Painting pieces!

Anybody have any liks to non HBG World War One naval and air units in Axis and Allies scale???

Need Konig Class Dreadnoughts and iconic ships of the period

@cavestone I also use vallejo paints. The key question here is are you brush painting, or using an airbrush, or both?

The Vallejo paints have a “Model Air” line that comes pre-thinned. You can buy a thinning product (from them) to add to the “Model Color” series paints, which are the exact same thing, just more concentrated and thicker.

If you’ve never used an airbrush, its a bit finicky–it requires regular cleaning and a without a good brush and compressor the paint will flow very inconsistently. The process will be very frustrating unless you use the pre-thinned paints because the brush can only blow paint that is within a certain set of thickness parameters that are difficult to achieve, especially if you are trying to mix the air in the brush’s reserve or in small quantities. That’s why having copies of both Model Air and Model Color is fine by me–unlike Warhammer 40K I’m using primarily earthy colors, greens, dunkelgelb and dunkelgrau… other AFV and camoflage colors and so i don’t need a collection of primary or bright colors.

But I recommend it. The airbrush creates a sublime, beautiful layer and slight mix variations can be used to create shadows, grades, etc. Then you go back over with your brush, adding highlights, lines, details. Then, back over again with a drybrushing…then back to the airbrush to blast Flory Wash all over it.

Can’t see your photos, you can’t post photos until you have a certain post count. I wouldn’t use water to thin paints, they are water soluble but the mix and viscosity is all wrong (though water is obv. cheap and easy to clean up)

As for oil-based paints, these require thinner to clean up, they are much more difficult to drybrush with and are not used for airbrushing. The days of the old testors paints is long behind us–even apple barrel paints are easier to work with and cheaper. The early painting methods were much more about glomming thick layers of paint onto lead miniatures and the modern approach with water based paint and a series of different techniques creates much better results.

Ah, yet another good use for the coasters!

I was awarded the Customizer badge at some point unknown, but marked on my pictures post as to when I found out I was a recipient. There is a post somewhere on the forums that tells of the process and from what I recall one has to be nominated by someone to a moderator and there is some sort of review process. Here’s a link to the award discussion thread: https://www.axisandallies.org/forums/topic/24173/customizers-round-2

Glad you enjoy the pics and tips! We all inspire each other with our pictures, tips, and techniques, so keep sharing!

@AlphaKappa:

That is so helpful!  Thank you for the analysis!

It was my pleasure. A chance to pull out my games and admire them? If I must…  :-D

@AlphaKappa:

It’s too bad Avalon Hill didn’t print the new Anniversary Edition in the same colors as Europe '40 Second Edition.  I really like the lighter shade of those Italian pieces because they’re easier to distinguish from Soviet red-brown.

To be fair to Hasbro/WotC/Avalon Hill, all they promised was a re-print. And to a large degree, that is what the New A&A Anniversary edition was: a straight up re-print of the original go at things. Were there differences between the two prints? Of course there were. Were all of those changes for the better? I don’t think so, no. I especially wish they had kept the US F6F Hellcat fighters but instead we got more P-38 Lightnings. But overall, it was probably as faithful as they could do and a long shot better than either 1) not doing it at all (what a pity that would have been) or 2) just phoning it in and wholesale dumping all of the right pieces from A&A 42 and A&A Europe 40.1 Italy.

Instead, we got the original Anniversary Edition Italian tank, the M14/41. We got the Italian brown Japanese Betty bombers and Type 92 Howitzers (artillery). And they put them into a shade about as close as to the shade of the original Anniversary Edition Italians as they were going to get from two print runs separated by 9 years. And that meant that we got a bunch of Italian brown German ships and fighters. But we got a re-print of a game I didn’t think was ever coming back.

And for that, I don’t mind dark brown Italians. Even if I would have rather gotten the F6Fs and the Maroon UK Country class cruisers, I’m happy with what we did get.

-Midnight_Reaper

Appreciate the comments. You must have been busy the last few days. Haven’t seen any of your work.

Are you and your friend painting anything, this week?

@AlphaKappa:

How does their height compare to the OOB infantry pieces?  The pictures on HBG’s website make them look pretty tall, but without seeing them side-by-side, it’s hard to tell.

Can anyone offer any insight, or maybe even post a picture (if you’re feeling generous with your time)?  Any advice would be appreciated!   Thanks.

Note that the OOB infantry sculpts aren’t all the same height; they vary from nation to nation, as you can see from some of the pictures I posted here:

http://www.axisandallies.org/forums/index.php?topic=30440.0

@Tall:

Guys,

––Here is an “in-process” pic of one of the U.S. Navy APD Fast Transports. These are the famous
“Green Dragon’s” that were re-built from WW-1 ‘four-piper’ Destroyers into Fast Transports to assist the Marine Raiders in their endeavors. The paint scheme utilises “Allworkandnoclay’s” talent to the max. The units are from Shapeways and have had their depth-charge racks removed so as to have the 48-star U.S. Flag applied to their stern decks. More on these six ships as they progress. Enjoy!
––Unless I’m mistaken these are the first highly detailed, painted and decalled SHIPS that the
WarMachine has done so far.

Tall Paul Â

That is definitely a cool looking transport. :-D

Thank you Paul. These all look very cool. Looks like I have a few options.

Jon