How to print these maps

@barnee said in Submarine Movement and Customized Map:

@gen-manstein

someone should roof a game store with sheets of AnA lol

I probably have enough maps to do my ceiling in the fort.

I was just trying to visual what the coolest possible legacy product for me would be.

A 3 or 4 section split map, so that its easy to move or store a set board. A rigid material that doesn’t get wet or bend, or worn from folding (since its sectional.) Something printed on metal would be coolest, because that would allow for Cyanite style magnetic sculpts and also a way to stack the sectional board, using pylons or columns like an inch or so high, you could stack a set board on top of itself with the sculpts in place for easier storage on top of a shelf or corner of a table (since A&A is such a long game that would be particularly rad).

A double sided map would be sweetest, with the obverse serving as the main base map, and the reverse something more customizable. So maybe a political historical theme for the front map (all the pretty national colors, with the labeling of things like VCs or starting territory control with little roundels etc being printed directly on it.) The reverse side could be a more stripped down build-it-yourself topographical map, showing the basic territory and sz divisions, but using movable control markers to indicate things like VCs and starting territories control. On upside down, it could then service multiple scenarios or different start dates.

Magnetic sculpts, with chips, baseplates and risers for easy grouping and stacking.

WW2 nation themed unit trays, dice, and dice tower.

The underside of the box lid itself, could serve as a large battle board field for multiple encounters per turn. Something that shows the base attack/defense power (“hits at”) in Rows 1-4, and shows moves remaining on the attacker side (“moves left”) in columns to the far right or left of each row 1-5. That way all the critical gameplay information is preserved when moving sculpts from the map to the battle box and back again. Movable battle markers could be used to indicate which square on the battleboard field corresponds to which territory or sz on the map. Since there is a lot of room on the box lid, you could also have a field/marker that is used to expand a territory or sea zone that is becoming overcrowded. Similar to the blow up boxes on the Classic map, but more adaptive.

The inside of the box base could serve (as it often already does), for rolling the dice and housing the sculpt trays, but with a tower this would make it easier to save space.

Using a sectional map rather than a folding map, with pylons everything could be stacked on top of itself, even for a set game. And then moved around easily from spot to spot. Basically a longer box, with a narrower attack profile hehe

The 1942 game map in print is 40″ x 26″ but its comprised of two folding pieces of cardboard which is harder to move around without a backing and takes up a lot of space when set. Global and AA50 also use folding maps. A rigid sectional map that was more like 12x24 in 4 panels would be larger when playing but easier to transport when set, and a lot smaller when stacked so you could have something a little closer in total size/space to the game box itself. Just a few inches taller. With magnets stuff wouldn’t shift around, so it’d be easier to leave out without dominating the room.

Then for the manual something like a gamemaster’s guide, or a players handbook or DMG in D&D but for Axis and Allies. Like with a layout of the standard rules for the scenario or campaign that comes in the box, but also with a section at the end on the history of the game, and ideas for how to customize or create new scenarios, paint sculpts, add to the game and whathaveyou.

Something like that would be platinum plus. Take all my loot hehe

Thanks! I mostly agree with your comment about per-dice research efficiency; the only reason I didn’t include additional penalties for triple-stacking your scientists is for the sake of simplicity. If you want to play with a -3 penalty, or (even better) a -4 penalty that rounds up to a -3 penalty if you roll three 1’s, then go right ahead!

Giving each Axis nation 3 tokens and each Allied nation 2 tokens tends to give the Axis an early edge in research (they will manage their first couple of breakthroughs earlier than the Allies will), but then the Allies will start to catch up and then overtake the Axis later in the war, because the Axis scientists (on average) will be more “crowded” and will take more stacking penalties.

You could bump Radar to 14 pts. or even to 16 pts. if you really want to, but there are limited opportunities to make full use of the potential synergy. E.g., suppose Germany is using a “Dark Skies” approach to ward off Allied fleets with its enormous Nazi bomber squadrons. Britain might want both Radar and Anti-Aircraft Cruisers to help protect its fleet. Russia, on the other hand, only needs Radar – they’re not going to build any cruisers. Similarly, Russia doesn’t have much use for Jet Fighters, since if it’s suffering from a strategic bombing campaign, it won’t be able to afford much in the way of extra fighters. There’s also the concern that “Heavy Bombers” has always been an overpowered technology in every version of Axis & Allies that had tech. I tried to err in the opposite direction by making the anti-aircraft techs roughly as powerful as the aircraft-enhancement techs!

There is an “Improved Artillery” tech in some of the OOB versions of Axis & Allies, and I’ve never seen anyone buy it, except maybe Russia, who really does have to count every dollar and might not be able to afford enough artillery to fully power its infantry stacks. It is really challenging to fully exploit the advantage of 2:1 artillery support is that it’s really hard to maintain the desired ratio. E.g. if I have a stack of 10 infantry and 5 artillery, then after one round of combat, I probably have something like 2 infantry and 5 artillery, and the extra artillery support becomes moot. It stays moot on defense, too, when those artillery try to hold the ground they just captured. But if I have a stack of 20 infantry and 5 artillery instead, then my army is hugely inefficient – even with 2:1 artillery support, I’m only generating 40 pips of punch on 25 units, so I’m going to give you multiple rounds of combat in which to score hits and wear down my army.

You get the same problem in reverse if you want to only boost the artillery’s native attack power. With a stack of, e.g., 8 infantry and 3 artillery, the tech would only give you +3 pips of punch – it’s just not very exciting. You could try attacking with a stack of all artillery, e.g., 10 artillery for $40, but that just seems weird and un-thematic.

Anyway, let me know if you try out the rules, with or without some modifications! I’d be curious to see how they work in live play. I’m defending my rules so you have the benefit of my opinions, but they’re just opinions, and ultimately the house rules are there for everyone to enjoy however they like…if you think you’ll have more fun tweaking the costs or nerfing a couple of the techs, then go with what seems fun! :-)

Thanks! Aside from being slanted toward the Axis like in Anniversary 1942 it is a great change of pace.

as we are learning now, 1940 is an easier year to set up, because the Axis and Allies are a little more clearley defined

Try using ANZAC pieces to represent France on the AA 50th board

France gets ….

France, Morocco Algeria, French West Africa, French Central Africa, Madagascar, and French Indochina.
A french infantry in Trans-Jordan to represent Syria, and a french canadian infantry too.

If paris falls on the first turn then at the end of the victorious nations turn (Germany or Italy) do the following. Roll a die, any French units AND/or territories (that do not contain other allied units) convert to axis units if they are the able to be reached from france by any route in the number of game spaces shown on the die. If other allied land units are present (UK) then those french units remain free french. French naval vessels are scuttled IF they convert and vessels of any other nation are present (including the allies)

On a roll of a 1 Germany gets the French Mediteranin fleet (Destroyer and Transport) and the french atlantic fleet (if the uk player took its units there as casualties and only french vessles remained after combat)
On a roll of a 2 they also get Morocco Algeria
On a roll of a 3 they cant claim any more units because there are no elegible units 3 game spaces away from france
On a roll of a 4 french west africa converts to the axis, syrian french do not convert because there are UK units there.
On a roll of a 5 french equatorial africa also converts
On a roll of a 6 Madagascar also converts.

OK so after skimming a number of threads I see a lot of similarities in house rule, can we get a quick run down of all the most popular features to be added to the map?

Not pieces or border changes but stuff like…

1. ports
2. barracks (or other infantry-generating locations)

what else?