Re: Field Marshal Games Pieces Project Discussion thread

Are they just making sets for the seven Anniversary nations. Or will they do Anzac and France to.

This is great news FMG. Now at least we have some kind of an idea of when they might come out.

@finnman:

Are they just making sets for the seven Anniversary nations. Or will they do Anzac and France to.

They are planning on Anzac and France as well, though after the stated nations are released.  And if all goes well, I believe FMG is also planning a couple more surprises (Tech. units? Neutrals? etc.).

@Viracocha:

@finnman:

Are they just making sets for the seven Anniversary nations. Or will they do Anzac and France to.

They are planning on Anzac and France as well, though after the stated nations are released.  And if all goes well, I believe FMG is also planning a couple more surprises (Tech. units? Neutrals? etc.).

I think a lot of tech units are already included in the sets offered.  Officers could be elite or marine units, late war fighters for LRA, mech inf for you guessed it mech inf, etc…

I’d rather that FMG concentrate on getting the 6 main countries done before we even start asking for more.

I can’t wait to play AA50 with a printed out map using the Italy FMG will release and the pieces from A&A1942

:D

@bongaroo:

@Viracocha:

@finnman:

Are they just making sets for the seven Anniversary nations. Or will they do Anzac and France to.

They are planning on Anzac and France as well, though after the stated nations are released.  And if all goes well, I believe FMG is also planning a couple more surprises (Tech. units? Neutrals? etc.).

I think a lot of tech units are already included in the sets offered.  Officers could be elite or marine units, late war fighters for LRA, mech inf for you guessed it mech inf, etc…

I’d rather that FMG concentrate on getting the 6 main countries done before we even start asking for more.

I can’t wait to play AA50 with a printed out map using the Italy FMG will release and the pieces from A&A1942

:D

Well, that’s what they’re planning, yes.  To release the main nations, and then follow up with specials.  But no… the main sets do not cover the tech. units, and I’d personally like to see tech. units released as a separate set (and I might be mistaken… but I don’t think I’m alone on that).  Officers for elite or marine units? No way…

@Viracocha:

@bongaroo:

@Viracocha:

@finnman:

Are they just making sets for the seven Anniversary nations. Or will they do Anzac and France to.

They are planning on Anzac and France as well, though after the stated nations are released.  And if all goes well, I believe FMG is also planning a couple more surprises (Tech. units? Neutrals? etc.).

I think a lot of tech units are already included in the sets offered.  Officers could be elite or marine units, late war fighters for LRA, mech inf for you guessed it mech inf, etc…

I’d rather that FMG concentrate on getting the 6 main countries done before we even start asking for more.

I can’t wait to play AA50 with a printed out map using the Italy FMG will release and the pieces from A&A1942

:D

Well, that’s what they’re planning, yes.  To release the main nations, and then follow up with specials.  But no… the main sets do not cover the tech. units, and I’d personally like to see tech. units released as a separate set (and I might be mistaken… but I don’t think I’m alone on that).  Officers for elite or marine units? No way…

For me the specials aren’t even worth discussing now.  I doubt that FMG will be able to find enough demand to attempt to create sprue’s of just tech units.

26 Infantry With multiple poses we have different inf covered
12 Artillery
12 Armour With 2 models we have advanced armor covered
12 Fighters 2 models = a tech unit
10 Tac-bombers
9 Bombers Same as the fighters
12 Submarines
12 Destroyers
9 Cruisers
6 Battleships
6 Aircraft Carriers
12 Transports
NEW
6 Bunkers / Pill Boxes
3 Commander Units Tech unit fill in
4 Transport Planes Paratroopers covered
12 Half tracks mech. infantry = tech unit
12 Trucks
3 Task Force Markers (Like Pacific)

In essence all that is missing for tech specific models are jets and super subs?

Good luck paying for these when the demand is so low the sets cost 300 each.

FMG, keep up the great work and please don’t let any ridiculous requests mess this up!

@bongaroo:

@Viracocha:

@bongaroo:

@Viracocha:

@finnman:

Are they just making sets for the seven Anniversary nations. Or will they do Anzac and France to.

They are planning on Anzac and France as well, though after the stated nations are released.  And if all goes well, I believe FMG is also planning a couple more surprises (Tech. units? Neutrals? etc.).

I think a lot of tech units are already included in the sets offered.  Officers could be elite or marine units, late war fighters for LRA, mech inf for you guessed it mech inf, etc…

I’d rather that FMG concentrate on getting the 6 main countries done before we even start asking for more.

I can’t wait to play AA50 with a printed out map using the Italy FMG will release and the pieces from A&A1942

:D

Well, that’s what they’re planning, yes.  To release the main nations, and then follow up with specials.  But no… the main sets do not cover the tech. units, and I’d personally like to see tech. units released as a separate set (and I might be mistaken… but I don’t think I’m alone on that).  Officers for elite or marine units? No way…

For me the specials aren’t even worth discussing now.  I doubt that FMG will be able to find enough demand to attempt to create sprue’s of just tech units.

26 Infantry With multiple poses we have different inf covered
12 Artillery
12 Armour With 2 models we have advanced armor covered
12 Fighters 2 models = a tech unit
10 Tac-bombers
9 Bombers Same as the fighters
12 Submarines
12 Destroyers
9 Cruisers
6 Battleships
6 Aircraft Carriers
12 Transports
NEW
6 Bunkers / Pill Boxes
3 Commander Units Tech unit fill in
4 Transport Planes Paratroopers covered
12 Half tracks mech. infantry = tech unit
12 Trucks
3 Task Force Markers (Like Pacific)

In essence all that is missing for tech specific models are jets and super subs?

Good luck paying for these when the demand is so low the sets cost 300 each.

FMG, keep up the great work and please don’t let any ridiculous requests mess this up!

Huh.  I like to think it’s all worth discussing - since forums are a good place for speculation - it’s one of the ways that help companies plan. There’s some problems with using those mods on the original list for each nation as tech developments.  First off, several don’t aptly capture the development, second off, we don’t even know what developments there will be in the expanded global…
I’m not sure how a “ridiculous” (obviously an opinion) request" on a website would “mess-up” their plans… if that were the case, it would have been messed up long ago (I kinda remember a lot of other requests - some quite a bit more ‘radical’).  And I’m not too sure abouit it being ‘ridiculous’ since I believe they talked about it before… and it’s kinda limited to think such would have to be released as a completely separate set - when in all likelyhood it would probably be included with other elements so as to make it cost effective.  Even if sold in lone sets, I’m fairly certain that such sets won’t cost 300 each… which is more than one of the nation sets.  As far as demand goes… there are threads concerning it… so evidence says otherwise.  So no… don’t really need the luck but thanks!  As FMG has often said, if the results (sales) are good, they will keep producing…

Looking forward to the pics of the Italian aircraft…

cminke,

Good call on the mines - what I did was use Table Tactic’s pieces (www.tabletactics.com from the Axis & Allies Accesories set, and use the German color mines (they closely match the gray factories and AA guns we have).

You can buy the set at Fair Play Games! http://www.fairplaygames.com/gamedisplay.asp?gameid=549

Lets all remember that this project started over a year ago as a DISCUSSION.

When I made the first post I had no factory contact, no sculpts, no idea what I was getting into…  just an idea, that is all we had.

So the actual process for Italy has only taken 6 months of ACTUAL PRODUCTION WORK.  Not bad I think.

We are determined to do this ONCE and do it RIGHT, so I can not hurry any aspect.

They will come, and they will knock your socks off!

@FieldMarshalGames:

They will come, and they will knock your socks off!

Oh great.  Now I’m going into this with my socks pre-knocked off … spoiler alert next time!  ;)

@FieldMarshalGames:

Lets all remember that this project started over a year ago as a DISCUSSION.

When I made the first post I had no factory contact, no sculpts, no idea what I was getting into…  just an idea, that is all we had.

So the actual process for Italy has only taken 6 months of ACTUAL PRODUCTION WORK.  Not bad I think.

We are determined to do this ONCE and do it RIGHT, so I can not hurry any aspect.

They will come, and they will knock your socks off!

Got a couple of questions here:

1. Can you make the carriers so that they comfortablely fit tac bombers and fighters on unlike the Hasbro ones that fall off sometimes too easily???

2. Can you keep the same colors for the units as the actual game???

USA- GI green,
UK- tan,
USSR- Merlot,
Germany- Charcoal Black,
Japan - Burnt Orange,
China- lime green,
Italy- Rust Brown,
ANZAC- pewter,
France- royal blue (I assume)

@questioneer:

1. Can you make the carriers so that they comfortablely fit tac bombers and fighters on unlike the Hasbro ones that fall off sometimes too easily???

Use magnets.

@questioneer:

@FieldMarshalGames:

Lets all remember that this project started over a year ago as a DISCUSSION.

When I made the first post I had no factory contact, no sculpts, no idea what I was getting into…  just an idea, that is all we had.

So the actual process for Italy has only taken 6 months of ACTUAL PRODUCTION WORK.  Not bad I think.

We are determined to do this ONCE and do it RIGHT, so I can not hurry any aspect.

They will come, and they will knock your socks off!

Got a couple of questions here:

1. Can you make the carriers so that they comfortablely fit tac bombers and fighters on unlike the Hasbro ones that fall off sometimes too easily???

2. Can you keep the same colors for the units as the actual game???

USA- GI green,
UK- tan,
USSR- Merlot,
Germany- Charcoal Black,
Japan - Burnt Orange,
China- lime green,
Italy- Rust Brown,
ANZAC- pewter,
France- royal blue (I assume)

To answer a few questions:

1. The Next Nation we are doing is JAPAN
2. The Tac bombers will fit on the Carriers.  We are making them abit smaller but larger than the fighters so they are easily identified.
3. We will be matching the colours to our COMBAT DICE, which are very close to the AAA colours (Which change from game to game)

JEREMY!!!

Please say that you will match the colors to the combat dice…. EXCEPT for Germany! By now, it is pretty well established that black is the color for Germany - please don’t do anything else!

Ummm, my Axis and Allies has Germany as gray and I think it is just fine.

@reloader-1:

JEREMY!!!

Please say that you will match the colors to the combat dice…. EXCEPT for Germany! By now, it is pretty well established that black is the color for Germany - please don’t do anything else!

I think it’s actually deepest gray that you mean.  :-D

Axis & Allies 1942
Axis & Allies Bulge
Axis & Allies Anniversary
Axis & Allies Europe 1940 (upcoming)

All have Germany as dark black. They only different colors have been Axis & Allies Europe (out-of-print) and Axis & Allies Revised (out-of-print). Avalon Hill has expressly stated that they standardized the Axis & Allies Colors among all their games (see above list) - I am only suggesting that FMG do the same.

@reloader-1:

Axis & Allies 1942
Axis & Allies Bulge
Axis & Allies Anniversary
Axis & Allies Europe 1940 (upcoming)

All have Germany as dark black. They only different colors have been Axis & Allies Europe (out-of-print) and Axis & Allies Revised (out-of-print). Avalon Hill has expressly stated that they standardized the Axis & Allies Colors among all their games (see above list) - I am only suggesting that FMG do the same.

It’s not black.  It’s dark Grey, as noted by Viracocha.

I imagine they’ll have to cast in dark gray (what you refer to as black).  If they match the dice color, they’ll end up with units only a shade different from ANZAC.  While these would probably still be easy to distinguish for most of us regardless, as it won’t match completely, that would be irritating.  I’d prefer ANZAC fmg units (if they’re made or recycled from UK units) to match closely to OOB Anzac and 3 slightly different medium gray variations (OOB, FMG ANZAC and FMG Germany) would be unfortunate.  And if there aren’t FMG Anzac, I’d still hope that German units are more similar that different from their OOB color, rather than somewhere between OOB Anzac and Germany.

@FieldMarshalGames:

3. We will be matching the colours to our COMBAT DICE, which are very close to the AAA colours (Which change from game to game)

Jeremy is correct on this one. In all of the A&A games that I own, Hasbro has changed the colors or shades of colors in each title. Sometimes even in different production runs of the same title (Can anyone say Red Japanese in AAP). I currently have German pieces in five distinct differing shade of gray, & British in at least four shades of tan.

@reloader-1:

Axis & Allies 1942
Axis & Allies Bulge
Axis & Allies Anniversary
Axis & Allies Europe 1940 (upcoming)

All have Germany as dark black. They only different colors have been Axis & Allies Europe (out-of-print) and Axis & Allies Revised (out-of-print). Avalon Hill has expressly stated that they standardized the Axis & Allies Colors among all their games (see above list) - I am only suggesting that FMG do the same.

I agree wholeheartedly here.  If you call that grey- it is a VERY VERY DARK GREY- CHARCOAL is what I call it.  FMG should match the DICE with the current AA40 game piece colors not the other way around. :-)