1940 Global table & painted pieces

Im not talking about a digital Map, but a real one. I consider myself very artistically minded so I think I could do it without it looking too bad. What materials would I need, how much time would it take? I wanna do a global map from about 1920.

@GeneralHandGrenade:

I was just going to fork over my roundels SS. Feel free to send a well equipped, well fed army capable of stemming the onslaught of fascism and imperialism at the dawn of the nuclear age.

Attack !!!

Smitty I sent you a PM

I do sell pieces cheaper than HBG plus I do have the 3 x 6  anniversary map also that I may part with.

Thank you for the positive feedback! I forgot to say that in the previous post, and it’s very important that I do. It’s very encouraging and motivating to get good feedback, and we certainly appreciate it. The above mentioned four Essex class carriers are complete, a long with several other ships of the US Navy, so its time to update the thread. Just ships by FOlewnik in this post. More aircraft are almost done but I haven’t put magnets in them yet (so not really done), so no aircraft pictures this post.

We’ll start with the two “odd men out” of the HBG sculpt Baltimore Class Heavy Cruisers. Why “odd men out”? Because in the below picture we have on the left, the USS Unnamed Baltimore Class Cruiser Wearing Measure 31a, Design 9C, and on the right is the USS Columbus (CA 74), which wasn’t commissioned until June 8, 1945. The cruiser with the long name is wearing a design that was never used, but was taken from a period design found at https://www.wikiwand.com/en/World_War_II_US_Navy_dazzle_camouflage_measures_31,_32_and_33:_cruisers. The USS Columbus is wearing a Measure 12 Modified designed by FOlewnik to match the pieces we’ll be using for the US Atlantic fleet. These will get aircraft added, but at the time of the photographs the decals on the wings of the aircraft were drying.
DSC_0510a.jpg
DSC_0511a.jpg
DSC_0512a.jpg
Pattern_sheet,_MS-31a_9C_for_Baltimore_class.jpg

Next up are some metal destroyers from GHQ. Below on the left, the very brave USS Johnston (DD-557) painted in MS-3_/6D as it looked when it was “Sunk by Japanese Warships off Samar October 25 1944,” and next to it is USS Van Valkenburgh (DD-656) painted in camouflage Measure 31, Design 9d. All Wartime photos taken from Navsource.org, a great resource for US Navy history buffs.
DSC_0514a.jpg
DSC_0515a.jpg
DSC_0516a.jpg

Below, the real USS Johnston shortly before her final battle, and the official design sheet:
DSC_0516a0555715.jpg
Pattern_sheet,_MS-31-32-33_6D_for_Fletcher_class.jpg

A great wartime picture of the USS Van Valkenburgh, which is the same on both sides:
DSC_0516a0565603.jpg

Now on to these two. From GHQ, USS The Sullivans (DD-537) painted in Measure 1, and the HBG sculpt light cruiser USS Marblehead (CL-12) who always wore Measure 2 throughout the war. If I can get FOlewnik to put the Shamrock on the first stack of The Sullivans when he puts the scout aircraft on the Marblehead, as seen in the below wartime photograph, I’ll come back and edit the post.
DSC_0520a.jpg
DSC_0522a.jpg
DSC_0519a.jpg
DSC_0520a0553740.jpg
DSC_0520a0401208.jpg

The post previous to this post showed four Essex Class sculpts from HBG getting prepped and started with a base coat. Those are now completed and I had too much fun playing with them and the aircraft (that are complete so far) while I was taking photographs. I’m pretty sure I didn’t make any wooshing sea or aircraft noises or FOlewnik would have laughed at me. I was tempted though, and here’s why:
DSC_0524a.jpg
DSC_0525a.jpg
DSC_0526a.jpg
Above we have the first of the Long Hull Essex Class, USS Ticonderoga (CV-14) on the left looking as she did after her April 1945 refit from suffering a Kamikaze Attack on January 21, 1945, and USS Bunker Hill (CV-17) on the right. The Bunker Hill is wearing Measure 33, Design 6A, of which Navsource says, “Her port side camouflage pattern was the most intricate design applied to any carrier.” One glance can confirm that!
DSC_0526a021772.jpg

The final two Essex Class carriers are the USS Essex (CV-9) herself, and the USS Bennington (CV-20). The Essex is wearing a unique pattern, Measure 32v6, Design 10D, adapted from a destroyer pattern specifically for the long hulled Essex. The Bennington is painted in Measure 32, Design 17A.
DSC_0527a.jpg
DSC_0528a.jpg
DSC_0529a.jpg
DSC_0529aPattern_sheet,_MS_32a_17A_for_Essex_class.jpg
DSC_0529aUSS_Essex_(CV-9)_in_MS_32_6-10D_camouflage.jpg

Finally, some group pictures just for fun:
DSC_0531a.jpg
DSC_0532a.jpg
DSC_0533a.jpg
DSC_0534a.jpg
Thank you for checking out the post! If you liked it, please click the little heart. I’m trying to figure out why our post is only rated with a 2 when it seems it should be a bit higher if the other likes are any indication.

@Maddog77:

@pfc_pander:

Love the M-1 Carbine, nice touch!

It’s fully functional too. My Dad carried one in Korea (He was an artillery man during the war) I have all the attachments for it (30 round mags, bayonette, heat shield, oil tube, etc.) It’s a very fun small caliber weapon to shoot. I like how it adds to the whole war room atmosphere so it just has to be displayed on the wall. I keep a trigger lock on it because I have young children running about and the rest of my hunting rifles are locked up in the safe. If anyone comes across a nice WWII propaganda poster or gadget for sale (from any country) please let me know. I’m really ramping up my collection.

My grandfather was in the 40th Infantry Division in Korea and he told me a story about how carbines were a prized weapon of choice in the infantry. Guys from other units had them and it got around that you could get your hands on one if you went to the showers and waited for a guy who had one to step into the shower. Then they would just take his gun.

He ended up doing just that.

I’m looking for digital mapmakers and digital publishing enthusiasts to help me develop a new map and professional-looking set of rules for an Axis & Allies homebrew set of rules. Any takers?

@CWO:

@wartorn:

EXCELLENT!!! These are amazing. These will be easy to trim out to just an outline. Thanks a bunch!!!

My pleasure.  Good luck with your project.  When you refer to putting the unit images in each country, are you talking about modifying a digital version of the map or are you talking about printing out something on paper and placing it on the physical map?  Just wondering.

I plan on modifying the digital map from YGH’s post a while back. I do like the map that cyanight made for his sheet metal table, so i think i may end up using that one (base map is the same as YGH’s, but with a couple of alterations)  http://www.axisandallies.org/forums/index.php?topic=33872.0

Hmm interesting cynight…. I recieved 4 hurricane fighters with my set… Is that standard with the order?  Thanks for the boiling water method I will try that this weekend and hopefully be Painting some units this weekend :)

Great looking table. I like the idea of having enough room to move around the countries based on the game you are playing. Two thumbs up!