1940 Global table & painted pieces

Thanks for all the responses, folks - exactly what I needed to hear.

I have seen lots of people here use acrylics and I have on occasion. Most of my paints are enamels though. I find that is stays wet longer (which is a good thing) and doesn’t clump up nearly as much on your brush. I also use enamels in my airbrush. I find that enamels are actually much easier to clean than acrylics. While acrylics are water soluble, they don’t just dissolve, especially if already dry. It involves a great deal of scrubbing and scraping. With enamels, all you need is some mineral spirits cleaner and it takes the paint right off with very little effort. Cleaning acrylic paint out of my airbrush was hell the first time I did it… never using acrylics in there again. In terms of the finish, I can only assume that enamels hold up better to bumps and scrapes than acrylic paint does.

Someone once asked if enamels, by default, have a glossy finish to them. They do not, as long as you are using flat enamels, which seem to be the standard. I use flats and they have an excellent, non-shiny finish. I feel like enamel colors are a little deeper too, on the whole, but I suppose it depends on the brand of acrylic you use. Vallejo seems to be a popular choice for acrylics. I use predominantly Model Masters (Testors) enamels. In general, I would just said to find a brand you like to work with and produces the results you like. Don’t buy super cheap paint… you will get the results you pay for.

Good luck!

I keep my games separate, however I add pieces to them from HBG.

That is a very nice blending of colours. well done and keep up the good work.  :-D

Yes thats what I’m talking about. Design my own Battle Boards save to file and then get printed. Just need it were its protected from finger print smears and any other stuff.

Thank you YG and DK.

The next group of infantry, will be, DESERT LIGHT INFANTYRY.

Until next time.

Cheers!

John

This will be the last pictures until the end of the year.

The US EUROPEAN FORCES will be the next set that graces my map, followed by the GERMANS, but it will be awhile before the Axis can get on the board.

I hope you have enjoyed the pictures.

Until next time.

Over and out! :-D

@Darkshadow:

Thanks guys, I have copies of Europe and pacific 2nd ed and recently bought some of HBG’s fantastic sculpts but was wondering what to do with my 41 pieces, I guess for the most part simplest thing would be to spray them for the correct nation (though I doubt Russia will ever need 6 carriers).

Oh… I do believe I understand now. And yes, your best option is probably to spray them to match the correct nation (as best you can anyway). If you do not want the ones you cannot use, you could list them in the Marketplace section of the forum and see if anyone wants to buy or trade for them.