FLYER FOR 2ND EDITION E40 AND P40 IS OUT- SEPTEMBER 18TH, 2012

No problem. I dont own it and havent played it. I did take the time to post the links (found them in my travels) and read them…to help you AND others that may be asking similar questions.

I’m happy to have been of service.

Thank you very much Young. I’ll follow your advice. Would you recommend using your home rules (national objectives and R&D) also to complete newbies?

If UK attacks and does not finish the standing army off, the standing army stays there.

I generally represent such a scenario with French units atop of chips as the French are the least utilized army.

If the Axis then moves in, you would represent all units there with the Axis nation that claims the remaining standing army.  So in example:

UK attacks Turkey and has to retreat after killing 4 units.
Put 1 French Inf atop of the remaining units (3, I think?)
Italy then moves in and claims Turkey.
Remove the French INF, place an Italian INF atop the chips.  They now move and act as Italian units.

Pretty sure that is how the scenario would work.  Just remember that claiming neutral standing armies is part of the NCM phase, so those units in Turkey can only defend until the subsequent Italian turn.

@Commando:

@ghr2:

@Commando:

@ghr2:

Brando, why would you leave 1 inf in each territory?  The only ones that matter are rostov and Baltic States.  You will lose 6 ipcs in units for not much gain in epl/bess.

I leave 1 Inf in each territory, so the Axis/enemy can’t just walk in. Inf have a 33% chance of a hit. Prevents a country from just taking a territory w/1 Inf. Usually the attacking country has to attack w/2 ground units, just in case your Inf gets a hit. Also prevents the enemy from sending just one ground unit on a long walk across your territories(i.e. when Japan starts marching across the Soviet Far East). I don’t always do this. Like in China, I consolidate the Chinese Inf whenever possible. But in Russia, I always try to leave at least 1 Inf in each territory. One thing to point out, I don’t leave 1 Inf in each territory, unless the enemy has a chance to take that territory.

Because they only have a 33% chance to hit, I would not want to risk giving away nearly free infantry kills to Germany unless they are defending something valuable.  Each infantry you put in his way is 1 less body defending something critical for a 33% chance to kill 1 thing.

It’s not just a 33% chance of killing something. It’s making the enemy commit more than 1 Inf/1 ground unit to take the territory How would this hurt a country like germany that will have mechs constantly reinforcing and the positioning does not screw him?. Maybe you didn’t read my entire post. Again, I don’t always leave 1 Inf behind in each territory(i.e. China and other territories) Japan can just send 1 inf and air, it really won’t hurt him if he wants to.. However, leaving 1 Inf behind on such things as islands, even 1 IPC islands. Your enemy would most likely have to commit at least 2 ground units to take the islandIt depends on the value of the island and the likelihood he/she would go for it.. Therefore, forcing your opponent to commit more resources to take territories and have less units to use elsewhere. I understand what you mean, but this is also a game of economics and efficiency.  If your opponent does not need to go for it, or is not even affected by it, the one infantry won’t be an issue.Like I said in my explanation, Soviet Far East is a good example. There are 13 IPC’s from Soviet Far East to Vologda/Samara. If your strategy is to leave these unguarded for Japan to just take w/1 Inf, then go for it. In my opinion, over the 26 years I’ve played A&A, it’s the wrong stategySince russia can easily stop japan from taking it unless Japan commits more to the front, it really is not an issue.  Also, with mongolia, it won’t be unguarded.

@capnstak:

Is there a significant difference between the two or could I use the videos from Alpha 3.5 rules and apply the same way as with 2nd edition?

It should work.  The big difference is that the UK has 1 less Infantry in Egypt in 2e, and 2e has the rules about the Soviet-Mongolian defense treaty.

@Young:

Can T-Bombers scramble into an adjacent sea zone from an airbase, or is that just for fighters as well?

T bombers can scramble.

I just made a quick guide as we are new and learning the new rule set with these same questions.

Scramble
A quick reaction team of no more than 3 defending fighters and/or tactical bombers  located on each island or coastal territory that has an operative air base can be scrambled to defend against attacks in the sea zones adjacent to those territories.

Scrambling is a special movement that the defender can make at the end of this phase.
It must be done after all of the attacker�s combat movements have been completed and all attacks have been declared.
The attacker may not change any combat movements or attacks after the defender has scrambled.

These air units can be scrambled to help friendly units in adjacent sea zones that have come under attack. They can also be scrambled to resist amphibious assaults from adjacent sea zones, whether or not the
territory being assaulted is the territory containing the air base.
They may defend against the enemy ships conducting the amphibious assault even if friendly ships are not present.

A quick reaction team on 3 defending fighters and/or tactical  located on each island or coastal territory that has an operative air base can be scrambled to defend against attacks in the sea zones adjacent to those territories.

In situations where a sea zone is adjacent to more than one territory containing an air base (sea zone 109 and
Scotland and United Kingdom, for example), each of the territories can scramble up to 3 fighters and/or tactical
bombers.
In situations where a territory containing an air base is adjacent to more than one sea zone (United
Kingdom and sea zones 109 and 110, for example), the territory may still only scramble up to 3 fighters and/or
tactical bombers, but they may be split between the sea zones in any combination.

Scrambled fighters and tactical bombers are defending, so refer to their defense values.
Fighters                   Tactical Bombers
Defense: 4                       Defense: 3

They are treated as normal defending units in their sea zones. As defenders, they may not retreat. They
can�t participate in any other battles during that turn, including a battle in the territory from which they were
scrambled.

After all combat is completed, each surviving scrambled air unit must return to the territory from which it was
scrambled. If the enemy has captured that territory, the unit can move 1 space to land in a friendly territory or
on a friendly aircraft carrier. If no such landing space is available, the unit is lost. Surviving scrambled air units
land during that turn�s Noncombat Move phase, before the attacker makes any movements.

Amphibious Assault Sequence
1. Sea combat
2. Battleship and cruiser bombardment
3. Land combat

Step 1. Sea Combat
If there are defending surface warships and/or scrambledair units, sea combat occurs.
If there are only defending submarines and/or transports, the attacker can choose to
ignore those units or conduct sea combat.

If sea combat occurs, all attacking and defending sea units present must participate in the battle. (Even if the
attacker chose to ignore defending submarines and/or transports, they will still be involved in the battle if the
defender scrambles air units and forces a sea battle.)

Conduct the sea combat using the rules for General Combat (below), then go to step 3 (land combat).
No bombardment occurs.

Strategic and Tactical Bombing Raids
Fighter Escorts and Interceptors
Defenders uses interceptors-Any number of defending fighters (not tactical bombers) may intercept.

� The attacking bombers and fighter escorts and the defending fighter interceptors will be the only units
participating in this special combat.
� The combat lasts for only one round.
� All of the air units have attack and defense values of 1.
After the air battle is complete, or if there were no defending fighter interceptors, surviving fighter escorts
are considered to have retreated. They don�t participate in the actual bombing raid, are not subject to antiaircraft fire, and will remain in the territory until the Noncombat Move phase. Any surviving attacking bombers carry out the bombing raid. If the territory offers more than one target, the bombers may be divided into groups, and each assigned a specific target (tactical bombers may not attack industrial complexes).

Each complex and base rolls one die against each bomber directly attacking it.
For each �1� rolled, a bomber of the attacker�s choice is immediately removed.

An industrial complex can�t receive more than 20 total damage for major industrial complexes and minor ones can�t receive more than 6 total damage for. Air bases and naval bases can�t receive more than 6 total damage. Damage exceeding these limits is not applied.

After resolving the antiaircraft fire, surviving bombers each roll one die.
Add 2 to each die rolled for a strategic bomber (but not for tactical bombers), then total the results.

Strategic Bombers 1-6+2 against an enemy industrial complex, air base, or naval base.
Tactical Bombers   1-6     against an enemy air or naval base.

You’ll need a dd G1 or G2 if you want to attack G3.

Normandy G1 is not part of my Sealion plan, especially when you won’t be able to swing the 10 tt cause you’ll need to buy a dd.

Think about Scotland landings on G2 and G3.  To do this safely, occasionally additional AC or dd purchases are necessary.

Don’t stake everything on a G3 landing with less than 90% odds.  You can land Scotland and take it G4.

Yep. Global has issues.

I wish the allies had more NOs and japan too, but it would make things more complicated. Maybe just nix a germany or italy NO.