1940 Global table & painted pieces

@CWO-Marc No problem, I just couldn’t bring myself to buy a $29.00 can of paint that would never bu used. I already had the Sakrete from a Hyphatufa planting pot I made. So there ya go. As soon as I figure out how to post pictures from my IPad to this forum I’ll update it.

Part 4: Starting the ships, adding decals to the tanks, skin tones on the soldiers

Today spent some time adding paint to the sprayed ships, including painting the water jettisons on the subs black (this was very tricky and ended up looking a little sloppy). Advice for painting the jettisons: toothpicks are not small enough! If you do use toothpicks, you’ll have to dab a dot of black for each tiny jettison.

The battleships were a bit easier, and painting the decks, bridge, and smoke stacks were all done in silver. I plan on adding the final grey coat last after the deck and stacks/bridge dry. I experimented with how to add the national emblem, and will probably opt for a white background with a red dot on the bow of the ship. In the future I may do that with the rear end of the ship.

I painted the tranny smoke stacks silver and added a white background for the emblem on the destroyers. All in all, the Japanese navy is coming along nicely.

The armor is pretty much done. I added a white flag to the front side of the armor and will be adding the red dots later. For the aircraft, I’ll be adding a red band around the rear part of the plane. I was debating between sky blue and red and may alternate just for some variety.

The soldiers got some skin! And I just want to say that adding the paint alone brings out the contours of their facial features in an excellent manner on their own. I may add a touch of black to certain areas of the face but that will be a last step. The next step will be panting their uniforms, rifles, and helmets.

After all this is done, I will be spray painting the japanese bombers white, the aircraft carrier black, and then will add the details to those. The Japanese are about 55% done all in all and I’m pleased with the results so far even if they do look a bit amateurish. Stay tuned.

IMG_6405.JPG IMG_6404.JPG IMG_6403.JPG IMG_6402.JPG

@AlphaKappa:

That is so helpful!  Thank you for the analysis!

It was my pleasure. A chance to pull out my games and admire them? If I must…  :-D

@AlphaKappa:

It’s too bad Avalon Hill didn’t print the new Anniversary Edition in the same colors as Europe '40 Second Edition.  I really like the lighter shade of those Italian pieces because they’re easier to distinguish from Soviet red-brown.

To be fair to Hasbro/WotC/Avalon Hill, all they promised was a re-print. And to a large degree, that is what the New A&A Anniversary edition was: a straight up re-print of the original go at things. Were there differences between the two prints? Of course there were. Were all of those changes for the better? I don’t think so, no. I especially wish they had kept the US F6F Hellcat fighters but instead we got more P-38 Lightnings. But overall, it was probably as faithful as they could do and a long shot better than either 1) not doing it at all (what a pity that would have been) or 2) just phoning it in and wholesale dumping all of the right pieces from A&A 42 and A&A Europe 40.1 Italy.

Instead, we got the original Anniversary Edition Italian tank, the M14/41. We got the Italian brown Japanese Betty bombers and Type 92 Howitzers (artillery). And they put them into a shade about as close as to the shade of the original Anniversary Edition Italians as they were going to get from two print runs separated by 9 years. And that meant that we got a bunch of Italian brown German ships and fighters. But we got a re-print of a game I didn’t think was ever coming back.

And for that, I don’t mind dark brown Italians. Even if I would have rather gotten the F6Fs and the Maroon UK Country class cruisers, I’m happy with what we did get.

-Midnight_Reaper

@mentok27:

Man now I wish I had some new stuff to share. But I didn’t finish any pieces  I started recently…. I did do quite a few Hungarian pieces but I was waiting till I did the Air Force as wel before I snapped a pic.

I lost a lot of time recently on the battlefield 1 beta.

No problem, you have inspired me to get back to painting. Due to health reasons, I haven’t done anything in a year, but I’m about to least, do some small jobs, here and there.

Can’t wait to see your Hungarian pieces. :-)

Cheers,

John

Redleg,

First, you have a beautiful family. Second, Your paint jobs look great. I have to really give applause to your freehand markings. It’s true decals are cleaner and sharper but I my self have used none on anything I’ve painted and I’m developing a way to layer and paint my own markings (It’s been holding up my project severely) I simply can’t afford to buy sheets of decals that I might only use a handful of.

One tip That I’ve adopted, is to use ultra-fine Sharpie permanent markers for small lines and details where a brush won’t do or may slop (canopy frames). Lastly I’ve learned from table-top gamers of much larger scale (Warhammer, Bolt Action) models that at the scale Axis & Allies models are you can “mass paint” with fewer details on many units to create large armies, fleets and air forces that will look phenomenal from eye level to table top . Anyway us A&A painters have our work cut out for ourselves. I salute you sir.

Anyway, keep on painting, Nice work.

@Intrepid:

/how’s that for my 3rd and 4th posts ever, haha! Been a member of this forum since 2007, but I’m the ultimate lurker (mostly because I know I’m too easily tempted to get long-winded!)

You have exercised an extreme amount of restraint posting 4 times in almost 10 years. Glad you chimed in here.

I like the whole idea of pulleys and storing it high on the ceiling. Nice job.

Awesome!  Ready-for-the-desert scheme, sweet.