First Time painting units/starting my own paintkrieg

Ah, yet another good use for the coasters!

I was awarded the Customizer badge at some point unknown, but marked on my pictures post as to when I found out I was a recipient. There is a post somewhere on the forums that tells of the process and from what I recall one has to be nominated by someone to a moderator and there is some sort of review process. Here’s a link to the award discussion thread: https://www.axisandallies.org/forums/topic/24173/customizers-round-2

Glad you enjoy the pics and tips! We all inspire each other with our pictures, tips, and techniques, so keep sharing!

i just started painting mine.  Use spray paint.  Use Krylon grey or white primer.  After it primed spray it with the color you want as the base gray, green, earth, etc.  Then add the finishing touches the cockpit, nose, tail colors, etc.  The spray paint gives you a nice even coat.  Go light and fast over the piece about 6 inches away .  if you go slow you’ll put on to much paint.  no good you lose detail.  If you really want a sharp looking piece add decals.

look at some of my pieces on combat miniatures face book site.

Jeff Cam.

I have seen lots of people here use acrylics and I have on occasion. Most of my paints are enamels though. I find that is stays wet longer (which is a good thing) and doesn’t clump up nearly as much on your brush. I also use enamels in my airbrush. I find that enamels are actually much easier to clean than acrylics. While acrylics are water soluble, they don’t just dissolve, especially if already dry. It involves a great deal of scrubbing and scraping. With enamels, all you need is some mineral spirits cleaner and it takes the paint right off with very little effort. Cleaning acrylic paint out of my airbrush was hell the first time I did it… never using acrylics in there again. In terms of the finish, I can only assume that enamels hold up better to bumps and scrapes than acrylic paint does.

Someone once asked if enamels, by default, have a glossy finish to them. They do not, as long as you are using flat enamels, which seem to be the standard. I use flats and they have an excellent, non-shiny finish. I feel like enamel colors are a little deeper too, on the whole, but I suppose it depends on the brand of acrylic you use. Vallejo seems to be a popular choice for acrylics. I use predominantly Model Masters (Testors) enamels. In general, I would just said to find a brand you like to work with and produces the results you like. Don’t buy super cheap paint… you will get the results you pay for.

Good luck!

@mentok27:

Man now I wish I had some new stuff to share. But I didn’t finish any pieces  I started recently…. I did do quite a few Hungarian pieces but I was waiting till I did the Air Force as wel before I snapped a pic.

I lost a lot of time recently on the battlefield 1 beta.

No problem, you have inspired me to get back to painting. Due to health reasons, I haven’t done anything in a year, but I’m about to least, do some small jobs, here and there.

Can’t wait to see your Hungarian pieces. :-)

Cheers,

John

Thanks Spitfire38, for your kind words and encouragement, as well. Yes, looking forward to meeting you someday as well, whether painting or playing.

Thanks buddy! :-D

Cheers!

John

Nice! I like how you kept some of the original piece color in the mix on the French Navy. Lookin’ good all around!

––Calling “Viracocha”----

––My friend,…it’s been way too long since I’ve heard from you. I ALWAYS enjoy my conversations with you.

Tall Paul

Awesome!  Ready-for-the-desert scheme, sweet.