Or maybe noting zombie kills per nation and for every X number of kills tech is achieved.
Custom 3D Miniatures: Major & Minor Industrial Complexes, Recruitment Center, Airbase, and Naval Base
-
@Midnight_Reaper said in Custom 3D Miniatures: Major & Minor Industrial Complexes, Recruitment Center, Airbase, and Naval Base:
You’ve got some really great pieces here. Thanks for taking feedback and turning it into awesome pieces. You rock!
-Midnight_Reaper
Thanks!
Here’s everything so far:
-
You have an impressive set of factories and markers. All you need to complete the set is a flat Recruitment Center, to go with the flat Naval Base and Air Base markers… :stuck_out_tongue_closed_eyes:
-Midnight_Reaper
-
Recruitment Center token :) Thingiverse Link
-
A question on recruitment centres. Are people house ruling them into all A&A games?
If so, what cost do you put them at and how may infantry can you place in one?
Thanks and the models look great.
-
@robert-t They cost 10 IPCs and can produce infantry up to the IPC value. If you place one on an 3 IPC territory, you can buy and place 3 infantry there.
Personally, I’m not house ruling them in, yet. But they can be purchased if you play AAZ 1942 putting a chip under an existing IPC to indicate recruitment center isn’t, IMHO, the best option.
-
@robert-t said in Custom 3D Miniatures: Major & Minor Industrial Complexes, Recruitment Center, Airbase, and Naval Base:
A question on recruitment centres. Are people house ruling them into all A&A games?
If so, what cost do you put them at and how may infantry can you place in one?
Thanks and the models look great.
Try these rules for house ruling Recruitment Centers into your other A&A games.
Standard rules for Recruitment Centers:
Recruitment Centers are a new type of IC, that came in with A&A&Zombies. Recruitment Centers cost 10 IPCs and you can place only infantry there, as many infantry as the value of the territory. Other than that, they act just the same as normal ICs - build, damage, repair, built in AAA, all the same. You can upgrade from a Recruitment Center to an IC for the cost of 8 IPCs. Only undamaged Recruitment Centers can upgrade (repair cost can be paid at the same time as upgrade costs).The above rules work with games that only have one type of IC. For the 1940s games (Europe, Pacific, and Global 1940), I would do this:
Recruitment Center:
Has same rules as minor factory, except cost is 10 IPCs and you can place up to 3 infantry, and only infantry units. Can upgrade to a full minor factory for the cost of 5 IPCs. Only undamaged Recruitment Centers can upgrade (repair cost can be paid at the same time as upgrade costs).That should about cover it.
-Midnight_Reaper
-
Thanks for the replies.
They look like they could add a new wrinkle in the A&A games. Definitely India and China would benefit from using them.
-
@vdot
So, you’ve done up all of these cool new sculpts, and linked them in ThingVerse. Could you tell us, the uneducated, how to move from looking at these pieces to getting them printed out and shipped to us.
I think they’re great, but looking at them is all I can do, as I don’t know how to proceed from there.
Thanks in advance!
-Midnight_Reaper
-
@Midnight_Reaper said in Custom 3D Miniatures: Major & Minor Industrial Complexes, Recruitment Center, Airbase, and Naval Base:
@vdot
So, you’ve done up all of these cool new sculpts, and linked them in ThingVerse. Could you tell us, the uneducated, how to move from looking at these pieces to getting them printed out and shipped to us.
I think they’re great, but looking at them is all I can do, as I don’t know how to proceed from there.
Thanks in advance!
-Midnight_Reaper
Well, the next step for me is testing. I expected to have parts in hand faster than this (I submitted my prints to the internal queue days ago, normally faster turnaround than this). If they come out ok, I’ll try batching them up on Shapeways. That will make them available for anyone to pay to have them printed and shipped out to them. I’ve never used Shapeways before, so there is a bit of a learning curve for me too, like what qtys are the most cost-effective and how to link parts together to cut costs, etc. I would love to print these off on the company machines and sell them at cost for you guys, but that is basically the one thing we are NOT allowed to use the printers for :p
What quantities would people be interested in printing, so I know how many to batch up? Shapeways doesn’t strike me as terribly affordable, but definitions of affordable vary… I’ll be looking at Ebard’s Shapeways shop for inspiration and reference :)
For those of you with a 3D printer, you’re good to go- These designs aren’t all completely desktop-3D-printer friendly (some of them are), but with support material even the unwieldy should come out just fine. I tried to keep the smallest details at 1MM, so resolution should not be a problem. Do let me know if any of you try it and have issues.
-
I’ve got a desktop 3D printer in my cube here at work, so while I wait for the (apparently backlogged) jobs on the fancy printers I’m printing a test run of the miniature-style pieces. Will post results. I expect the ICs to look great, and the others to look… terrible or completely malformed. Those watch towers are not designed for a single-extrusion printer at all.
-
Update: Well, in some ways these turned out better than I expected, but in most ways, much worse: the desktop 3D printer in my pod has a ton of jitter so that even the bits that should have been a piece of cake (like the ICs) came out pretty terrible; each layer has some arbitrary XY shift on the order of 0.1-0.2mm which is a ton at this scale. On the plus side, however, very little support ended up being needed to build the tricky bits- even the watchtowers stood up alright. If you’ve got a 3D printer that normally gives you pretty good results, I say give these a try and see what happens.
I’ll post again once the shapeways-representative prints come off the company printer :)
-
I made these without seeing the two threads below; I’m obviously not the first foray into amateur/custom 3D-printed minis! Anyone looking at these should check out these two older threads as well:
https://www.axisandallies.org/forums/topic/28327/custom-facilities-project
https://www.axisandallies.org/forums/topic/30693/air-base-naval-bases-hbg-shapeways -
Yeah, Combat Miniatures is a bronze sponsor of the site, everybody should check out @Johnson73 's great work.
Dave Jensen, Founder of Axis & Allies .org
-
For anyone who hasn’t seen m_bergman’s incredible (and free!) collection on thingiverse yet, please go check it out- Hundreds of accurate 3D models in 1:200 scale, including armor, trucks, and misc. combat vehicles from 1940-present day.
Pack 1: https://www.thingiverse.com/thing:232248
Pack 2: https://www.thingiverse.com/thing:310476
Pack 3: https://www.thingiverse.com/thing:539511
Pack 4: https://www.thingiverse.com/thing:1138822I got sextons, priests, and hummels off the company hardware today. I further shrank these by 30-40% to get closer to 1:300 scale:
-
@djensen any chance we get a sticky for 3D models, free and otherwise? These collections need curation…
-
Yeah, start a topic, let me or Panther, or any other moderator know which topic to sticky and we’ll do it.
-
@vodot these look amazing! I can only dream of this quality print work. (Or go the shapeways route offcourse)
-
Yeah, Shapeways is so flipping expensive! 0.o
RE: the SPAs and Tanks, I could not believe it when I saw m_bergman’s collection. I’m a little embarrassed I haven’t already printed off all of his work, since I have no excuse… except for the fact that I need to at least occasionally be productive at my job.
-
Finally got my test prints off the company printer! Pic below. The IC is the same size as the OOB IC, for size comparison.
I also shrank the self-propelled artillery pieces by a further ~20%, so I should be down to about 1:350 scale now, which should look better on the board given how tiny the OOB Mech Infantry are. I’ll post comparison pics of OOB pieces with the new smaller hummels and sextons (priests were omitted from this print, unfortunately) from home tonight. For anyone looking to replicate, grab the 1:200 3D files from m_bergman and shrink by ~45% before printing.
-
Woah, cool!
Suggested Topics
