

Over and out! :-D

@BJCard:

@Swedo:

Thank you, im not happy with the US star, i hate doing stars, they always look crooked. Tobad my russian carriers will probably never see action :(

You could just houserule a Russian carrier starting in the Baltic- hey, it is your house, your rules!

Awesome!