Global Gaming Table

@hopper1999 I’ve access to both resin and PLA printers, and while resin has a couple of extra steps compared to PLA, I wouldn’t consider it painful. I’ve come to appreciate resin’s ability to show detail even in very small scale. For me its worth the extra steps to clean and cure, for those results. What’s great is there are so many free units available, with some simple editing/converting you can quickly build cool armies.
As for casting, while I haven’t casted any A&A parts yet (still building my unit library), I have casted a lot of 3.75 action figure parts. I’ve gotten best results using a syringe and pressure pot. (I converted a old paint pressure tank). You inject your mold, and then put it under pressure, I’d do around 30psi, to help the resin into the thinner parts of the mold and prevent bubbles. It also helps, when making your mold to put it under pressure as well. I’ve found it helps prevents bubbles in the silicone and between the silicone and the part being cast.
I plan on using casting to duplicate units I already have, that I can’t find stl files for.

@fieldcommander The only issue with the larger map 5x10 are the reach ranges. So if leave some space around the edges for pieces and such you might have a hard time reaching the middle of the board, like the all important Mediterranean, especially if you have short arms like me!

@Call77 A bit late to the party, but if you don’t mind, I’d really appreciate those PDFs!

Thanks for watching!

jwo1984 & Others,

––This thread shows how the Shipyard was made by Ebard re-designing his Dry Dock, adding a large wharf area, adding a second crane, several warehouses, storerooms, and supplies to the dock area including some pics of the finished painted units. Enjoy, and ask any other questions you might have.
––It Also shows his Small Naval Base and Air Base (straight) units.

Tall Paul

Thanks LHoffman,

Your appreciation is my inspiration… because I refuse to use a sheet of glass, my research has lead me to a material called styrene (google it) which is a type of plastic sheet that can be directly printed on. All indications point to this method being the last alternative to glass and although it cost around $240, it looks to be my best option. Even after flushing $300 so far in a crappy print, and installation complications, I’m happy with this new direction if it turns out the way I’ve been told it will. Basically it’s flexible plastic, so it should lie flat without air pockets getting trapped, and because it doesn’t get laminated, the colors should be slightly brighter. If it is sensitive to scratching than there is a clear film sheet by 3M I can look into, that’s where I’m at right now.

Oops. We’re playing a game tonight. My son noticed there’s no number 50.  :-o
LOL -I know what I’m fixing when this game is done. Guess I just didn’t want my age on the score chart.  :roll:

@HBG wow