Here is my storage spot for the new map I picked up at the Young Grasshopper G40 Invitational.
Now that I have this awesome map, I might have to fall down the rabbit hole of getting a table…
Here is a video on the tabletop I made recently. Please check it out:
Here are a couple of pics of the table my son (16) and I built last spring. For years we have had a table top on an air hockey table, however I had a custom map printed which is larger than that table. So after looking at some tables we came up with this one and built it a little larger to accommodate the Global War map from HBG. Table is 4’ X 10’ overall.
We wanted the shelves under the table top for storage (unit trays and such) to free up table space and space around the table. Dice trays on each end and some extra space for all the “extras” you need to play Global 40, 41 & 42!
Very impressive! And the posters on the wall are a nice touch too. Thanks for sharing these pictures.
Thanks, Just starting on the walls!
Appreciate all the insight into building a custom game table.
Kudos to YG and all the videos re: this.
I’m in the process of building a table. I’ll submit some pictures when I get the requisite 10 posts.
My question is on height of the table. I have an 8’x4’ plywood with border. Standard map size.
My son is 12, I’m 6’2… Was just trying to see what the consensus was for height of the legs and the overall table. Unsure if we’d use barstools (likely) but do most people stand for this, sit for this?
Thanks so much!
My question is on height of the table. I have an 8’x4’ plywood with border. Standard map size.
My son is 12, I’m 6’2… Was just trying to see what the consensus was for height of the legs and the overall table. Unsure if we’d use barstools (likely) but do most people stand for this, sit for this?
Looking forward to seeing the forthcoming pictures. About the height question you have, my suggestion would be for you and your son to do some “reachability” tests by putting the Global 1940 map on your sheet of plywood, putting the plywood on a low table, then raising the map to various heights by putting books (or whatever) between the plywood and the table. Start low, and check to see if your son’s arms can reach comfortably all the way to the middle of the board from all four sides of the map. If so, raise it some more and repeat the test. Once the middle of the board is out of his comfortable reach, you’ll know you will have gone over the maximum allowable height, and you should therefore aim for something a little lower – but not too much lower, because a table that’s too low won’t be comfortable for you, nor for your son as he grows taller in the future.
This is based on the assumption that your table setup allows players to walk round the board on all four sides. If your table is going to be up against a wall – which isn’t recommended, because the table will only be approachable from three sides – then the table will have to be lower because players will have to be able to reach all the way across the map from top to bottom rather than just to the middle.
Good Call! Thanks for response. We are building it in the garage, but eventually will go in a downstairs room. To get it downstairs, we will have to assemble the legs/glue/screw once in the basement (wouldn’t make the corners!).
I’m just trying to plan out our eventual gaming sessions. I do like the barstool idea.
Quick update on the height. We are making the legs 35". Plywood and side mounting is 2 3/4". It is about what a table height island that you can sit at is… Put a barstool underneath.
Still unable to post pictures of the process!
We are staining the legs and base. Will have to transport the table itself downstairs, then mount it to the base once in the basement since it would be too big to navigate corners!
Thanks for the input!
So much inspiration!!
About 1,5 years ago Tjoek introduced me to the game and I have been a huge fan ever since.
Currently thinking about my own table so I’m loving this thread. Will post some picture of my own version once it is done (eventually).
Biggest challenge: making it possible to bring it along while still fitting the 219 x 100 cm version of the map…
I shared this in the thread for Siredblood’s map, but not here. Here are a couple of pics of our table, mostly finished with SB’s custom map.
I shared this in the thread for Siredblood’s map, but not here. Here are a couple of pics of our table, mostly finished with SB’s custom map.
Beautiful.
@Navymule awesome!
@Quirky-Turtle let me know what you figure out; I’m also thinking about a foldable/stowable option for this and I have tjoek’s glorious map in hand at 36" x 78".
EDIT: has anyone tried building a G40 “topper” for a (large) generic plastic folding table, like one of these: https://smile.amazon.com/Cosco-Deluxe-Fold-Molded-Folding/dp/B00DOZTM3O/ref=sr_1_8?ie=UTF8&qid=1545257945&sr=8-8&keywords=folding+plastic+table&refinements=p_72%3A2661618011
I’m envisioning a big sheet of plywood with a wooden skirt of typical design, with recessed or elevated playing surface and surrounding dead zones around the outside for dice/pieces/beer/elbows… but with a “shell” on the underside that snugly fits around the perimeter of the plastic folding table top inside it. Part of the rationale for this would be that my family could still use the underlying table for things that aren’t related to me being a giant nerd… and it would potentially be cheaper/easier to build, given that the underlying table would be subsidized by the family budget. ;)
EDIT2: @seancb has had this idea: https://www.axisandallies.org/forums/topic/29375/table-space-for-global/17
This is a little more crude than I had imagined (he actually screwed the plywood down into the top of the table, I think), but apparently it worked. Stability is my only concern- the danger of partially inebriated friends is real.
I had posted regarding my table in the past. But there was an issue with the pictures. I have a couple of videos that are linked if your interested.
Hope you enjoy!
You have to see this table to believe it;
https://www.youtube.com/watch?v=LuO5jrgSLa8
Hi there, I’d like to show you my gaming table:
@fasthard
This is a beautifully designed table, and the wood-paneled room in which it’s located looks great too. And it’s a nice touch to have added those two monitors which, as far as I can tell, keep track of which territory is controlled by which power and the current status of the national objectives. Is that how those two charts get used during game play?
