Board Game Pieces

I have been playing around with different configurations for a custom table and wanted to note some things I’ve landed on that I really like. A main one thing is having the map mounted so that it can slide around as needed on top of a bigger playing area. My table is 65” x 95” in total with a 5.5” arm rest around the outside and the middle is a recessed neoprene surface. I have the OOB Global map mounted on 1/2” rigid foam with a 1/2” aluminum frame around it. This allows the map to slide up close to whoever’s turn it is, but then be in the middle so both players can roll dice In front of them without disturbing the map and in easy view of the other player. (Plus we like lots of room to roll the bones). This ability to adjust the surface along with a standing height, makes it comfortable for long uses because you can move around more and don’t feel as tied down.
Things I’ve learned and changed from original design - I originally used too big of a frame for the map and mounted it on too high of a foam block (you can see these pictures at the bottom) - it made it hard to see the other player’s dice and the big frame took up too much real estate. My global map is mounted on much thinner foam (the framing is bad, you can see if you look closely) but I also used much thinner aluminum angle for the frame. This gives just enough grip when needing to move the map around (I use furniture slides on the bottom, which glide very nicely on the neoprene) but doesn’t make the whole thing too bulky. Having it an inch or so off the surface keeps the dice off, but isn’t so heigh that you can’t see the other player’s dice rolls. When playing other versions (such as Zombies) the board is much smaller, but it can easily swap in and out on the same table since it can move around where ever it is needed or be pushed aside.
I originally made it normal table height, but found long reaches while sitting were harder and it just felt cramped. Standing height with a bar stool is a great way to have the best of both worlds.
The 5.5” rim around the table itself gives you a nice arm rest that doesn’t interfere with the gaming surface. I’m playing with how to best add some cushion to this part - open to suggestions. Sometimes I just lay a piece of leftover neoprene on it.
Dice bounce nice on the neoprene and stay off the floor. It also feels nice and has enough give to allow things to slide but be picked up easily. Wouldn’t definitely go with neoprene again as a surface covering.
I made the drawers open to the inside of the table so you can stay hunched over the action while accessing and stowing stuff away. 50/50 on whether I would keep this if I were to do it again. If I were doing it again, I might try to build customer drawers form scratch using actual drawer glides, but that was beyond my ability when I first did this, so I just used clear plexiglass boxes with aluminum pulls mounted on them. It’s nice having them clear, and I was happy with how the pulls came out, but without glides they can be a little fussy sliding in and out of their slots.
I originally designed the table so that I could put a cover surface back on top when not in use, but find I don’t really ever do that, so if I were to do it again, I might not mess with that part (I never even finished staining those as you can see in the pictures).
CF362D52-269F-4480-8CBB-08139099138F.jpeg A9E12EA1-66EB-4671-86AC-68C62FD30AD5.jpeg 858DE1F2-030A-4D5A-93E4-70A7D1180ADB.jpeg 8F513EE0-DA37-4BA9-880E-4D5EF7BF431F.jpeg F0188165-757B-4CC1-BF67-5045832283C9.jpeg 2E3CD627-0D31-4121-ACF8-682F9F58A40B.jpeg

@WoodyWanKenobi:

@cyanight:

Here are some of each.

cyanight, you are a living legend.
Speedy reply and I never would of found that in the millions of posts in this forum

Thanks mate
Woody

Thank you :) I printed my map at Fastsigns for around $550 but it has a metal back for the magnetic pieces.

@Duff:

I tried to post photos for you but this forum won’t let me post links for some reason.

Because of the forum’s anti-spam software, you need to have a certain minimum of posts (I think it’s 10 but I’m not sure) before the forum gives you the option to post attachments.

Hmm interesting cynight…. I recieved 4 hurricane fighters with my set… Is that standard with the order?  Thanks for the boiling water method I will try that this weekend and hopefully be Painting some units this weekend :)

jwo1984 & Others,

––This thread shows how the Shipyard was made by Ebard re-designing his Dry Dock, adding a large wharf area, adding a second crane, several warehouses, storerooms, and supplies to the dock area including some pics of the finished painted units. Enjoy, and ask any other questions you might have.
––It Also shows his Small Naval Base and Air Base (straight) units.

Tall Paul

@jwo1984:

hey guys, so I was searching some camo desert schemes for HBG’s Valentine medium tank and came across this one. � However looking at the sculps I knew it would be tough to paint these blue lines in because most of the tank is all track! so I cut out and shaped some track guard armour like the photo below just using some clear flexible plastic and glued in too the sides…making these two tanks mk II’s which look to have had the side armour as a pose to the Mk V that HBG has sculpted.

I’m sure whatever you do too it, it will turn out great. Can’t wait too see it painted. Good luck buddy! :-D

@Darkshadow:

Thanks guys, I have copies of Europe and pacific 2nd ed and recently bought some of HBG’s fantastic sculpts but was wondering what to do with my 41 pieces, I guess for the most part simplest thing would be to spray them for the correct nation (though I doubt Russia will ever need 6 carriers).

Oh… I do believe I understand now. And yes, your best option is probably to spray them to match the correct nation (as best you can anyway). If you do not want the ones you cannot use, you could list them in the Marketplace section of the forum and see if anyone wants to buy or trade for them.

Wow that woodburning is top notch! I have other skillsets pertaining to my hobbies, but that is certainly not one of them. I am very impressed with this.