Painted playing pieces

@655321 decals very small decals and I bought 3 of those sets so there is that. Lol

4E43E286-8F3E-4AC1-84BC-E732B0B7EB2F.jpeg CA95B30E-914A-4105-9C05-22B533ECF2FF.jpeg

@Trenacker:

I look forward to buying some cruisers and battleships from you in the next month or so. What is the appropriate scale to match up with OOB pieces?

On the left-side of my shop homepage there is a list of categories. Anything in the “Axis & Allies” categories is sized to exactly match the OOB pieces. Avoid the 1/1800, 1/2400, and 1/4800 scales. Also all of my models should have their dimensions listed in their descriptions, so you can verify the size if you’re interested.

Thanks John, ill update this thread once more later when I finish those other troops… Oh I also replaced the some of the Japanese artillery with some from HBG, after which, I kinda liked the OOB ones better lol.

I have seen lots of people here use acrylics and I have on occasion. Most of my paints are enamels though. I find that is stays wet longer (which is a good thing) and doesn’t clump up nearly as much on your brush. I also use enamels in my airbrush. I find that enamels are actually much easier to clean than acrylics. While acrylics are water soluble, they don’t just dissolve, especially if already dry. It involves a great deal of scrubbing and scraping. With enamels, all you need is some mineral spirits cleaner and it takes the paint right off with very little effort. Cleaning acrylic paint out of my airbrush was hell the first time I did it… never using acrylics in there again. In terms of the finish, I can only assume that enamels hold up better to bumps and scrapes than acrylic paint does.

Someone once asked if enamels, by default, have a glossy finish to them. They do not, as long as you are using flat enamels, which seem to be the standard. I use flats and they have an excellent, non-shiny finish. I feel like enamel colors are a little deeper too, on the whole, but I suppose it depends on the brand of acrylic you use. Vallejo seems to be a popular choice for acrylics. I use predominantly Model Masters (Testors) enamels. In general, I would just said to find a brand you like to work with and produces the results you like. Don’t buy super cheap paint… you will get the results you pay for.

Good luck!

@AlphaKappa:

How does their height compare to the OOB infantry pieces?  The pictures on HBG’s website make them look pretty tall, but without seeing them side-by-side, it’s hard to tell.

Can anyone offer any insight, or maybe even post a picture (if you’re feeling generous with your time)?  Any advice would be appreciated!   Thanks.

Note that the OOB infantry sculpts aren’t all the same height; they vary from nation to nation, as you can see from some of the pictures I posted here:

http://www.axisandallies.org/forums/index.php?topic=30440.0

Redleg,

First, you have a beautiful family. Second, Your paint jobs look great. I have to really give applause to your freehand markings. It’s true decals are cleaner and sharper but I my self have used none on anything I’ve painted and I’m developing a way to layer and paint my own markings (It’s been holding up my project severely) I simply can’t afford to buy sheets of decals that I might only use a handful of.

One tip That I’ve adopted, is to use ultra-fine Sharpie permanent markers for small lines and details where a brush won’t do or may slop (canopy frames). Lastly I’ve learned from table-top gamers of much larger scale (Warhammer, Bolt Action) models that at the scale Axis & Allies models are you can “mass paint” with fewer details on many units to create large armies, fleets and air forces that will look phenomenal from eye level to table top . Anyway us A&A painters have our work cut out for ourselves. I salute you sir.

Anyway, keep on painting, Nice work.

These pieces look great. I especially like the armor.

What’s your running cost for a fully painted set of say… one nation?

Is it per piece or?

Like if I take my Europe, OOB set of German pieces, and send them to him, what would you expect the price range to be?