HBG Global 1939 in-Game Pieces

Thank you for the information @vodot . Yes the AAA infantry pieces would be hard to print.
Looking at an 3D printer like the ANYCUBIC Photon S 3D Printer, UV LCD Resin Printer with Dual Z-axis Linear Rail and Upgraded UV Module & Print Quietly and Off-line Printing, Build Size 4.53"(L) x 2.56"(W) x 6.49"(H).

https://www.amazon.com/ANYCUBIC-Photon-Upgraded-Off-line-Printing/dp/B07RY6NSL8/ref=sr_1_7?keywords=3d+sla+printer&qid=1576351692&sr=8-7

I think this one will do well with most AAA pieces.

“The War Game” and others address this by letting you buy all the units for every team, with different costs. So China pays 8 for tanks, Most powers pay 6, Germany 5 etc. This makes things more complex, but also more flexible.

Thanks for all the responses, folks - exactly what I needed to hear.

I think they would stack well in the box as long as you remove the cardboard boxes.

Excellent work!  I love how it folds up so easily.

I’ve gotten several private messages and some responses in this thread… so just as a head’s up and a community service…

Because of the private messages, I have ALREADY made a deal to unload my custom units, and they are, in-fact, already mailed off.

I know its kinda pointless now, but if you’re still that curious as to what I did have, here’s the complete list of the custom HBG units I had purchased in the last few weeks to beef up my bins… since I later made a decision to pull them and not use them, I did eventually re-order equivalent numbers of default/original OOB A&A units from HBG to beef up my numbers (like if I didn’t like the two HBG Japanese Fuso battleships, I reordered two OOB Kongo or Yamato battleships to replace them… so-on and so-on.  Anyways, here’s the (now kinda pointless) list:

(BTW: you may notice that for the most part, planes are missing from this list… I found most custom HBG aircraft to be good enough and scaled well enough to survive my “off-scale axe”.  So there are many HBG planes like P-47s and F4F/Hellcats that survived the cut and made it into my permanent bins)

HBG Battle Pieces (custom units)

US - Olive Drab:
5x Pershing Tanks
5x M5 Stuart tanks
15x M4A3 Sherman tanks
5x P-51 fighters

5x Essex CVs
5x South Dakota BBs
2x Nevada BBs
5x Baltimore CAs

UK - Tan:
10x Churchill Tanks
10x Valentine Tanks

5x Ark Royal CVs
3x King George V BBs

Russia - Brown
2x KV-2 tanks
11x T-34 tanks
4x T-26 tanks

German - Black
2x Schleswig Holstein BBs
2x Seydlitz CVs
8x Pz-III tanks

Japan - Pumpkin Orange:
10x Type 97 tanks
5x Ki-43 fighters
2x G8N Rita bombers

2x Kaga CVs
2x Ryujo CVs
5x Nagato BBs
2x Fuso BBs
5x Mogami cruisers
5x I-400 subs

MyHBGrejects.jpg

If you are really looking for a good finish on all your HBG pieces, you could buy a couple small cans of differing lacquers and test each one. $20 should get almost 3 cans worth. It may be a waste to some degree, but at least you can know for sure which one works best.

I have a flat Testors lacquer/sealant spray that I used on Tall Paul’s finished pieces. Granted, these were painted first, so the effect may be thrown off. However, I will say that I did not observe any level of gloss on the HBG or OOB pieces after I applied it. It was quite flat as advertised. FWIW.

@CWO:

@ozimek1:

You could have painted at the borders, IPC values, territory names etc. on the glass. That way you could easily use the 3D map for different games by changing the glass overlay :)

I think that having different sheets of painted glass for different games would be an expensive proposition.  I don’t know how much Rorschach’s setup cost him, but the acrylic sheet which covers my own AA50 table set me back over a hundred bucks.

Yeah, I originally was going to etch all the borders onto the acrylic, but when you’re looking at $50 (give or take) per sheet for this size it would be far too expensive.  But, to be honest, the sheet is so close to the table anyway there is absolutely no mistaking the territories, so it’s all good.

And this way, if we want to play a different game, we just pop in a flat MDF panel underneath instead of the AA50 board and you’re good to go!

The entire table (not counting countless hours of time) cost me about $150 … still no legs on it though.

And, Jeremy and I finally finished our game.  17 rounds, 9 weeks (about an hour and a quarter, hour and a half a week) … Allied Victory when the Brits waltzed into a sparsely defended Berlin.