How to create magnetic carrier based planes

Hello everyone. I wanted to share my latest Essex class carrier customization.

Essex 1200x900.jpg

There is a famous picture of an Essex class carrier where the hull camouflage is prominently displayed. I wanted to reproduce this late war hull pattern for piece and give it a deck a similar style as my other US carriers.

Essex Carriers.jpg

I used this image as my source for port and starboard hull camouflage patterns and color scheme.

Essex Hull Camouflage Pattern.jpg

This game piece is from HBG and it is sold in 5 packs, so I gave them deck numbers 9-13.

Essex Port View 1200x900.jpg

Essex Starboard View 1200x900.jpg

I’ve added two magnets so they hold 2 aircraft each. You can find these on my site here.

Looks like Tumbling Dice 1/600 scale aircraft are a decent option to fill any aircraft holes. But they run a little small, more Classic fighter size than the current A&A fighters. And for fighters, cost competitive with HBG. Twin engined heavy fighters like the PE-2, and the Ki-45 are a good match to the OOB P-38, but smaller than the OOB Mosquito.

Thanks for letting me know, must have missed that other post. Looking forward to when they are back in stock.

I use bingo chips on them…glue them on…using custom Infantry in my games I paint them to signify what they are…they work well. Also if you buy Infantry with small bases, this fixes that problem too

BAH!!! I was going to order them from https://www.litko.net/BMaker/ but if im going to custom order them I dont want to alter them. Especially if I go with something as clean as the Clear. I could go bigger… say match the size of the standard chips so they still stack nicely but i still think I will have the problem of them being top heavy in the end, especially since I want to have them 1.5" high and not just the one inch. I thnk Im going to hold out and try to snag up some 11mm dia 3mm thick steel blanks for a base. May take some time, but here’s to hoping

Hey all, new to the Axis and Allies forums and to customizing my ships. I apologize if this was answered elsewhere, but how do I size these carrier decals down to fit my ships? They look much bigger, and I’m assuming I need to arrange them onto a photoshopped page of some sort?

As a side note, i’m curious if anyone has made country symbols on a handy one piece sheet with all the countries included so that I can print out one set and decal up my whole set of models. I’m not sure if they have them in a 6mm size, or 8mm size etc.

If not I might have to try this on my own, but I didn’t want to recreate work someone else has already done.

I know a producer in Germany, who could deliver a mixture of white dashed and continous lines decals (s. picture). One decal consists of 23 white lines, each of 125 mm length and 0,75mm width, where each decal is EUR 3,50. A direct shipping from the producer to the U.S. would be very expensive, it is about EUR 35,-. If you are interested in, I can order the decals and send it to you personally. This will cause shipping costs of roundabout EUR 10 (depending on the weight…).

The decal is a digital print, that is, you have to cut out the lines. More pleasant would be a screen print, then each line is spearated from the others as a distinct decal in the printing process.

The producer also offers an individual development of decals, but I don’t know how much this is in EUR or $. If you are interested in I will ask.

Web: www.ds-design.de, english and german language

white dashed lines.jpg

You guys might want to check these sites out. Or just scroll up above this post.

@Imperious:

I found it.

http://corseceng.com/omni-stand/

This link has everything you need.  I will be using the black 30 mm stand with peg and micro magnets from the above link.

I think for global 40 sets will suffice, possibly 50. Need micro magnets for all the planes ( about 80-90) and 40 for the stands.

@Imperious:

I am combining the resources for making these bases.

This site has the proper magnets. Still looking for metal rods that are pre-cut about 2 inches.

A friend of mine has the most perfect examples. Here is what he did ( reprinted from email).

I bought the magnets from K&J Magnetics…  They were almost the smallest available size with a hole in the center to fit a 1/16" rod.

I drilled holes in pennies, glued 1/16 inch brass rod into them, placed the magnet on top and glued it down.

http://www.kjmagnetics.com/products.asp?cat=10
http://www.kjmagnetics.com/proddetail.asp?prod=RC22  ( this link has the base with 1/8 OD hole)

@Gargantua:

http://www.axisandallies.org/forums/index.php?topic=21083.0

Is a link where YOU personally link the instructional!

Also
http://www.axisandallies.org/forums/index.php?topic=21207.0

@Gargantua:

Somewhere in the customizations section a guy made a whole tutorial, with downloadable PDF’s.

Other Links

http://www.axisandallies.org/forums/index.php?topic=22472.0

http://www.downloadonline.info/dl/870394/magnetic_ac/