My solution for magnetic carriers and fighters

Looks like Tumbling Dice 1/600 scale aircraft are a decent option to fill any aircraft holes. But they run a little small, more Classic fighter size than the current A&A fighters. And for fighters, cost competitive with HBG. Twin engined heavy fighters like the PE-2, and the Ki-45 are a good match to the OOB P-38, but smaller than the OOB Mosquito.

@CWO-Marc said in HISTORICAL DECALS for American Carriers.:

{snip}
CV-4, Ranger, was America’s first purpose-built carrier, and was twice as fast as Langley, but was about 10,000 tons smaller than the Yorktown class, and as I recall most or all of her WWII service was in the Atlantic/Mediterranean theatre, against two countries (Germany and Italy) with no operational fleet carriers in their navies.

Admiral King, the chief of the US Navy during World War II, wanted to refit the Ranger and send her to the Pacific. When his staff told him that the refit would cost just as much as a new-build Essex-class carrier, he changed his mind. The Ranger would be the only US carrier that was in commission on December 7th, 1941, to not face the Japanese Navy in World War II. Of course, not facing the Japanese Navy in no way prevented the Ranger from seeing action in World War II, just in the North African and European theaters.

-Midnight_Reaper

I used to have an income tracker like this - but I’d love to see a whole game! :)

There is a golf Tee system used by one of the players here in Toronto. Met him at YG’s Tourney this year. Pretty cheap. Two tees of the same colour. One goes in country of origin, and the other goes into the battle territory. Just need to paint a few sets of Tees different colours, or use ones that are already coloured. Worked out nicely. If they are small enough, they aren’t very intrusive at all.

@siredblood:

@GeneralHandGrenade:

I couldn’t find any magnets that thin. I just redid mine yesterday and had to use thicker ones. Good job Sired.

I don’t know if they have Home Depot in Canada, but that’s where I got it, if not, you can find it here :

http://www.homedepot.com/p/MASTER-MAGNETICS-3-4-in-x-26-ft-Magnetic-Tape-with-Dispenser-96774/204752648?cm_mmc=Shopping%7cTHD%7cG%7c0%7cG-BASE-PLA-D25H-Hardware%7c&gclid=CN-u3In81tECFUi2wAodQuQIAA&gclsrc=aw.ds

It has bad reviews lol, but it works good, just don’t stick to anything. However the drop of super glue seems to work, as they have never fell off.

Thanks for the comment cyanight, all your magnetic mods are pretty amazing!

We do have Home Depot (all over the place here), but they don’t seem to carry Magnetic Tape.,… well, they do, but it’s this stuff : https://www.homedepot.ca/en/home/p.12-x-10-magnetic-tape.1000418120.html?autoSuggest=pip which wouldn’t work as it’s a LOT thicker.

I HAVE however seen that stuff at Micheals Arts and Crafts. You’re right, it doesn’t stick well (or at all) so superglue is a must.

BAH!!! I was going to order them from https://www.litko.net/BMaker/ but if im going to custom order them I dont want to alter them. Especially if I go with something as clean as the Clear. I could go bigger… say match the size of the standard chips so they still stack nicely but i still think I will have the problem of them being top heavy in the end, especially since I want to have them 1.5" high and not just the one inch. I thnk Im going to hold out and try to snag up some 11mm dia 3mm thick steel blanks for a base. May take some time, but here’s to hoping

Hey all, new to the Axis and Allies forums and to customizing my ships. I apologize if this was answered elsewhere, but how do I size these carrier decals down to fit my ships? They look much bigger, and I’m assuming I need to arrange them onto a photoshopped page of some sort?

As a side note, i’m curious if anyone has made country symbols on a handy one piece sheet with all the countries included so that I can print out one set and decal up my whole set of models. I’m not sure if they have them in a 6mm size, or 8mm size etc.

If not I might have to try this on my own, but I didn’t want to recreate work someone else has already done.

I made these 5 carriers from Pearl Harbor Akagi,  Kaga,  Soryu,  Hiryu and Zuikaku.  I didn’t include the Shokaku because like the Shinano its a bland looking carrier.  Strange that we used the Shinano sculpt but chose not to name or represent it, lol.

I posted the process I used and other pics in a different thread.

http://www.axisandallies.org/forums/index.php?topic=34206.0