Desert rat churchill, with interchangeable guns

I picked up 16 guns from the Underground Arsenal project and started building them this week-end. They went together beautifully and look great. They include the bases also. They should add some flavor to the gaming table and expand indirect fire capabilities. Here’s a peak at the unfinished project. The 100mm Skoda gun was available for axis minors but I didn’t pick them up.

All the guns

25 pounders and US 105mm

German 105mm and Russian 122mm

Close-up of Russian 122mm in primer on base

This is a complete diorama, and the 88 flak comes off for use all by itself. Crew are positioned so the gun (which swivels) can rotate without hitting any. The front shield comes off, for use as the “other” flak. Thier is also a high velocity crucible mount 88mm AT gun which will mount on this very same base. This high velocity 88 is part of another order, and isnt completed yet.
  Scrb brushes (3) are on the base, and made with camel hair. Resin cast ammo crates and ammunition are present. But no empty shell cases, as this crew has just set up. One crewman is pulling the camo netting down to be set up. Note that many of the crewman have had weapons and excessive packs removed, since heavy gun crews left such things on thier vehicle. One man has had his jacket trimmed down and now looks to be wearing just his white undershirt. One man has a panzershriek modified into a rangefinder.
.

.

.

I dont remove the paint underneath. I apply a light coat of primer and paint over it.

Well, what I meant by V1 & V2 was the 2 different scales AAM collectables made thier minis.
I can certainly make V1 or V2 rockets, if that is what you are asking, but I need to know in what scale, and how detailed you want them.
    One guy asked me to go ahead and make some, and if he liked the price, he might buy some, AFTER I made them. Needless to say, I cant work that way.
    If you have interest in getting a quote on such work, give me an e-mail at timdrocks@mchsi.com. My name is Jim (not TIM, lol)

After using my Sd251s and Sd234s I realized I needed a couple more, cheaper units, to throw into battle as “disposbale guns” that I didnt mind losing if they never got a shot off. I also got tired of my 75mm AT guns being too weak, and my 88 flaks being too easy to hit, so I made my fav gun, the low-profile 88mm high-velocity AT gun by adding a nashorn gun to the base of a 75mm gun. I included a 75mm gun in the pic for comparison to my new 88. No worries, the Nashorn which lost its gun to make this, was put to good use - it became a Hummel.
  I was short on 75mm guns too, so 1 of these RSO’s is short a gun yet, to be made and added later.
  I made the RSOs by chopping Marders down to just the treads, and enough of the front and back hull to hold them together. Clear plastic (cut from a football card protector and sanded so glue would work on it) is the base for the superstructure, and provides the surface to mount the gun on. Balso is what the superstructure is made from, and paper is used extensively in it, especially to makes the hull sides smooth. Brass is used for the drivers seat. When I used my reference pics I noticed thier is stuff on the sides of these, not sure if it is loose legs for the guns, or some form of apparatus for folding the sdies of the vehicle down. But in either case, I just used some pieces from old model ships that gave an approximate look, and they are not 100% accurate. I just didnt like the completely flat sides I had, and had to add on something.

Of course, I dont have any actual Brenn Guns, so Vickers guns had to do, but they fit quite neice. Crew are from Brit MG team (previously cannibalized for the guns, I knew the chopped-up gunners would be worth saving for something) and some of the Rats crew are from the HQ unit.
  All have treads paintes rust orange with black/brown ink mix over that, then silver added. Chassis have fender and hull rust, as well as weathered-over insignias.
  3x Desert Rats Valentines and 3x Rats Crusaders to come soon.