First Time painting units/starting my own paintkrieg

Some painting I did on my original pieces.
Japanese Navy.JPG Italian Navy.jpg Bismark.jpg

Japanese A&A Pacific 2nd Edition Color Match
Hey All.
If you are looking to match the default color for the Japanese, try Vallejo Liquid Acrylic 804 Transparent Orange and Model color 140 Flat Brown mixed 30 to 1 sprayed on an undercoat of 131 Orange Brown. It’s a dead match.
alt text

@cavestone I also use vallejo paints. The key question here is are you brush painting, or using an airbrush, or both?

The Vallejo paints have a “Model Air” line that comes pre-thinned. You can buy a thinning product (from them) to add to the “Model Color” series paints, which are the exact same thing, just more concentrated and thicker.

If you’ve never used an airbrush, its a bit finicky–it requires regular cleaning and a without a good brush and compressor the paint will flow very inconsistently. The process will be very frustrating unless you use the pre-thinned paints because the brush can only blow paint that is within a certain set of thickness parameters that are difficult to achieve, especially if you are trying to mix the air in the brush’s reserve or in small quantities. That’s why having copies of both Model Air and Model Color is fine by me–unlike Warhammer 40K I’m using primarily earthy colors, greens, dunkelgelb and dunkelgrau… other AFV and camoflage colors and so i don’t need a collection of primary or bright colors.

But I recommend it. The airbrush creates a sublime, beautiful layer and slight mix variations can be used to create shadows, grades, etc. Then you go back over with your brush, adding highlights, lines, details. Then, back over again with a drybrushing…then back to the airbrush to blast Flory Wash all over it.

Can’t see your photos, you can’t post photos until you have a certain post count. I wouldn’t use water to thin paints, they are water soluble but the mix and viscosity is all wrong (though water is obv. cheap and easy to clean up)

As for oil-based paints, these require thinner to clean up, they are much more difficult to drybrush with and are not used for airbrushing. The days of the old testors paints is long behind us–even apple barrel paints are easier to work with and cheaper. The early painting methods were much more about glomming thick layers of paint onto lead miniatures and the modern approach with water based paint and a series of different techniques creates much better results.

i just started painting mine.  Use spray paint.  Use Krylon grey or white primer.  After it primed spray it with the color you want as the base gray, green, earth, etc.  Then add the finishing touches the cockpit, nose, tail colors, etc.  The spray paint gives you a nice even coat.  Go light and fast over the piece about 6 inches away .  if you go slow you’ll put on to much paint.  no good you lose detail.  If you really want a sharp looking piece add decals.

look at some of my pieces on combat miniatures face book site.

Jeff Cam.

Wow, those must have taken you a long time to do. So much color variations, you have there, for the Italians. Super job on these. :-)

Very nice! Love them all!

Thanks

“painted playing pieces” are just that, decals are way out of scale, not the emblem the plastic of the decal itself is too nasty on minis this size. These paint jobs are amazing!