GLOBAL MAP AVAILABILITY FOR MOUNTING AT HOME

Nope this is the only version I have, sorry.  The magnets are small and very strong so the grey and red counters stack really well and look great with a figure on top.  Here is the map and miniatures i did for 1942.  I got that map from the 1942 forum (I think) and cant claim credit for it.  Apologies for the quality of the pics (they were taken with my phone).

some more pics, this one I had to print in sections myself (a lot of bother) and glued the sheets to a piece of sheet steel, then I covered the whole map in clear adhesive vinyl (to protect it) and then glued the steel sheet to a piece of mdf board.  Thats why Im going to get this new map done properly in one piece.

typical stack

infantry stack, works great guys…give it a try.

Got them from ebay, no idea of the brand but they are about 8mm in diameter and about 1mm thick.  They are usually sold in lots of 10 or 20 and are not that expensive.  I’ve been using them for a while for my other hobby (battery hatches for my rc model aircraft) so I’ve always got a few about.  Thats how the idea first struck me to do a magnetic wall version. One more thing I have to add, …dont forget to rough up the area you’re gluing the magnets to as this will improve their adhesion.  I’ve had a few “separations” because I didn’t do it.

5 minute epoxy, though you can only do about 10 at a time before it starts to go off.  but you could use 30 min and get an entire nationality done in one go.

Its about .5 mm thickness, the sheet of mdf is 1500mm x 800mm, that is the size piece of steel im going to get and the size that i will have the map blown up to, so its a neat fit on the board. Im going to stick this new map on the back of the 1942 mapboard, then just flip it over when i want a change.

I think you might have told them 5mm??   its not 5mm thick, its point five i.e. 0.5mm (half a millimetre) thickness. they must have thought you were building a jap tank. lol

darn my spelling…  yes your right about Palau…and correct about missing or different shaped islands in the pacific.  The paint program I was using allowed me to cut and paste the sea into the island zones but it meant chopping some of the islands out and having to repaint them.  I missed a few of the very small islands altogether (didn’t bother putting them in) as they were so small as to be insignificant on the map anyway (you couldn’t place pieces on the land anyway), so providing there was a name and a roundel in the sea zone it’s clear enough that there is a land mass there.  Cyprus is a case in point (Its under the roundel. :-)…)  Though I was in a hurry to get the map done… so these pick-ups by you guys are to be expected (and welcome).  If there is something serious that will affect game play then Id really appreciate if you could let me know and I will fix it up fix up, then I will do these few spelling errors (and put in a couple of “green spots” where the islands should be at the same time).  Thanks guys. :-)

Sorry GH…only answered your second question.  Heres the first about the metal.  I used ordinary sheet metal, the same that is used for shaping air conditioning ducts.  Its thin and much more light weight as a result.  There’s no corrosion under my current map but it is indoors all the time.  Also the plastic covering was folded around the edges before I glued it to the mdf board.  There is just no chance of moisture getting to it.  Hope that helps.