Accurate Miniature Equivalents for Custom Painting your 1940 E&P

I forgot air units get two dice in convoy raiding, good reminder haha

@barnee thanks, I was inspired after watching Midway to do them like that, and to differentiate them from fighters for my less observant friends. I liked it so much I did my Stukas and Japanese tacs the same way as well.

HBG Kaga with the Standard of Admiral of IJN on its Deck

kaga 2.jpg
kaga 1.jpg

I have seen lots of people here use acrylics and I have on occasion. Most of my paints are enamels though. I find that is stays wet longer (which is a good thing) and doesn’t clump up nearly as much on your brush. I also use enamels in my airbrush. I find that enamels are actually much easier to clean than acrylics. While acrylics are water soluble, they don’t just dissolve, especially if already dry. It involves a great deal of scrubbing and scraping. With enamels, all you need is some mineral spirits cleaner and it takes the paint right off with very little effort. Cleaning acrylic paint out of my airbrush was hell the first time I did it… never using acrylics in there again. In terms of the finish, I can only assume that enamels hold up better to bumps and scrapes than acrylic paint does.

Someone once asked if enamels, by default, have a glossy finish to them. They do not, as long as you are using flat enamels, which seem to be the standard. I use flats and they have an excellent, non-shiny finish. I feel like enamel colors are a little deeper too, on the whole, but I suppose it depends on the brand of acrylic you use. Vallejo seems to be a popular choice for acrylics. I use predominantly Model Masters (Testors) enamels. In general, I would just said to find a brand you like to work with and produces the results you like. Don’t buy super cheap paint… you will get the results you pay for.

Good luck!

That is a very nice blending of colours. well done and keep up the good work.  :-D

@crusaderiv:

YG……great card…I love it.
I’ve used A&A card for long time but yours are awesome…

AL.

Thanks Crusaderiv, I’ll be making my national objective deck available first, and then I will look for time to complete my R&D deck.

@jwo1984:

hey guys, so I was searching some camo desert schemes for HBG’s Valentine medium tank and came across this one. � However looking at the sculps I knew it would be tough to paint these blue lines in because most of the tank is all track! so I cut out and shaped some track guard armour like the photo below just using some clear flexible plastic and glued in too the sides…making these two tanks mk II’s which look to have had the side armour as a pose to the Mk V that HBG has sculpted.

I’m sure whatever you do too it, it will turn out great. Can’t wait too see it painted. Good luck buddy! :-D