PLEAASE TELL ME THERE IS A PDF FOR THIS FILE???

Sorry only just saw this

So step one would be finding the right image editing program for what you’re trying to achieve. TripleA uses raster graphics images (basically png) and is not suitable for printing. Upscaling the largest relief I’ve made in tripleA and trying to print it at 600 dpi the filesize gets quite beefy. Basically an image that’s like 50mb for use in tripleA is going to climb way up by orders of magnitude into the many gigabytes. It will also tax the RAM pretty hard if you’re trying to edit an image that large (in actual dimensions) like trying to use multiple layers at once. I have a pretty high end gaming laptop and I topped out around 8000p before GIMP started giving me headaches and slowing to a crawl.

What you probably want is an image that you can manipulate as SVG rather than PNG. A vector so you can upscale the image to any dimensions that way (basically the same way font works.) I would try Inkscape or Adobe, and try to get a pull of the image as a vector graphic.

You can start the same as you would in tripleA by creating a baseline image of the basic world map, the continent contours or world warp you want and the territory or sea zone divisions, showing just the basic borderlines in 100% black at 1px width at the desired dimensions for the digital thing.

A physical print would be much larger, so imagine that on your screen you got 72p per inch, on paper that needs to be 600 dpi. You can go lower say 300 dots per inch if it’s very graphic, but a photo quality print is basically like 600p, which is pretty hefty. In a program like inkscape or illustrator etc you can translate a raster image into something that works for stuff like signage, you know, so like making a giant banner image to put on the side of a truck or hang outside a building - same sorta deal here for the scale of the image you’d want to make. Probably the size of a 6 or 8 foot banquet table, possibly larger depending, on what you’re trying to pull off.

If you have the map drawn out at scale, you can scan in sections at A3 or A4 size with a flat scanner and then reassemble the image, to pull it at the highest resolution you can before bringing that image into inkscape to create a vector of it.

ps. here are some youtube tutorial videos on inkscape just to see what sort of stuff I mean. You can probably find more just pulling at those threads. Once you have a map design you can put in tripleA to playtest it by creating a baseline from your svg, exporting the image as a bitmap or png where the borderlines are just solid black ideally at 1px width for those lines, or as close as you can get. For a map image something that’s like 2000-4000p tall and about twice as wide or larger works well for digital sculpts which are png images at 48-54px tall up to 125% currently in tripleA. The map size in tripleA is sorta limited by the unit graphics sizes and the windows in the UI. In inkscape you can make it larger, like for whatever makes sense to have the print look decent. Anyhow, just a quick example you can skip around to see

https://www.youtube.com/watch?v=6Ns028ihACs&list=PL_NagE_y_IhIBNAzw3nFBiF01OKnaltmJ

https://www.youtube.com/watch?v=DnqtnSTe6qM

https://youtu.be/kS2nrXuR128?t=2611

for tripleA you can use GIMP to make the relief images in png. Here’s an example of similar videos in that program

https://youtu.be/HLmOpEETjEo?t=646

@matttodd1 sounds awesome as they are great cards. Would it be possible to do an oversize set as well as a regular set on make playing cards kind of how bbr has had both size options? Thanks!

Im not talking about a digital Map, but a real one. I consider myself very artistically minded so I think I could do it without it looking too bad. What materials would I need, how much time would it take? I wanna do a global map from about 1920.

Hey everybody! I have decided to add Poland as an A&A player in 1940, even though it fell in 1939. Many brave men fought on and hated surrender. Poland starts off with 0 IPC’s because its capital, Warsaw, is in enemy hands and it’s one of G40’s many victory cities. I know the game takes place in June 1940. The Poles were brave fighters under French, then British command, as well as Soviet command. Anyway, I add one gray (Poland’s colors) plane to the United Kingdom, 1 infantry in Syria. As soon as France falls, the unit in Syria will escape to Transjordan.

Why is Iraq a “pro-Axis” neutral, even though it was under British control? Iraq was a British vassal state at the time. The British had units stationed in Iraq in 1940. Maybe replace Iraq with Spain to balance out the pro-Axis neutrals? Spain had volunteers on the Eastern Front in what was called the Blue (Azul in Spanish) Division. Franco was thinking of joining Hitler in June 1940 to allow him to blitz into Gibraltar. German ships were serviced in Spanish ports. I think that there should be 2 UK infantry in Iraq and that it should be under the UK Europe economy, plus 1 UK fighter in Iraq.

The Polish forces in Soviet gulags will escape to Iraq, after being freed by the Soviets to fight for the British. 1 Soviet infantry will be placed on Iraq and the Soviet Union does not own the territory, the UK does. The British used their units in Iraq to put down the pro-Axis rebellion in 1941.

Since everything 1941, takes place in 1940, we’ll do that. Southern France will be under the control of Germany or Italy and 1 French infantry shall be kept on Southern France. The French units in Southern France will fight against Germany or Italy invades the territory, as normal. After Southern France falls 1 French infantry shall be placed there to represent Vichy France. The France player will go down 3 IPC’s and Germany will go up 3 or Italy. The French units in the setup in Southern France will fight as normal units against the Axis. After they are destroyed by Germany or Italy, Italy or Germany puts their roundel on Southern France and IPC chart is adjusted accordingly.

After the territory’s French units are destroyed by the Axis. the France player will place 1 infantry on Southern France after Germany’s non combat movement phase or Italy’s. But the territory will be controlled by either Germany or Italy and the IPC’s go to the Germany or Italy player, after Germany takes France and France’s IPC’s will go to Germany or Italy. On Germany’s turn, France shall be invaded and fall to the Axis.

Then the artillery will be removed from Southern France and replaced with only 1 French infantry unit and the territory shall be placed under the Germany players control, after placing its roundel on Southern France. Southern France can also be invaded on Italy’s or Japan’s turn.

In the Global setup, after France has surrendered her IPC’s, Japan shall place 2 infantry on French Indo China for free, and Japan’s roundel, during Germany’s collect income phase on the turn that France falls.

1 Polish destroyer shall be placed in SZ 110 for free. After the combat phase is complete for Germany on turn 1, the 1 French infantry will be placed on Southern France and Japan shall place 2 infantry on French Indo China, for free. Just trying to simplify Vichy here and the Polish Forces in Exile.

The French units in French Indo China will be destroyed by Japan, after Germany’s combat phase is completed. Japan shall get French Indo China and this will not affect relations between them and the United States for Japan’s collect income bonus.

France will not be allowed to buy any new units of any kinds, as their capital of Paris is in enemy hands any units bought by France will be removed from BEING placed on the board and will go back in the box. This is on France’s turn or any of their turns, once an Axis player gains control of France and when France’s IPC income is surrendered after France falls, during Germany’s turn at the end of their collect income phase.

In the Global game, Germany must invade France first during Germany’s turn. Germany attacks France first.

I forgot air units get two dice in convoy raiding, good reminder haha

@Call77 and its not finished like I have said a few times

@TheMarshall said in 1940 reference cards:

National Objective cards can be found here:  http://www.mediafire.com/?sgz3gr48qxs6l

Looks like you are missing Japan 1 National Objective card in MediaFire download. Can you submit that?

@Azimuth yeah, I understand the challenge, I’m a graphic designer and I was playing around with a circular map design when I stumbled upon yours. I still might finish my design as I was incorporating some map changes I found interesting. But so far I think I’ll need some blow up boxes or something to make it work at a reasonable size.

@barnee

Awesome

Has anyone tried putting edge markings on the chips to make chip stacks more readable?

@vodot Thanks!

Hi @Nuts, welcome to the forum!!

RE: new units, I think there are some fun options and at least one no-brainer: if you’re playing G40, those Somua S35’s go right in as drop-in replacements for the blue T-34s in G40! Finally!!

Pzkpfw IV’s should also go right into the german armor unit mix, of course, especially for the first few german tank builds, along with the ubiquitous Panthers and a Tiger or two from 41. For G40 the CMP Trucks and LRDG Jeeps can do the same for British Mech Inf., since both the Italians and Russians (and French… sigh) already use use a Truck/Truck-ish sculpt for Mech Inf anyways.

The problem with the rest of the units is the limited number of powers with the sculpts available.

The Tactical Bombers are great but if you aren’t already into G40 then you’re only getting a handful and for only a few powers. Do the British and Americans get them? I only see German & Italian Tactical Bombers so far. The Sd.Kfz armored cars make for great Light Armor pieces, but there’s only Germany and Italy represented. The 6-Pounder’s can swap in/out for British artillery in most systems. I don’t play with dedicated AT guns - and then, only the British have a sculpt.

There’s the multiple copies & paint option, of course… but if you’re buying multiple copies to paint units you’re much better off looking at all of the incredible community support and high-detail sculpts that have been created for A&A at places like HBG, IWNGU, Combat Miniatures, and even my own web store.

Has anyone made a combined and concise rulebook for Global 1940?

Introducing new players to the game and handing them 2 rulebooks and pointing out that some rules are stuck at the back of the books separately does not help the learning curve at all.

So I started thinking about putting something together, but wanted to see first if there’s anything existing.

Hi @Timothy-Gengarella, I never found good printable artillery files for A&A so I drew up a few, including a generic “Advanced Artillery” piece for use in systems that use them, including GW36.

10aa47fa-e0b8-4900-b813-06e326e547f0-image.png

6aad1843-59e2-4adc-8030-18f58f734f64-image.png

Shot you a PM with some details :)

@conquisitore
That is the right kind of price!
I might try harder to find someone who can do that for me here

@Pine-of-England YES! Thank you!!!

EDIT: Here is the the text data file - after downloading, rename the file below from *.txt to *.otf, then right-click --> Install.

Delta Jaeger Book Regular.txt

@MajorJoey

Hi Joey,

Thanks for your comment - I can confirm, that it has been time consuming to get this far with the Axis & Allies War Room.

But most importantly - it was worth the effort - and we continue to have tons of fun & challenge playing Axis & Allies.

You can find more pictures on this forum at the House Rules section - look for Global 1940 & 1943 Game Reports.

Best regards
Captain

i like it