The bridge from Sydney is pretty disappointing. It’s too small. Other than that I really like my set. They double as factories on my capitals.

Agreed.

@Der:

Cool - go to the last page for latest downloads (7.0)!

Missed that. Thx.

You guys might want to check these sites out. Or just scroll up above this post.

@Imperious:

I found it.

http://corseceng.com/omni-stand/

This link has everything you need.  I will be using the black 30 mm stand with peg and micro magnets from the above link.

I think for global 40 sets will suffice, possibly 50. Need micro magnets for all the planes ( about 80-90) and 40 for the stands.

@Imperious:

I am combining the resources for making these bases.

This site has the proper magnets. Still looking for metal rods that are pre-cut about 2 inches.

A friend of mine has the most perfect examples. Here is what he did ( reprinted from email).

I bought the magnets from K&J Magnetics…  They were almost the smallest available size with a hole in the center to fit a 1/16" rod.

I drilled holes in pennies, glued 1/16 inch brass rod into them, placed the magnet on top and glued it down.

http://www.kjmagnetics.com/products.asp?cat=10
http://www.kjmagnetics.com/proddetail.asp?prod=RC22  ( this link has the base with 1/8 OD hole)

@Gargantua:

http://www.axisandallies.org/forums/index.php?topic=21083.0

Is a link where YOU personally link the instructional!

Also
http://www.axisandallies.org/forums/index.php?topic=21207.0

@Gargantua:

Somewhere in the customizations section a guy made a whole tutorial, with downloadable PDF’s.

Other Links

http://www.axisandallies.org/forums/index.php?topic=22472.0

http://www.downloadonline.info/dl/870394/magnetic_ac/

@siredblood:

@GeneralHandGrenade:

I couldn’t find any magnets that thin. I just redid mine yesterday and had to use thicker ones. Good job Sired.

I don’t know if they have Home Depot in Canada, but that’s where I got it, if not, you can find it here :

http://www.homedepot.com/p/MASTER-MAGNETICS-3-4-in-x-26-ft-Magnetic-Tape-with-Dispenser-96774/204752648?cm_mmc=Shopping%7cTHD%7cG%7c0%7cG-BASE-PLA-D25H-Hardware%7c&gclid=CN-u3In81tECFUi2wAodQuQIAA&gclsrc=aw.ds

It has bad reviews lol, but it works good, just don’t stick to anything. However the drop of super glue seems to work, as they have never fell off.

Thanks for the comment cyanight, all your magnetic mods are pretty amazing!

We do have Home Depot (all over the place here), but they don’t seem to carry Magnetic Tape.,… well, they do, but it’s this stuff : https://www.homedepot.ca/en/home/p.12-x-10-magnetic-tape.1000418120.html?autoSuggest=pip which wouldn’t work as it’s a LOT thicker.

I HAVE however seen that stuff at Micheals Arts and Crafts. You’re right, it doesn’t stick well (or at all) so superglue is a must.

Thanks John, ill update this thread once more later when I finish those other troops… Oh I also replaced the some of the Japanese artillery with some from HBG, after which, I kinda liked the OOB ones better lol.

@WorldWideArmy:

Hi All,

After building a custom table for my global 40 setup I was looking for other maps to use on the table.

Surprisingly I found there aren’t really any available in this size so I decided to spend a bit of time creating them from some of the great resources available.

If your looking for a copy of AA50 that fits your game table, you are in luck sir!

Download it here:

-http-boardgameconsole.com/AA50(Printable)32x70.pdf-

I’m considering building Guadalcanal next… what do you all want?

Frank

This link is broken…

Baron, here are the pics of both tables. G39 close and G40 in back with some of your mods. Process of remodeling.

image1.JPG

Thanks for the advice!  I will try a different primer.

@siredblood:

@IWillNeverGrowUp:

That angled divider in the UK box is going to be a pain to use I think.
I always find corners in deeper boxes like this to be difficult (at least they are in mine), especially as they get tighter like those angles.

Its been game tested! I added so many units to each country (well not China) you will never need to empty anything. I was UK last weekend, never saw the bottom of the box :) If one was in the corner, you can always use a sub to get it out haha.

I wasn’t fond of the angle idea, but it best fit the units with those bombers.

Well, if you never get to the bottom that would be alright. I just pictured trying to pick them out of there and it hurt my fingers thinking about it. lol

@AlphaKappa:

I don’t like the large size of the OOB Dauntless tactical bomber piece.  I am considering replacing them with the HBG P-47 Thunderbolt or Helldiver.  What are the sizes of these pieces?   The P-47 looks bigger than a typical fighter.  Would it work as a tac?

I have the HBG P-47 fighters… they are the same size as the OOB fighters… by comparison, they are bigger than the HBG P-51, which is actually smaller than OOB fighters.  If you’re expecting the HBG P-47 to be as big as OOB Tac Bombers, you’ll be disappointed.

Hey Everyone,

Just joined the forum because I was looking for ideas on customizing my new G40.  It’s awesome to see all the information that you guys are posting.  I’m just learning how to navigate through this forum and I’m looking forward to be a part of the community. Sorry if this is the wrong section to say hello.

Has anyone played with the house rule that ignores the trench warfare? We like it playing more like the original? Also what other rules do you use to make the game more fun.

The three stack setup is just there to give me a visual difference as I will still use the two stack ones for minor complexes in g40. I like the original look but wanted a quick way to still know it is different. I am an engineer and now I have access to a 3D printer so I’ll be designing some more custom pieces.

Christmas bump.

'tis the season : ) worth a listen : )

Looks like you have a pretty good collection already. I have about $100 invested after buying both of the global games and still nowhere close to where I want to be. Nice setup though

When I painted my units, I had issues with Britain, I originally made 2 schemes, then decided I only wanted the tan, not green… On my painting, I used a combo of lacquer Enamel and acrylic, it was at the enamel stage, but I soaked them in paint thinner (in all preparation to consider them toast and order new units)… but they came clean, they soaked for 10 min or so, and I used my tooth brush (yes mine lol, bristle’s turned green, and yes, I still use it, the green faded away HAHA) to scrub away the paint film.

I’ve always had a problem with HBG’s “orange” Japanese units not being of the same tone of orange from OOB A&A… most other colors of custom HBG units seem to match pretty good, but that orange always seemed off to me… so much so I’ve never kept a custom HBG Japanese unit in my nation bins… sad, cuz I really like some of them.

(and yes, I’m one of those anal-retentive guys where if the color is just off a tad, it “ruins” it for me… I know I’m odd that way).

P.S.
Dang, I just realized this forum won’t let you use the first three letters of Japanese units without blanking it out as a profanity.

I posted this last year, but in case anyone didn’t see it or wants to find it again (wish there was a stickie that appeared each year after Thanksgiving and disappeared after Christmas), here is a World War 2 Christmas themed playlist to play as a background to your A&A games:
https://www.youtube.com/playlist?list=PLHdtjQ501JyX4TbHlIOfjfYjzD11CVhtQ

I’ve also found it to be a neat thing to play in the background while hanging around the house, though my wife’s not too fond of it.  Enjoy!