AAA50th painted minis

I should note that I have units from Classic, Revised Edition, 1941, & 1940 with some significant color variations. So in some cases I may be matching a different edition. So for example, I think the early UK units are darker than my 1940 versions explaining why I choose a darker color. Plus with the cheap paint, I worry that the color consistency is less consistent bottle to bottle.

When I indicate A + B paint colors, I mix then 1 to 1.

@cavestone I also use vallejo paints. The key question here is are you brush painting, or using an airbrush, or both?

The Vallejo paints have a “Model Air” line that comes pre-thinned. You can buy a thinning product (from them) to add to the “Model Color” series paints, which are the exact same thing, just more concentrated and thicker.

If you’ve never used an airbrush, its a bit finicky–it requires regular cleaning and a without a good brush and compressor the paint will flow very inconsistently. The process will be very frustrating unless you use the pre-thinned paints because the brush can only blow paint that is within a certain set of thickness parameters that are difficult to achieve, especially if you are trying to mix the air in the brush’s reserve or in small quantities. That’s why having copies of both Model Air and Model Color is fine by me–unlike Warhammer 40K I’m using primarily earthy colors, greens, dunkelgelb and dunkelgrau… other AFV and camoflage colors and so i don’t need a collection of primary or bright colors.

But I recommend it. The airbrush creates a sublime, beautiful layer and slight mix variations can be used to create shadows, grades, etc. Then you go back over with your brush, adding highlights, lines, details. Then, back over again with a drybrushing…then back to the airbrush to blast Flory Wash all over it.

Can’t see your photos, you can’t post photos until you have a certain post count. I wouldn’t use water to thin paints, they are water soluble but the mix and viscosity is all wrong (though water is obv. cheap and easy to clean up)

As for oil-based paints, these require thinner to clean up, they are much more difficult to drybrush with and are not used for airbrushing. The days of the old testors paints is long behind us–even apple barrel paints are easier to work with and cheaper. The early painting methods were much more about glomming thick layers of paint onto lead miniatures and the modern approach with water based paint and a series of different techniques creates much better results.

Been a while since I painted but I got the psycho paint brush and all of the Japanese units I wanted from HBG so now I will begin my goal of finishing the Japanese Air Force. Here is how I will be painting the Tony fighters. It was my first attempt at this level of detail and it will take some fine tuning but I am happy with the first one.

IMG_1840.JPG

The next group of infantry, will be, DESERT LIGHT INFANTYRY.

Until next time.

Cheers!

John

@jwo1984:

hey guys, so I was searching some camo desert schemes for HBG’s Valentine medium tank and came across this one. � However looking at the sculps I knew it would be tough to paint these blue lines in because most of the tank is all track! so I cut out and shaped some track guard armour like the photo below just using some clear flexible plastic and glued in too the sides…making these two tanks mk II’s which look to have had the side armour as a pose to the Mk V that HBG has sculpted.

I’m sure whatever you do too it, it will turn out great. Can’t wait too see it painted. Good luck buddy! :-D

@BJCard:

@Swedo:

Thank you, im not happy with the US star, i hate doing stars, they always look crooked. Tobad my russian carriers will probably never see action :(

You could just houserule a Russian carrier starting in the Baltic- hey, it is your house, your rules!

Awesome!

Guys,

@coachofmany:

very nice!
**––I’m glad you enjoyed them. Lord knows I CERTAINLY ENJOY HBG’S PRODUCTS!

Tall Paul**

what was the outcome of this?
was the pieces returned?

since its christmas please tell me this had a happy outcome  :-)

(just curious, I haven’t bought anything from mclovin)