AAA50th painted minis

Japanese A&A Pacific 2nd Edition Color Match
Hey All.
If you are looking to match the default color for the Japanese, try Vallejo Liquid Acrylic 804 Transparent Orange and Model color 140 Flat Brown mixed 30 to 1 sprayed on an undercoat of 131 Orange Brown. It’s a dead match.
alt text

@cavestone I also use vallejo paints. The key question here is are you brush painting, or using an airbrush, or both?

The Vallejo paints have a “Model Air” line that comes pre-thinned. You can buy a thinning product (from them) to add to the “Model Color” series paints, which are the exact same thing, just more concentrated and thicker.

If you’ve never used an airbrush, its a bit finicky–it requires regular cleaning and a without a good brush and compressor the paint will flow very inconsistently. The process will be very frustrating unless you use the pre-thinned paints because the brush can only blow paint that is within a certain set of thickness parameters that are difficult to achieve, especially if you are trying to mix the air in the brush’s reserve or in small quantities. That’s why having copies of both Model Air and Model Color is fine by me–unlike Warhammer 40K I’m using primarily earthy colors, greens, dunkelgelb and dunkelgrau… other AFV and camoflage colors and so i don’t need a collection of primary or bright colors.

But I recommend it. The airbrush creates a sublime, beautiful layer and slight mix variations can be used to create shadows, grades, etc. Then you go back over with your brush, adding highlights, lines, details. Then, back over again with a drybrushing…then back to the airbrush to blast Flory Wash all over it.

Can’t see your photos, you can’t post photos until you have a certain post count. I wouldn’t use water to thin paints, they are water soluble but the mix and viscosity is all wrong (though water is obv. cheap and easy to clean up)

As for oil-based paints, these require thinner to clean up, they are much more difficult to drybrush with and are not used for airbrushing. The days of the old testors paints is long behind us–even apple barrel paints are easier to work with and cheaper. The early painting methods were much more about glomming thick layers of paint onto lead miniatures and the modern approach with water based paint and a series of different techniques creates much better results.

@CWO-Marc No problem, I just couldn’t bring myself to buy a $29.00 can of paint that would never bu used. I already had the Sakrete from a Hyphatufa planting pot I made. So there ya go. As soon as I figure out how to post pictures from my IPad to this forum I’ll update it.

I have seen lots of people here use acrylics and I have on occasion. Most of my paints are enamels though. I find that is stays wet longer (which is a good thing) and doesn’t clump up nearly as much on your brush. I also use enamels in my airbrush. I find that enamels are actually much easier to clean than acrylics. While acrylics are water soluble, they don’t just dissolve, especially if already dry. It involves a great deal of scrubbing and scraping. With enamels, all you need is some mineral spirits cleaner and it takes the paint right off with very little effort. Cleaning acrylic paint out of my airbrush was hell the first time I did it… never using acrylics in there again. In terms of the finish, I can only assume that enamels hold up better to bumps and scrapes than acrylic paint does.

Someone once asked if enamels, by default, have a glossy finish to them. They do not, as long as you are using flat enamels, which seem to be the standard. I use flats and they have an excellent, non-shiny finish. I feel like enamel colors are a little deeper too, on the whole, but I suppose it depends on the brand of acrylic you use. Vallejo seems to be a popular choice for acrylics. I use predominantly Model Masters (Testors) enamels. In general, I would just said to find a brand you like to work with and produces the results you like. Don’t buy super cheap paint… you will get the results you pay for.

Good luck!

Following up:

I went out and bought a can of chrome spray-paint from a Blick arts-and-crafts store, and did a few tests on some B-17’s…

I’ll post pictures if anyone wants to see them.  It looks great.  Nice, even coating… very lustrous.  With some added details I think my late-war aircraft are going to look amazing.

Thanks for the feedback, everyone.

Wow!  Such cool pieces! (Been awhile Paul)  And there’s others I’ve yet to see that are posted -

jwo1984 and others,

––This thread shows the SHAPEWAY Capitals, Air, and Naval Bases that were designed by Ebard. Enjoy.

Tall Paul

@BluGerman:

today i managed to read through this year long forum thread and I have to ask what happened after November 17th 2011?.. did everybody in this forum mysteriously dissapear? or was it just discontinued? or was it moved to another forum thread or something?.. somebody please let me know because I was really excited to see Allworks whole board with his miniatures (they are awesome!)

In answer to your question- I don’t really know.  :? Allworkandnoclay is an artist who does all sorts of other work for money, not just Axis and Allies. I presume that he moved on to other work, as his Flickr account shows him doing some sculpting and what not. To be honest though, he stopped posting pics, people stopped commenting, and it sort of fell of the face of the earth. There’s some stuff on TallPaul’s page, and there are plenty of other artists with some awesome stuff if you need your daily fix of painted minis!