Chrome paint on B-17's for that unpainted-aluminum look?

@leebear

That’ll do it - and after you have used your playing pieces for a while, you’ll see if you need to spray a new layer of matt varnish.

2-3 layers - each layer thinly sprayed - and dry 24 hours between each layer.

You units will last a lifetime:+1:

Thanks, Guys! I will try these Ideas out.

Thank you for the positive feedback! I forgot to say that in the previous post, and it’s very important that I do. It’s very encouraging and motivating to get good feedback, and we certainly appreciate it. The above mentioned four Essex class carriers are complete, a long with several other ships of the US Navy, so its time to update the thread. Just ships by FOlewnik in this post. More aircraft are almost done but I haven’t put magnets in them yet (so not really done), so no aircraft pictures this post.

We’ll start with the two “odd men out” of the HBG sculpt Baltimore Class Heavy Cruisers. Why “odd men out”? Because in the below picture we have on the left, the USS Unnamed Baltimore Class Cruiser Wearing Measure 31a, Design 9C, and on the right is the USS Columbus (CA 74), which wasn’t commissioned until June 8, 1945. The cruiser with the long name is wearing a design that was never used, but was taken from a period design found at https://www.wikiwand.com/en/World_War_II_US_Navy_dazzle_camouflage_measures_31,_32_and_33:_cruisers. The USS Columbus is wearing a Measure 12 Modified designed by FOlewnik to match the pieces we’ll be using for the US Atlantic fleet. These will get aircraft added, but at the time of the photographs the decals on the wings of the aircraft were drying.
DSC_0510a.jpg
DSC_0511a.jpg
DSC_0512a.jpg
Pattern_sheet,_MS-31a_9C_for_Baltimore_class.jpg

Next up are some metal destroyers from GHQ. Below on the left, the very brave USS Johnston (DD-557) painted in MS-3_/6D as it looked when it was “Sunk by Japanese Warships off Samar October 25 1944,” and next to it is USS Van Valkenburgh (DD-656) painted in camouflage Measure 31, Design 9d. All Wartime photos taken from Navsource.org, a great resource for US Navy history buffs.
DSC_0514a.jpg
DSC_0515a.jpg
DSC_0516a.jpg

Below, the real USS Johnston shortly before her final battle, and the official design sheet:
DSC_0516a0555715.jpg
Pattern_sheet,_MS-31-32-33_6D_for_Fletcher_class.jpg

A great wartime picture of the USS Van Valkenburgh, which is the same on both sides:
DSC_0516a0565603.jpg

Now on to these two. From GHQ, USS The Sullivans (DD-537) painted in Measure 1, and the HBG sculpt light cruiser USS Marblehead (CL-12) who always wore Measure 2 throughout the war. If I can get FOlewnik to put the Shamrock on the first stack of The Sullivans when he puts the scout aircraft on the Marblehead, as seen in the below wartime photograph, I’ll come back and edit the post.
DSC_0520a.jpg
DSC_0522a.jpg
DSC_0519a.jpg
DSC_0520a0553740.jpg
DSC_0520a0401208.jpg

The post previous to this post showed four Essex Class sculpts from HBG getting prepped and started with a base coat. Those are now completed and I had too much fun playing with them and the aircraft (that are complete so far) while I was taking photographs. I’m pretty sure I didn’t make any wooshing sea or aircraft noises or FOlewnik would have laughed at me. I was tempted though, and here’s why:
DSC_0524a.jpg
DSC_0525a.jpg
DSC_0526a.jpg
Above we have the first of the Long Hull Essex Class, USS Ticonderoga (CV-14) on the left looking as she did after her April 1945 refit from suffering a Kamikaze Attack on January 21, 1945, and USS Bunker Hill (CV-17) on the right. The Bunker Hill is wearing Measure 33, Design 6A, of which Navsource says, “Her port side camouflage pattern was the most intricate design applied to any carrier.” One glance can confirm that!
DSC_0526a021772.jpg

The final two Essex Class carriers are the USS Essex (CV-9) herself, and the USS Bennington (CV-20). The Essex is wearing a unique pattern, Measure 32v6, Design 10D, adapted from a destroyer pattern specifically for the long hulled Essex. The Bennington is painted in Measure 32, Design 17A.
DSC_0527a.jpg
DSC_0528a.jpg
DSC_0529a.jpg
DSC_0529aPattern_sheet,_MS_32a_17A_for_Essex_class.jpg
DSC_0529aUSS_Essex_(CV-9)_in_MS_32_6-10D_camouflage.jpg

Finally, some group pictures just for fun:
DSC_0531a.jpg
DSC_0532a.jpg
DSC_0533a.jpg
DSC_0534a.jpg
Thank you for checking out the post! If you liked it, please click the little heart. I’m trying to figure out why our post is only rated with a 2 when it seems it should be a bit higher if the other likes are any indication.

He was sent to the Russian front…

@John:

I don’t know what everyone else likes, but I like videos. For example, you showing everyone how to put these I 94 decals on or how you do those awesome dry brush techniques, you are always talking about, or the whole process of a painted piece, from the time you prime it to the finishing coat, including how to place the decals on.

Any of those would be cool videos! :-D

Good to know! I have never tried videos, as I don’t have the camera skills (or the camera, for that matter) to film close up like that. I have friends around who have the equipment though, so I might give it a shot.

@jwo1984:

Hey spitfire… I liked the layout of yor original painting tutorial… With stages photos befores and afters with descriptions under each photo and stage.  I would like too see some face washes you use on infantry men. And some washes you use for a variety of infantry moulds. Even a gallery too showcase some of your personal playing pieces would be cool!

I will definitely do a tutorial on washes! I’m planning on doing another in depth infantry tutorial, so that will feature the face washes you’re talking about.

@BJCard:

@Swedo:

Thank you, im not happy with the US star, i hate doing stars, they always look crooked. Tobad my russian carriers will probably never see action :(

You could just houserule a Russian carrier starting in the Baltic- hey, it is your house, your rules!

Awesome!

@Albert:

@Spitfire38:

I have looked at I-94’s decals and thought about it… the only ones I have trouble with are the Russian stars. I enjoy hand painting the insignia and I feel like it makes it look more uniform when it’s all paint, but like you said, it would definitely save some time  :lol:

Well you could save some effort there as Moscow ordered upper wing stars to be painted out on the eve of the German invasion……plain green was also changed to green with a black disruptive camo pattern   http://mig3.sovietwarplanes.com/index.html

I didn’t know that they painted over the top-wing stars. Thanks for sharing! If I were to paint them again, I’d probably leave them on or use decals, just for easy recognition on the game board, but I like knowing what was historically accurate.