@The-Captain
I used 3mm thumb nuts drilled out to fit 3mm acrylic rods. I used a number of 3d printed jigs for cutting the rods, assembly of the stands and gluing the magnets. If I remember later I’ll attached some pictures of the jigs/stands
Sired's custom pieces box dimensions
-
Re: My new project "National Battle Boxes" -updated 1/7
Does anyone know what the dimensions were/are on Sired’s boxes for his miniatures, referenced in the above thread? I want to make my own boxes bit I’m hoping to get those dimensions first. Thanks.
Bill
-
I’ll see if I can reach him.
-
Thanks, SS GEN. Much appreciated.
-
You go to his you tube channel ? Everything is there I believe.
-
@SS-GEN
Will do. Thanks
Suggested Topics
